CONFIG_RK27XX_FTL selects the FTL a target's NAND uses,
RK27XX_FTL_SCHEME_A or RK27XX_FTL_SCHEME_B. rk27generic and the YP-CP3
are Scheme A, the HM-60x Scheme B. ftl-rk27xx.c mounts the one named;
for Scheme B it maps the drives onto the volumes ID block 1 records:
the system disk from LBA 0, the user volume after the system data
area.
The other rk27xx targets with NAND - HM-801, MA8, MA8C, MA9, MA9C and
iHiFi 760, 770, 770C, 800, 960 - have no confirmed scheme. They drop
the NAND from storage and build only the FTL scheme finder, so users
can report what their device holds and the scheme can then be set.
Only Scheme A flushes at shutdown: Scheme B holds nothing in RAM.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Change-Id: I484217b82c6de7316b90b354c012bfbaa263b3dd
The standard load_firmware() function is used on targets which
use the "scramble -add" method for generating Rockbox binaries.
While it tries to be a bit more generic and allows the CRC/data
offsets to be placed anywhere in the file, there are no targets
which actually need this flexibility, because they are all using
plain old "scramble -add".
So we can actually simplify load_firmware() and remove defines
from the target headers. All the targets used CRC offset = 0 and
data offset = 8, except for a few which I assume never supported
ROLO or were never tested -- eg. samsungyh820: the CRC and data
offsets cannot both be 0.
The actual motivation for this is removing the calls to lseek(),
which can help make bootloaders a tiny bit smaller, as lseek is
typically not used anywhere else in bootloaders.
Change-Id: Ic2d01e5b75a32e88363f085e3e839146a0710bf4
Note: I left behind lcd_bitmap in features.txt, because removing it
would require considerable work in the manual and the translations.
Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
'swcodec' is now always set (and recording_swcodec for recording-capable
units) in feature.txt so the manual and language strings don't need to
all be fixed up.
Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
Except for unfinished or experimental ports, it isthe case that
USE_ROCKBOX_USB and HAVE_USBSTACK are both defined or both undefined.
Furthermore, it is a leftover of some early developments on the USB stack and
doesn't make sense anymore.
Change-Id: Ic87a865b6bb4c7c9a8d45d1f0bb0f2fb536b8cad
Reviewed-on: http://gerrit.rockbox.org/1091
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
DPI values are autogenerated from the resolution and collected display size
values. These values are inserted as comments as well.
Change-Id: Id03aedf9af18348f773dfce002805e480f6751e8
