when battery_bench is run
exports a file in the rockbox directory called 'battery_levels.default'
if the user wants their own levels they can rename the file battery_levels.cfg
and it will be loaded at boot
some minimal error checking is performed prior to using the values
added manual entry
Change-Id: Ia0126faced0c7229fcf8385a1bcb584b5a9dc378
Only affected status display, charging is handled entirely by hardware.
Introduced in f3026cd0 (2024-11-02)
Change-Id: I08c7c442fb3bddf18e5a0d33dac963c24d3c9182
The "charging" status is apparently "charging needed" as it
is asserted even when power is not being supplied. So first check
to see if USB is connected, and if so, then check the "charging" status.
Change-Id: I3050f187e0b6c9d97d25d80015b413cd02e5c3b2
Calling multiple levels of indirection in a loop slows things down
Really these need to be rewritten to take a start and end address
like most of the rest of the codebase
But this is safer without having test hardware in hand
Change-Id: Idae7b92ee779d020ed7fcc9334e2d5a9c710e64d
Fixes deficiencies with the button system on the X3
The x3 has an interesting button layout.
Multiple key presses are NOT supported unless
[BUTTON_POWER] is one of the combined keys
As you can imagine this causes problems as the power button takes
precedence in the button system and initiates a shutdown if the
key is held too long
instead of BUTTON_POWER use BUTTON_PWRALT in combination with other keys
IF using as a prerequsite button then BUTTON_POWER should be used
Multiple buttons are emulated by button_read_device but there are a few
caveats to be aware of:
Button Order Matters!
different keys have different priorities, higher priority keys 'overide'
the lower priority keys
VOLUP[7] VOLDN[6] PREV[5] NEXT[4] PLAY[3] OPTION[2] HOME[1]
There will be no true release or repeat events, the user can let off the
button pressed initially and it will still continue to appear to be
pressed as long as the second key is held
Tree scrolling is PLAY+NEXT or PLAY+PREV
Change-Id: I88dfee1c70a6a99659e8227f5becacc50cc43910
Group commands for a bit more speed
bitdelay was not being inlined
lower bitdelay to 12 cycles
Clean-up magic numbers
Change-Id: Ifeb57a5532807a598f1ec5e1c55f03e4aa1e133f
only check button values with adc when buttons are actually pressed
battery level check frequency is now around 30 seconds
switched to polling for the battery voltage w/ timeout
Ifdef functions Allow BACK OPTION PLAY to be the first of a two key combo
Change-Id: Icb48d62ac8d82b4dc931df5e1c5b4a84a9a69772
This allows targets to automatically switch audio settings when the
line out is plugged/unplugged.
Only hooked up on the xDuoo X3, but there are other potential users.
Change-Id: Ic46a329bc955cca2e2ad0335ca16295eab24ad59
Cleaned up, rebased, and forward-ported from the xvortex fork.
(original credit to vsoftster@gmail.com)
Change-Id: Ibcc023a0271ea81e901450a88317708c2683236d
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
