technically this isn't currently causing any issue but
coverity correctly identified the potential for buffer ovfl
Change-Id: I4af462c9860c44f22d05b5b2b4c685364823d395
mode only goes 0-4 the original commit mixed up the index and mode
bad stuff must happen but its been here for 16 years
Change-Id: I7e69f4e2574029a6bc3cea76e8803d2d0357d9e2
Annoyingly, this makes all of the '.S' files we compile get treated as
divided syntax, so we need to make the syntax in them explicit.
Change-Id: I56a3916b7b24c84a1214a5d6bc4ed4d651f002cf
Additionally, synchronize with the standard ATA driver's feature table
* Acoustic management set to quietest
* Set power mode to lowest w/o standby
Change-Id: I12e64354d4c946228e9a55fc8da2114127d08d28
...by checking to see if the mandatory ATA PM feature flag is set
The common CF->SD adapters don't report this.
TODO: When PM is not available, issue a CMD_FLUSH[_EXT] instead?
Change-Id: If9200bd3c03a984376203aeea4fbe11e230a9b4d
It is likely that these things accept data far faster than the spinning
rust drives ever would, and while there is a question about PIO timings,
DMA timings seem to be solid.
Change-Id: I70644e0ad85a6ed429c8704e66ca7af91d78765c
Max allowed size: 120860
Old thumb build: 128494
New thumb build: 118514 (fits!)
Disabled:
Logo;
alpha blending capabilities for bitmaps;
Arm stack unwinder (backtrace);
Related forum discussion: https://forums.rockbox.org/index.php/topic,54768.0.html
Fixes FS#12380
Change-Id: I978720d795cb0ef5169103e467cf8386c21d8e93
Instead of verifying the CRC before every access of the boot data,
verify the CRC once at startup and set a flag to indicate the boot
data is valid.
Also add a framework to support multiple boot protocol versions.
Firmware declares the maximum supported protocol version using a
version byte in the boot data header. The bootloader chooses the
highest version supported by it and the firmware when deciding
what boot protocol to use.
Change-Id: I810194625dc0833f026d2a23b8d64ed467fa6aca
Only the primary contexts (standard, wps, quckscreen, tree, radio)
handle the new keys so far.
Todo contexts: Settings, keyboard, pitchscreen, bookmark, & recording.
Available docs for MODE4 don't list anything other than playback
controls, so it's not clear if there is a path forward here.
Change-Id: I91908092f75d96813e2e155e447129ba15f58051
GCC 4.9 always emits assembly with divided syntax. Setting unified
syntax in inline assembly causes the assembler to complain about
GCC's generated code, because the directive extends past the scope
of the inline asm. Fix this by setting divided mode at the end of
the inline assembly block.
The assembler directives are hidden behind macros because later
versions of GCC won't need this workaround: they can be told to
use the unified syntax with -masm-syntax-unified.
Change-Id: Ic09e729e5bbb6fd44d08dac348daf6f55c75d7d8
It's usually only called from init() in main.c, so this is safe.
There is one more call in system-dm320.c from system_init(), but
that's also "safe". I don't know if it's okay to call i2c_init()
twice, but presumably it works...
Change-Id: I9c1cd918d162d9955f7cf03209e836cbd5e30c57
On single-core targets, system_init() is only called from init()
in main.c, which is also INIT_ATTR, so this is safe.
Multi-core targets additionally call system_init() from cop_main(),
which isn't marked INIT_ATTR. I'm fairly certain that it would be
safe to add INIT_ATTR to cop_main() with a bit of refactoring, but
I don't have a way of testing it. So for now, leave INIT_ATTR off
for multi-core targets.
Change-Id: I8fe4358f975880ca317d46bda01d7d9db529d3e3
Instead of putting "#ifdef LCD_STRIDEFORMAT" at every usage of the
macro it's simpler to have config.h define LCD_STRIDEFORMAT to the
default of horizontal stride when the target leaves it unspecified.
Change-Id: Ib187012aad65ac678dbd837b1464a83bad722411
Calling multiple levels of indirection in a loop slows things down
Really these need to be rewritten to take a start and end address
like most of the rest of the codebase
But this is safer without having test hardware in hand
Change-Id: Idae7b92ee779d020ed7fcc9334e2d5a9c710e64d
The implementation of write_bootdata() and get_redirect_dir() was
copied verbatim in two different places, obviously a bad thing for
maintainability. This moves them to a new file multiboot.c as they
are only used for multiboot.
Change-Id: Id0279216e4dd019f8bf612a81d3835eff010e506
This kind of reverts 7b596416bf ("Gigabeat S: Update RDS processing to
use asynchronous I2C rather than thread."). However, requiring RDS to
run in thread context will a) allow more upcoming features and b) remove
quite some complexity from the codebase (see the diffstat here) because
Gigabeat is the only user. iMX31 should be able to handle one more
thread, as it can even run Linux.
Change-Id: I46130034595ba66392c5417c275d036f4bd26943
Based on a patch by Amaury Pouly which was based on a patch from Ryan
Hitchman.
