Accomplish this by checksumming the english language input
and (1) including that in binary files and (2) checking the
value matches what was compiled into the firmware image
Not sure if this is the best approach but it works.
Change-Id: I8f79ad1b9d1cdf69e6a085d7b3dd1b5e078af04b
This allows fonts, backdrops, and wps/fms/sbs to be checked.
Note that while settings _names_ are validated, the _values_
can not always be checked. Detectable settings errors
are flagged, but are not considered fatal.
Change-Id: I2a2b7ad94462e983345a1e692eccd6bd57e90eb9
The YP-CP3 shares the YP-R0's keypad and so its plugin keymaps; with
the 400x240 screen handled every plugin builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Change-Id: I516ab057c081e710cbc1cf6eca2b24ee87231244
The contents of appextra are added to the INCLUDES list, eg:
appextra="recorder:hosted"
will result in this at compile time:
INCLUDES += -I$(APPDIR)/recorder -I$(APPDIR)/hosted
With that in mind,
* 'gui' and 'recorder' have been set for all targets other than
the original charcell Archos. Globally set these instead of
using them everywhere.
* 'hosted' was effectively a no-op and removed entirely.
* 'radio' was specified on a lot of targets that didn't have a radio,
just make it global as well.
The net result is that only the android targets now define 'appextra' in
their configure entry. A future patch will remove the need to specify
the ones that are now global.
Change-Id: I751284cde4785077c54405a8a10be819021e4255
It's not part of the build farm, doesn't have a manual, and isn't
even listed on the www site or wiki yet.
Change-Id: I5fc79d0316717898f16ff794cba114a46472ae8f
The YP-CP3's tuner is a Silicon Labs Si470x at I2C address 0x20, an
Si4703 by the RDS the original firmware enables. The firmware drives it
the Si470x way - writes from register 2, reads from 0x0A - starts its
oscillator with TEST1 = 0x8100 and a 500 ms wait before ENABLE, and has
no power or reset line for it.
- config: CONFIG_TUNER SI4700 with RDS, polled (no interrupt line
needed), and FM radio as an input source
- si4700.c: the YP-CP3 starts the oscillator as the Sansas do
- power-ypcp3.c: tuner power stubs - there is nothing to switch
- the rk27xx tuner I2C glue, and "radio" in the target's configure entry
- wm8751.c: audiohw_set_monitor() for a WM8750 target that plays the
radio but cannot record (rk27xx has no recording yet). The tuner, on
LINPUT1/RINPUT1, goes through the input PGA at +12 dB - as in the
original firmware - into the output mixers, the DAC staying in the mix.
The existing monitor routing lives in the recording code and switches
OUT2 off, which is the YP-CP3's headphone output.
Tested on a YP-CP3: stations tune and play at a sane level.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Change-Id: Ic097fc85dbd7fb71fcc28c97a9d378fa09599e79
Scaffolding for a port, starting from the rk27xx generic target: configure
entry 146 (target id 117, model number 132), config/samsungypcp3.h, and
firmware/target/arm/rk27xx/ypcp3/.
- LCD: the rk27xx LCD interface (lcdif-rk27xx.c) with this panel's init
sequence, from RE. See g#1050. Looks like SPFD5420A 18-bit bus,
400x240 landscape. It differs from the generic panel's sequence in the
gamma curve and in not writing VCOM_HV1.
- Backlight: PD4 / PWM0 with the generic board's timing, which the hwstub
work found to be the same.
- Storage: the microSD slot. Card detect is PC7, active low,
as on the generic board.
- Keys: the YP-R0's key set - five-way yog, Back, Menu, Rec/User, Power -
so the target uses SAMSUNG_YPR0_PAD and its keymaps. Eight keys sit on
two resistor ladders on the LSADC, found in the original firmware and
measured on a unit:
channel 1 up 158, down 295, select 435, left 561, right 687
channel 2 menu 155, back 292, user 431
each key owning half a step either side of its reading;
power is GPIO C1, active high.
Builds as firmware and as bootloader. Status 3 (unusable) in builds.pm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Change-Id: Iff4984023415f341ca7507af6b5b2b551201e953
A crash bug in those versions of texinfo (fixed in 7.20) caused the
glibc manual to fail to build. There is no build-time argument to
disable the manual, but there is a version check that gracefully
accomplishes the same thing.
So, add 7.0/7.1 in the glibc configure script blacklist.
Change-Id: If841aceeb7986db8274d145a5ea317278890eb30
When we request a thumb build on a non-thumb-only target, we hand
compilation to a script that tries to build everything as thumb, falling
back to non-thumb arm mode if the thumb build fails. In order for
this to work, the compiler flag -mthumb-interwork is required.
Move this definition out of the thumb-cc script, and into the configure
script (ie along with the other target-specific definitions)
Change-Id: Idc1f8caa088dbbf710b169b272de61cc0b7c9ca6
Pure file move, in preparation for a second Ingenic SoC.
dma, gpio, i2c, installer, kernel, nand and the SPL NAND backend
move from target/mips/ingenic_x1000/ to target/mips/ingenic/
Drivers that cannot move as whole files, because part of each is
genuinely X1000-specific, are left alone for now: msc, uart, sfc, the
debug menu and the OST helpers in system-x1000.c.
Verified as a no-op: built at target 246 --type=b before and after from
the same source path, bootloader.bin is byte-identical, and every moved
file's object has the same instruction stream under its new name.
Builds clean with no warnings for targets 246, 260 and 247, both
--type=n and --type=b.
