Adds the platform file, modelled on the Nano 2G's and the iPod
Classic's, and corrects the supported-versions text shared by the Nano
manuals, which said Rockbox does not run on the third generation.
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Change-Id: Ie6290d67ae113086cb8a63c825eb9db9544c1d49
Add S5L8702 VPU-B initialization, reset, bitstream input, frame output,
and cache maintenance to the iPod 6G target. Advertise it with
HAVE_HW_H264 and append a capability-gated decoder interface to the
plugin API.
Keep MP4 parsing, AAC decode and mixer output, A/V synchronization,
playback controls, resume state, and presentation in the multi-file
h264_player plugin. The target layer exposes decoder operations only.
Accept non-fragmented MP4/M4V containing Constrained Baseline H.264
through level 3.0, up to 640x480 at 30 fps, with optional AAC-LC audio.
Validate codec configuration and all sample-table relationships before
activating the hardware.
Read MP4 tables in bulk, boost the CPU while preparing them, and report
staged loading progress so long movies do not appear to hang during
startup.
Register the viewer and document its format limits and controls. The
libm4a compatibility fixes needed by video-first containers remain in
the preceding standalone change.
Tested on an iPod Classic 6G through an isolated Rolo nightly runtime:
H.264/AAC playback and M4V startup succeeded. Normal and
isolated-runtime iPod 6G builds also complete, and git diff --check is
clean.
Change-Id: I1e96c65c7d0b4231a94f602f8052f1b26d6e4a80
Add Off, Auto, and On choices under the LCD settings menu for targets
with HAVE_COMPOSITE_VIDEO_OUT. Off is the default and leaves accessory
ADC, video registers, framebuffer conversion, output clocks, and CPU
boost untouched.
Auto enables output only for the qualified Philips dock signature. On
still requires a physically present, fully identified dock and permits
other detected composite accessories.
Document the menu behavior and the corresponding configuration-file
values in the iPod Classic manual.
Hardware tested on an iPod Classic 6G/7G with a Philips DCP750/37.
Change-Id: I649149daa331a95aa31110e1f2260a4a00ba789a
ipod:
- To be more consistent with other plugins and
(Settings) menus, press Long Select, instead of Menu,
to reset, and press Menu, or Select, to exit screen
fiiom3k:
- Press Back, or Select, to exit screen
- Press Menu, instead of Select, to switch between modes
- Use repeat button events and adjust values by 1%, instead of
by 0.1%, when scrolling, to speed up setting changes
- Get rid of surprising actions for Back/Menu/Volume buttons
Change-Id: Ifd16958bf56c7e20fb182aa157b4cb4dd19ac9b9
Cleaned up manual changes, and for some reason i forgot to add ACTION_WPS_ABRESET
mappings before so here it is, needed for the manual wps section.
Change-Id: If7ab8b146e84f91bb51a3ed03fb872ef3bab4d1f
Rework installation instructions, add blind users button
description, and generally clean up and make more readable.
Change-Id: I81fd4a7abf2ccc886cdc029afb73b1d0a71a35d1
prev/next -> PLA_LEFT/RIGHT
volup/dn -> PLA_UP/DN
scrollwheel -> PLA_SCROLL_*
This will fix bubbles and any other plugin that is explicitly expecting
PLA_SCROLL_* events.
Change-Id: I9fd4c2e6bdd13e147b20e0f0f600e7e0b9a82842
Long button presses to create a new file
were in conflict with button presses to
play/pause.
Pressing SELECT is now used to create a new file
(and start recording, if stopped),
pressing PLAY/PAUSE will start or pause recording.
Change-Id: If2e568b9b05500d73fd54b691262a64d1a0ff487
ToggleMode is remapped to BUTTON_SELECT
Reset is remapped to Long BUTTON_HOME or Long BUTTON_SELECT (avoids accidental reset by pressing BUTTON_SELECT)
Change-Id: I6fc4050c66db2d7db7ec899f9c83b70754fef9df
Recording works now, although I'm sure there will be a few
things that need fine-tuning. A major issue is that writing
to the SD card creates noticable interference, which happens
on the original firmware too but seems worse under Rockbox.