I mainly moved the code for polling into the tuner driver so it can be
reused by other targets. I added the CONFIG parameter for the polling
frequency (in ticks) to save energy. Also, I did some minor cleanups.
Change-Id: I95a62e7e1e42c62dbf47ecb27a3b312a42be62aa
IMHO the current name is somewhat misleading:
- usb_drv_send() is blocking and we have usb_drv_send_nonblocking()
for the non-blocking case. This inconsistent naming can only
promote confusion. (And what would we call a blocking receive?)
- Other hardware abstraction APIs in Rockbox are usually blocking:
storage, LCD, backlight, audio... in other words, blocking is the
default expected behavior, with non-blocking calls being a rarity.
Change-Id: I05b41088d09eab582697674f4f06fdca0c8950af
Fixes backlight not turning on after booting (tested on an iPod Mini 2G).
backlight_hw_init() copied from iPod 4G.
Change-Id: I9c32ca5ecd3dc74ea997e6cb843da79d303b0615
It has only a couple GB of onboard flash storage with no storage
driver in Rockbox. It hasn't seen any meaningful development since
its initial commit, it's not on the build farm, and the bootloader
build is broken by other refactoring.
Change-Id: Idd9e3c46fac9b96f416ce444182f97a50770e747
Atmel AT88SC6416C CryptoMemory is almost I2C compatible. The device
is connected to bitbanged I2C bus shared with compliant I2C devices.
Change-Id: Iec54702db1bdfb93c01291eef18ec60391c63b16
Do not introduce any change for M:Robe 500 as it uses the two LCD frames
in non-obvious way.
Sansa Connect and Creative ZVM use only single front framebuffer.
Place TTB at DRAM end to minimize memory loss due to alignment.
Reserve as little as possible memory for the LCD frames.
On Sansa Connect this change extends audio buffer by 858 KiB.
Change-Id: I21bdeec4cfba86d71803a39acd651a87e73767e6
Reducing number of fake RX buffers saves a bit more than 127 KiB RAM.
Fix compilation with CPPI logging enabled.
Change-Id: If1ad3a6fc251e284caaac78c2406a58f3d6547bb
AVR interrupt signal can remain active if the state has changed during
state read. In such case, there won't be intterupt and the interface
would appear unresponsive until AVR thread received event (e.g. USB
connection/disconnect). Solve the issue by not waiting for event if AVR
interrupt signal is active prior to event wait.
Change-Id: I86e388c7cd6da76e3abe7bf7114940f331e4c308
Make it possible for target to provide voltage, percentage and time to
empty values. The voltage measurement is nice to have in debug menu even
if the actions are taken only based on percentage. Perform battery level
estimation based on voltage only if percentage is not available.
Use time to empty based on actual power consumption. This makes the
estimated runtime displayed in Rockbox Info to react to backlight
setting. The bq27000 updates time to empty estimate every 5.12 seconds
so it is possible to see the estimate with backlight off on the screen
if user enters Rockbox Info, activates hold switch, waits 11 seconds and
releases the hold switch.
Change-Id: Iafe3fa0fb334e3428e3a0ad05b2c020d208dc934
Prevent startup screen flash by properly using AVR LCM functions. Power
off LCD when not needed to improve battery runtime.
Change-Id: I76e3c5c0208774f189fbc6f7d7b3c9e22c062285
Queue power off requests because power_off() can be called within tick
context that must not acquire mutex.
Change-Id: I6f1a8f81d15518876cd03556118fc9eb37b8175f
Import non-free firmware image from linux-firmware package.
Firmware loading works but is disabled at compile time because just
loading firmware without configuring device results in higher power
consumption without any benefit to end user.
Change-Id: I8fd252c49385ede1ea4e0f9b1e29adeb331ab8ae
Waiting 10 us between selecting slave and transmitting data on SPI
resolves spurious startup glitches.
Cache last read monotime value as it can differ from the first one.
Change-Id: Ia6ac5696f6ee2bc3c6a8be27e33aaddd9ff4ce2a
Read monotime twice in a row and only accept the value if it matches or
the two reads are 1 second apart.
Change-Id: Ibd289103a20404dd1b2bbd131fdfa8905852c788
AVR requires bigger delays between retries. Read state instead of
version for synchronization purposes as it shifts more bytes.
Change-Id: Ib7fa980496d3bc7744a086b45e1865861ef58b88
If the commands repeatedly fail it is likely that the AVR is not
programmed. In such case simply continue normal operation. This is
especially important in bootloader as it makes it possible to load new
rockbox build using bootloader USB mode. Otherwise, the only recovery
option would be to use I2C serial.
Change-Id: I4b0999833e9a906ec6353bdfdd5b68211f07ac81
Use 32-bit monotime AVR counter for time tracking. Set the time by
adding fixed offset to the counter value. Store the offset in rockbox
directory to make it persistent between reboots.
Do not implement alarm functionality as wakeup is only possible from
sleep and not from complete power off.
Change-Id: I615c7eb4df8ab0619dcbfcff107bc7051a15aace
