Basically use proper register names instead of magic values.
PP5002-based ipods (ie ipod1g-3g) use UART1 to drive the piezo vs
PWM of the newer models.
Change-Id: Ia333717a825ac6a0ebf43850fc31fca34178dd88
when battery_bench is run
exports a file in the rockbox directory called 'battery_levels.default'
if the user wants their own levels they can rename the file battery_levels.cfg
and it will be loaded at boot
some minimal error checking is performed prior to using the values
added manual entry
Change-Id: Ia0126faced0c7229fcf8385a1bcb584b5a9dc378
On these older iPods, power was not being shut down completely, which led to a backfeed situation leading to decreased battery life and some stability issues.
This was particuarly apparent when using SD card adapters that do not
respect the ATA power management commands (ie all of them), as they never enter a low-power state on their own.
With this change, there are reports of battery life exceeding 20 hours of continuous playback (~30% increase with CF cards, 3x improvement with SD cards) and appears to resolve intermittent wakeup stability issues with SD adapters.
Change-Id: I46cfff7a59bb18a448989812303f30869df24d2d
This allows to reuse a register definition across similar SoCs that have the same layout of registers (same offsets), but are using a different base address for the peripheral. The include guard was also fixed to reflect the new file name of the header.
Some registers were renamed in order to match the datasheet and for consistency with the other register numbering.
Change-Id: I0192e227a3c467504b8fcd1eb684a7fc861f7896
Due to its similarity with S5L8702, clickwheel support and sleep can be used as-is on S5L8720. DRAM and IRAM are also configured.
Change-Id: I52f8a3417e6a25c7360b1cae2fb5eed621e2e0db
The iPod 4g and color always ignored the very first
button press after booting, i.e. you needed to either
press another button or scroll for a bit first.
Not sure whether any other PP iPods exhibit the same
behavior, although it is not reproducible on an iPod
video.
This patch basically copies the code from FS#5230
that fixed unresponsive buttons whenever the HOLD
switch was turned off (committed as a5961c944b).
Change-Id: I8d3444094e5d000e0f8e30e39a23f054abeeb0f5
Only the primary contexts (standard, wps, quckscreen, tree, radio)
handle the new keys so far.
Todo contexts: Settings, keyboard, pitchscreen, bookmark, & recording.
Available docs for MODE4 don't list anything other than playback
controls, so it's not clear if there is a path forward here.
Change-Id: I91908092f75d96813e2e155e447129ba15f58051
Calling multiple levels of indirection in a loop slows things down
Really these need to be rewritten to take a start and end address
like most of the rest of the codebase
But this is safer without having test hardware in hand
Change-Id: Idae7b92ee779d020ed7fcc9334e2d5a9c710e64d
Fixes backlight not turning on after booting (tested on an iPod Mini 2G).
backlight_hw_init() copied from iPod 4G.
Change-Id: I9c32ca5ecd3dc74ea997e6cb843da79d303b0615
This is a quick patch to solve FS#13104, we can not disable the
clickwheel LDO from within interrupt code, so for the moment we
leave it enabled all the time, it is unknown how power comsumption
is affected when the hold switch is locked.
Change-Id: I8f675702e2b5becbcd9197c8b044e6b8daeea79f
Uses GPIO.E2 (Request To Send) to detect the holdswitch status,
it is a temporal workaround that seems to work on all models.
Holdswitch status must be detected to drive low GPIO.E2 (RTS)
and GPIO.E4 (Data Out) when the holdswitch is locked, otherwise
battery life decreases about 25%.
Holdswitch unlock action is detected by reading the HELLO message
that the external wheel controller sends when it is powered on,
this allows to quickly capture clickwheel activity after unlock.
GPIO.E2 is also used in case the HELLO message is missed because
the holdswitch was unlocked before Rockbox/bootloader starts.
These 2 lines (RTS and DOUT) can not be used to transmit messages
to the external clickwheel controller, not a problem, actually no
messages are sent while normal operation, only at initialization
stage.
Change-Id: I415fe54bfcbc2086d0f56d7affe6f789ce81a6db
This restores functionality that was broken in g#194 and committed as
revision 7ec426e497.
Bidirectional communication is required to ask the clickwheel controller
for the initial button state during boot. Otherwise our driver would only
know about pressed buttons when the first change event is received,
which is too late for e.g. prevention of USB connection during boot.
This fix is also required to support the selection of OF, Rockbox,
Disk Mode, etc. in the iPod Classic Rockbox bootloader.
Change-Id: I127d54cf9e630d8075dd6d66f95dacb2816bfbc8
Reviewed-on: http://gerrit.rockbox.org/938
Reviewed-by: Michael Sparmann <theseven@gmx.net>
Tested: Michael Sparmann <theseven@gmx.net>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
These nearly identical files are multiplying like rabbits as PP targets
are added and make SoC-related changes a PITA. Just include the master
.lds file from the target one as was done for bootloader USB.
Change-Id: I65e9e653030f0688b1728e32ada16abf2932e029
Configures GPIO ports to detect holdswitch status instead of
polling the PMU via I2C, this fixes some random crashes
Change-Id: I407c9ca4c2c9203842f9e774b1c8d0455d59048c
Reviewed-on: http://gerrit.rockbox.org/194
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Change all lcd drivers to using a pointer to the static framebuffer
instead of directly accessing the static array. This will let us
later do fun things like dynamic framebuffer sizes (RaaA) or
ability to use different buffers for different layers (dynamic
skin backdrops!)
Change-Id: I0a4d58a9d7b55e6c932131b929e5d4c9f9414b06
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
Vectors are needed by the CPU, but they don't need to be accessed by Rockbox.
Without the KEEP(), they can be removed when liking with --gc-sections,
creating a broken binary without any warnings. This tells the linker to not
remove them. It should enable use of --gc-sections for all targets. When not
using --gc-sections, this does not change the binary.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31351 a1c6a512-1295-4272-9138-f99709370657
Origional implementation by Robert Keevil with contributions from Frederik Vestre, Stoyan Stratev, Craig Elliott, Michael Sparmann, Thomas Schott, Rosso Maltese, and syncs from a bunch of other people!
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30995 a1c6a512-1295-4272-9138-f99709370657
Also set up a callback for the battery capacity setting (for all players) so changes take effect without having to reboot.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30170 a1c6a512-1295-4272-9138-f99709370657
