Original commit credit to Amaury Pouly, Moshe Piekarski
Pushed across the finish line by Dana Conrad
To enable, see setting under General Settings --> System --> USB-DAC.
On devices with few endpoints, this may not work while HID and/or
mass storage is enabled.
Adds new dedicated mixer channel.
setting usb-dac can have values:
- never (0)
- always (1)
- while_charge_only (2)
- while_mass_storage (3)
Relevant devices are DWC2 and ARC usb controller devices. That being:
x1000 Native targets (m3k, erosqnative, q1, others...?),
sansac200, creativezenxfi2, vibe500, ipodmini2g,
ipod4g, creativezenxfi, creativezenxfi3, sansaview, ipodcolor,
creativezenxfistyle, samsungypz5, sansafuzeplus, iriverh10_5gb,
tatungtpj1022, gigabeats, faketarget, samsungyh820, gogearhdd1630, samsungyh925, ipodmini1g, ipodvideo, creativezenmozaic, sonynwze370, creativezen, gogearsa9200, gogearhdd6330, sonynwze360, sansae200, mrobe100, iriverh10, creativezenv, ipodnano1g, samsungyh920
USB Driver-wise, it should be noted that this patch requires some
slight changes:
- proper blocking on control OUT transfers, to make sure the data is
received *before* using it, the usb_core should probably use that too
- drivers can now support interface alternate settings
- drivers can be notified of completion by a new fast handler, which
is called directly from the driver; this is is necessary for
isochronous transfers because going through the usb queue is way too
slow
Designware changes:
- enable for USBOTG_DESIGNWARE
- set maxpacketsize to 1023 for ISO endpoints
Change-Id: I570871884a4e4820b4312b203b07701f06ecacc6
IMHO the current name is somewhat misleading:
- usb_drv_send() is blocking and we have usb_drv_send_nonblocking()
for the non-blocking case. This inconsistent naming can only
promote confusion. (And what would we call a blocking receive?)
- Other hardware abstraction APIs in Rockbox are usually blocking:
storage, LCD, backlight, audio... in other words, blocking is the
default expected behavior, with non-blocking calls being a rarity.
Change-Id: I05b41088d09eab582697674f4f06fdca0c8950af
This uses the new unicode string literal feature that is available
now to greatly simplify the initialization of these special string
types. This makes them much more readable at a quick glance.
Change-Id: Iad8b49aa763486608e3bb7e83fb8abfb48ce0a7b
FreeBSD apparently sends a SET_ADDRESS first, which confused our code.
This patch fixes that, and also simplifies the connection handling a bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31582 a1c6a512-1295-4272-9138-f99709370657
This needs support for usb interrupt transfers, so there are some changes in various USB drivers as well (only usb-drv-arc supports it at this point, others won't have working HID yet).
HID is disabled for now, as the apps/ part is not included yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20962 a1c6a512-1295-4272-9138-f99709370657
Still not enabled by default, #define USE_ROCKBOX_USB is still required to enable it.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16360 a1c6a512-1295-4272-9138-f99709370657
