Use of IF_COP_CORE was mistakenly introduced as part of 89acde6af2,
effectively short-circuiting multiple tests resulting in the code
paths always being executed, on both cores.
Use the correct macro, so per-CPU paths are handled properly.
Change-Id: Id346cf759fc1b06b7d56694d7af1f469caf785a4
This appears to finally fix the issue
turns out the status register we were writing was only for the CPU
COP cache flush wiped out the CPU cache
--
Added some defines to cut down on the magic numbers
Added some comments explaining such
Set the address to full 20 bit address
0x1FFFFF which is then left shifted 11 internally -- somewhere around 4GB?
Link explains the cache status bits
https://daniel.haxx.se/sansa/memory_controller.txt
Change-Id: I57b7187c2f71a5b54ce145bf3a21ed492a8993cb
ATA DMA was enabled for all PP502x targets in d118f47 after previously reported instabilities were thought to have been fixed. The iPod 4G target remains unstable when UDMA 2 is enabled. File system corruption will eventually occur even using stock hardware in normal usage, according to both my own experience and that of several other forum users. UDMA 1 appears to be stable.
Change-Id: I8526bad9e879f5dad5174cfe07cd8828d8b72406
* pcm_get_bytes_remaining()
* pcm_calculate_peaks()
* pcm_get_peak_buffer()
Nothing in-tree uses these at all (except for the lua plugin wrapper)
Change-Id: I971b7beed6760250c8b1ce58f401a601e1e2d585
Some mSATA adapters seem to have trouble working with Rockbox using our
normal PIO timings; the timing value we use is probably out of spec and
is different to the OF. Switch to using the OF's timings according to
which PIO mode we select. This may not completely resolve problems with
these adapters but allows Rockbox to boot and play audio.
Change-Id: If73210700eb4af01864b373709ee1d15c775fb11
Nothing in the core has used it for some time. It's exported to the
plugin API but the last plugins to use it were switched to the mixer API
back in 2011.
This allows us to get rid of pcm_play_dma_pause() from all audio drivers
Change-Id: Ic3fa02592316f84963e41d792d1cabb436d1ff6b
I'm currently running up against the limitations of the lcd_draw functions
I want these functions to be able to be used on any size buffer not
just buffers with a stride matching the underlying device
[DONE] allow the framebuffer to be decoupled from the device framebuffer
[DONE need examples] allow for some simple blit like transformations
[DONE] remove the device framebuffer from the plugin api
[DONE}ditto remote framebuffer
[DONE] remove _viewport_get_framebuffer you can call struct *vp = lcd_set_viewport(NULL) and vp->buffer->fb_ptr
while remote lcds may compile (and work in the sim) its not been tested on targets
[FIXED] backdrops need work to be screen agnostic
[FIXED] screen statusbar is not being combined into the main viewport correctly yet
[FIXED] screen elements are displayed incorrectly after switch to void*
[FIXED] core didn't restore proper viewport on splash etc.
[NEEDS TESTING] remote lcd garbled data
[FIXED] osd lib garbled screen on bmp_part
[FIXED] grey_set_vp needs to return old viewport like lcd_set_viewport
[FIXED] Viewport update now handles viewports with differing buffers/strides by copying to the main buffer
[FIXED] splash on top of WPS leaves old framebuffer data (doesn't redraw)
[UPDATE] refined this a bit more to have clear_viewport set the clean bit and have skin_render do its own screen clear
scrolling viewports no longer trigger wps refresh
also fixed a bug where guisyncyesno was displaying and then disappearing
[ADDED!] New LCD macros that allow you to create properly size frame buffers in you desired size without wasting bytes
(LCD_ and LCD_REMOTE_)
LCD_STRIDE(w, h) same as STRIDE_MAIN
LCD_FBSTRIDE(w, h) returns target specific stride for a buffer W x H
LCD_NBELEMS(w, h) returns the number of fb_data sized elemenst needed for a buffer W x H
LCD_NATIVE_STRIDE(s) conversion between rockbox native vertical and lcd native stride (2bitH)
test_viewports.c has an example of usage
[FIXED!!] 2bit targets don't respect non-native strides
[FIXED] Few define snags
Change-Id: I0d04c3834e464eca84a5a715743a297a0cefd0af
The right thing here probably to just not bother at all, as this
bootloader can't launch rockbox yet anyway.
Change-Id: I62bd22353b6adc9dbe35b94f3b60a6a67348356a
(we were trying to foward-declare functions from within static
initializer context. GCC no longer accepts this)
Change-Id: I58f316ecc84c8ab45fffc054955727a55714b0a3
Allow IPod 3rd generation to recognize when USB is connected and reboot into disk mode.
This problem is listed at the bottom of the Ipod status page https://www.rockbox.org/wiki/IpodStatus
Change-Id: I8f32afd065d3a91cddc56fe63454bd082bfa29b9
If we come up and the RTC is in a reset state, we need to release that
before trying to initialze anything else. (See IMX23RM 23.8.1 and 39.3.10)
Change-Id: I1820ab771ba81f7d428d07040b7d188d9f688127
For reasons that are still unclear, the 'ncbss' region was overlapping
the "audiobuffer" when linked with 2.21, but okay with 2.20.
Fixed it by making the audiobuffer explcitly use the current position
instead of relying on it being implicit.
With this change, portalplayer-based targets generate working binaries
when built with binutils 2.21 or newer.
This bug also theoretically affects imx233/imx31 targets as they
also have NOCACHE_BASE games in their linker scripts, but I lack
access to one to test with.
Change-Id: Idb38ab20f03599b9ed3d4bc0eafe519f38677438
User reported LCD screen corruption via forum in 3.14 and 3.15
turning backlight off and back on seems to fix the issue
http://forums.rockbox.org/index.php/topic,53192.0.html
Change-Id: Id0b34d2f9b77e79ab0ecabace331f0b203184724
The pp502x cache init code tries to flush the cache by reading
a block of DRAM. Change the starting point from 0x0 to 0x1000
so the compiler doesn't helpfully insert an undefined instruction
to deliberately crash the target.
(This behavior is intentional on the part of GCC, and was triggered
by using -Os with my experimental 4.9.4 toolchain)
Change-Id: I2d2719615a1164a035f3dac8a56dd3737bbab1d5
7442742 ("iPod Classic: disable IRAM1") was causing subsequent ipod6g
bootloader builds to result in a completely black screen upon
installation, with recovery only possible with a reflash through DFU
mode.
IRAM1 is re-enabled for bootloader only.
Change-Id: I92d489c91f81cad55d66a8647c1e61a45f468770
On Classic, IRAM1 (second 128Kb of a total of 256KB available IRAM) is
slower than DRAM. Codecs that actually are using regions of IRAM1 runs
faster when DRAM is used, so IRAM1 is disabled and only IRAM0 remains
enabled: 48KB for core and 80KB for codecs/plugins.
The next test_codec results shows how decode time is decreased:
file boosted unboosted
*.ra ~1.5% ~0.5%
*.mpc ~21% ~4.5%
*.ogg ~0.5% ~0%
nero_he*.m4a ~8% ~1%
nero*.m4a ~25% ~7%
wmapro*.wma ~4.5% ~0%
wma*.wma ~25% ~7%
In addition there is a small power save when IRAM1 HW is disabled.
Change-Id: I102adee11458e82037f23076d5d5956e23235de8
