Original commit credit to Amaury Pouly, Moshe Piekarski
Pushed across the finish line by Dana Conrad
To enable, see setting under General Settings --> System --> USB-DAC.
On devices with few endpoints, this may not work while HID and/or
mass storage is enabled.
Adds new dedicated mixer channel.
setting usb-dac can have values:
- never (0)
- always (1)
- while_charge_only (2)
- while_mass_storage (3)
Relevant devices are DWC2 and ARC usb controller devices. That being:
x1000 Native targets (m3k, erosqnative, q1, others...?),
sansac200, creativezenxfi2, vibe500, ipodmini2g,
ipod4g, creativezenxfi, creativezenxfi3, sansaview, ipodcolor,
creativezenxfistyle, samsungypz5, sansafuzeplus, iriverh10_5gb,
tatungtpj1022, gigabeats, faketarget, samsungyh820, gogearhdd1630, samsungyh925, ipodmini1g, ipodvideo, creativezenmozaic, sonynwze370, creativezen, gogearsa9200, gogearhdd6330, sonynwze360, sansae200, mrobe100, iriverh10, creativezenv, ipodnano1g, samsungyh920
USB Driver-wise, it should be noted that this patch requires some
slight changes:
- proper blocking on control OUT transfers, to make sure the data is
received *before* using it, the usb_core should probably use that too
- drivers can now support interface alternate settings
- drivers can be notified of completion by a new fast handler, which
is called directly from the driver; this is is necessary for
isochronous transfers because going through the usb queue is way too
slow
Designware changes:
- enable for USBOTG_DESIGNWARE
- set maxpacketsize to 1023 for ISO endpoints
Change-Id: I570871884a4e4820b4312b203b07701f06ecacc6
Based on g#844 and g#949, it is intended as a replacement for the
current s3c6400x USB driver.
The DesignWare USB OTG core is integrated into many SoC's, however
HW core version and capabilities (mainly DMA mode, Tx FIFO mode,
FIFO size and number of available IN/OUT endpoins) may differ:
CPU targets HW ver DMA NPTX FIFO FIFO sz #IN/OUT
-------- ------------- ------ --- --------- ------- -------
as3525v2 sansaclipplus 2.60a Yes Dedicated 0x535 4/4
sansaclipv2
sansaclipzip
sansafuzev2
s5l8701 ipodnano2g 2.20a Yes Shared 0x500 4/5
s5l8702 ipod6g 2.60a Yes Dedicated 0x820 7/7
ipodnano3g
s5l8720 ipodnano4g ? ? ? ? ?
Functionality supported by this driver:
- Device mode, compatible with USB 1.1/2.0 hosts.
- Shared FIFO (USB_DW_SHARED_FIFO) or dedicated FIFOs.
- No DMA (USB_DW_ARCH_SLAVE) or internal DMA mode.
- Concurrent transfers: control, bulk (usb_storage, usb_serial) and
interrupt (usb_hid).
Actually this driver is not used by any CPU, it will be enabled for
each individual CPU/target in next patches.
Change-Id: I74a1e836d18927a31f6977d71115fb442477dd5f