Change-Id: I9f67c23384df49b8c4554d695b772bcd54a4e32f
Co-Authored-By: Claude Opus 5
This commit does the following changes to the 3ds port:
- Rename the target from ctru to 3ds.
- Rename all files and functions with the ctru naming convention to 3ds.
- Created a new file and folder structure that will better integrate future console ports that share the same codebase.
- Fixed a buffer overflow bug in pcm code.
Change-Id: I17c6f86df64eb99dd2b653485d70832ff46b2ba8
Rockbox Utility currently exposes SAPI5 voice speed but not the SAPI
voice volume. The encoder volume setting is applied after synthesis, so
it cannot prevent clipping or distortion already present in the
generated wave file.
This patch adds a Volume control to the SAPI5 TTS configuration. The
value is passed to the standard SpVoice.Volume property before
synthesis.
Change-Id: Ifa43e55f716f98150e94c86e5e6a6c8bce0ca852
Keep track of the type of skin file being parsed,
in case a tag needs this info.
E.g. %Lt should be ignored in any skin other than
SBS files.
Change-Id: Ib7e52c3e6810196cb566adb65619a1b847cf20ef
This means it will end up in nightlies, get voice builds, etc.
Next up is to add it to the themesite..
Change-Id: I78dc77addebceb49773adaa3b70e9a457585fe62
HibyOS-based target: keymaps, LED, powermgmt, bootloader and sim support,
plus cabbiev2 for the new 360x640x16 screen. Opus 5 helped w/ debugging
and the initial scaffolding.
Updated name to FB_STRIDE_MISMATCH, added simulator bmp and specs.
Change-Id: If797ac6581cf75d9d1fcf36e615ee03cf6f905d6
- makes SOURCE_DATE_EPOCH affect BUILDDATE and version string
- makes wpsbuild.pl output deterministic
- omits unnecessary extended metadata from zip files
- runs strip-nondeterminism on zip files if REPRODUCIBLE_ZIP is set
Change-Id: I1617e3f5233b2bc356fcfa6457be1a7785c303f9
This covers the rockbox binary (or bootloader), which increases the zip
file by 60-80k depending on the target.
It currently *excludes* codecs and plugins, which can add over 1MB to
the zip file. We can revisit this when/if we move to distributing 7zip
files instead.
Change-Id: Iec72dd3aa634ceca716975c13b7fa8707a485d30
The existing code treated any ready-read notification from cscript as
proof that synthesis had completed. The SAPI script can emit other
output, so the Utility could check for the wave file before the explicit
SYNC reply and report that the output file did not exist.
The script also used global "On Error Resume Next" without reporting
errors from SpFileStream.Open(), SpVoice.Speak(), or
SpFileStream.Close(). Several waits had no timeout, allowing the GUI
thread to remain blocked indefinitely.
The changes:
* reports SAPI COM errors to Rockbox Utility;
* verifies that SAPI actually created the requested wave file;
* waits for the explicit SYNC reply instead of any process output;
* applies finite timeouts to vendor queries, synthesis, and shutdown;
* terminates a stuck private cscript process safely;
* restarts cscript and retries the current string up to three times when a
third-party SAPI engine stops responding during a long generation run.
Change-Id: I2cf2aefb704353c648bef0c4312f35282ac4e25d
It is always enabled, except in the following situations:
* bootloaders
* warble or checkwps applications
* devices with less than 4MB of RAM
* imx233-based devices
imx233 is a special case; that will be backed out we figure out why
it fails to boot if the binary size exceeds 1MB.
Change-Id: If4a89e389f562bb5791a565fba99c830213473d3
The simulator on macOS has been broken since macOS 26.4
was introduced. On macOS 26.4, 26.5, and the 27 beta,
thread setup fails in make_context (firmware/asm/thread-
unix.c), because sigaltstack returns an "Operation not
permitted" error. Fall back to SDL threads until this
can be fixed.
Also update GCC to keep it in sync with the latest
Homebrew formula
(https://formulae.brew.sh/formula/gcc).
Change-Id: Ib08ac81ede00c577f28a85c7886f716e7504bbe9
When a font doesn't have a glpyh for a given codepoint, the convertor
points it at the "default glyph". The plan is to replace this pointer
with a canary value so that rockbox genuinely knows this glpyh
does not exist, allowing a fallback path to be implemented.
(The plan is for the fallback path to attempt to compose a glpyh from
its decomposed codepoints, but this would make it be possible to
implement a true fallback/subsitute font mechanism)
Change-Id: If6fea29f5393a6d4b9d5747c911a36fdc8dda5ae
Formerly fixed at the first glpyh in the converted font; now it can be
explicitly set. This mirrors the functionality available from using the
DEFAULT_CHAR property of BDF fonts
Change-Id: Ibd754faff3fd4d393c4781e8faa685612e3301f0
add a plugin_ram_end symbol to plugin.lds and rewrite ovl_offset.pl
to read plugin_ram_end and plugin_load_end_addr from the elf via nm.
this removes all dependence on the linker map file format, which
differs between gnu ld and lld.
Change-Id: I66e623d9a2b44eb84ae7035155c84d8afe46df23
which is required for u"" unicode string literals used in the USB stack.
gcc allows this even in gnu99, but clang does not.
Change-Id: I1700fe503f20f31ba4704f8bef1ccca45f822620
-fstack-protector only needs a small amount of runtime
support to work on native builds. It increases code size
by ~1.5% on ARM/MIPS; -fstack-protector-strong adds 3-4%.
This is disabled by default and must be enabled by passing
'--with-stack-protector' to configure.
Change-Id: If952e711d3673c9b469895f08c7bff70b3d95df6