(Since Rockbox waits until RAM fills up before writing data,
the interference will only be heard on >50 MiB recordings.)
Change-Id: I5561dd9668c3bdd34e92f34ef50848aef8c0b7eb
- Enable repeat for prev/next keys
- Provide a way to access the context menu using buttons
- Update the manual
Change-Id: I53a7474cc64f915851175aea0695229c581fd8a6
It needs screenshots and slightly better installation instructions
Includes bits shared with other HibyOS platforms
Change-Id: I1c1974143b5badf1aca5c3281556ce553ab1b8a5
Includes installation instructions and a description of Rockbox's
limitations versus the original firmware. Some things are still
missing, notably screenshots for the Q1. The M3K image also needs
to be updated to include the 'select' button.
Change-Id: Ib533206df01925203edeccdd75e1bf22f407e794
Add bottom left as quickscreen and bottom right as hotkey acroos the
board for fuze+. Meant as a
stopgap until gesture support becomes good enough that it is unnecessary
Also adds my name to CREDITS
Change-Id: If1729b7d53d967081b6d97a9a49cd66312c96ed4
Original patch by Alexander Spyridakis
Modified by Steve Bavin and Igor Poretsky
Keymap fixes by Marianne Arnold
Change-Id: I5a252d97d2b05c533e048931f7354f4261f76499
3D "enhancement" is available on all imx233 platform, and also on platforms
with the WM8978 codec (gigabeats) and WM8750 codec (MPIO HD 200/300). I used
different texts for different codecs because (in theory) they do different
"things".
Change-Id: I62ecb075f7594427491b6be83cfa80f763566aba
The main "innovation" in this patch are two "virtual buttons"
for the record switch on YH92x targets. When the switch state
changes, a single BUTTON_REC_SW_ON or .._OFF button event will
be generated. Thus keymap code can react on switching, but
not on the actual state of the switch.
Wherever sensible, the following user scheme is applied:
- use PLAY as confirm button
- use REW button or Long REW to exit
- use REC (YH820) or FFWD (YH92X) as modifier key for button combos
Change-Id: Ic8d1db9cc6869daed8dda98990dfdf7f6fd5d5a1
New section Touchpad added to the manual. Gigabeatfx and
SansaFuze+ entries added for touchpad sensitivity setting.
Change-Id: I0c5a173d6ad479c4e6995cf5045d90da6cc216ab
Reviewed-on: http://gerrit.rockbox.org/689
Reviewed-by: Benjamin Brown <foolshperson@gmail.com>
Tested: Benjamin Brown <foolshperson@gmail.com>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
1) Now that recording is working a few keymaps update are required.
2) also implement the radio.c file so that fm dedicated keymaps
works.
3) implement some missing fm keymaps
4) manual updated accordingly
Change-Id: I40be3e245853ccb9ed7a5bc5a76fe4ed90772272
Reviewed-on: http://gerrit.rockbox.org/513
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Makes FM radio keys consistent with the updated Clip keymap in the rest of rockbox. Home now goes to the main menu, power stops the radio, and several other keys are a little more obvious.
Change-Id: Iaab207acf936820d5602ae1ce4ffbbe30bf7877e
- this patch add all general sections of the manual for the fuze+
- also correct some typos
Change-Id: Idd28675f48c0d01079d8fa01d68d3238ad2a54ce
Reviewed-on: http://gerrit.rockbox.org/116
Reviewed-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
Following a discution on irc we agreed on that:
- \ButtonPlayPause becomes \ButtonPlay for consistency
- It appeas in the manual as Play unstead of Play/Pause
- updated manual images accordingly
The patch was tested: manual still compile and display keymaps correctly
Change-Id: I04bd3c2bfee1c6c40ab66df9bf33f09f4ed47661
Reviewed-on: http://gerrit.rockbox.org/118
Reviewed-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
