Added lcd inversion
Fix issue where backlight would turn on before first frame rendered
Fix issue where backlight would shortly appear at 100% before PWM is
ready during fade in
Turn off backlight before booting/RoLo/shutdown to avoid it being
enabled on next boot
Fix issue where fade in isn't smooth because brightness levels below 13 were
basically equalivent to off, by removing these brightness levels
Change-Id: I868eae2cbeea52c6af7d09c886958ff46167fe26
when battery_bench is run
exports a file in the rockbox directory called 'battery_levels.default'
if the user wants their own levels they can rename the file battery_levels.cfg
and it will be loaded at boot
some minimal error checking is performed prior to using the values
added manual entry
Change-Id: Ia0126faced0c7229fcf8385a1bcb584b5a9dc378
Calling multiple levels of indirection in a loop slows things down
Really these need to be rewritten to take a start and end address
like most of the rest of the codebase
But this is safer without having test hardware in hand
Change-Id: Idae7b92ee779d020ed7fcc9334e2d5a9c710e64d
For some reason those targets have quite imprecise button voltages and the
old margin was too small. This should fix the button-not-working issue,
especially when the player is very hot and cold.
Change-Id: I9fcddd7f079cd1c4ee121567fb21a4a0cbc0562b
Apparently the backlight driver is leaking current even when the PWM set to 0.
This patch should greatly improve the battery life of the device.
Change-Id: I76bbc8a87cae452e599b37de17e91f373cee58bc
Choices are limited for those: i2c is either generic software or imx233
hardware and power is either none or with a gpio. So factor ever possible
combination in a single common file and use fmradio-target.h to supply the
required parameters. This will remove a bunch of duplicate code.
Change-Id: If12faeb2e371631cd39cc18a4c1d859812007934
The old code allowed each target to specify its adc targets but this proved
useless since the target rely directly on imx233/lradc for input method and
generic adc is mostly used for battery and debug. Remove all target specific
files and provide a generic implemenation. The targets can still specify a
battery temperature channel in powermgmt-target.h
Change-Id: I68cf2e3e46379d174ac6d774ffb237bb15a19ae3
