* Remove unused bits like the radio event and simplify basic
radio interface. It can be more self-contained with rds.h only
required by radio and tuner code.
* Add post-processing to text a-la Silicon Labs AN243. The chip's
error correction can only do so much; additional checks are highly
recommended. Simply testing for two identical messages in a row
is extremely effective and I've never seen corrupted text since
doing that, even with mediocre reception.
Groups segments must arrive in order, not randomly; logic change
only accepts them in order, starting at 0.
Time readout was made a bit better but really we'd need to use
verbose mode and ensure that no errors were seen during receiving
of time and more checks would be need to have a stable PI. The
text is the important bit anyway.
* Time out of stale text.
* Text is no longer updated until a complete group has been
received, as is specified in the standard. Perhaps go back to
scrolling text lines in the radio screen?
* Add proper character conversion to UTF-8. Only the default G0
table for the moment. The other two could be added in.
* Add variants "RDS_CFG_PROCESS" and "RDS_CFG_PUSH" to allow
the option for processed RDS data to be pushed to the driver and
still do proper post-processing (only text conversion for now for
the latter).
Change-Id: I4d83f8b2e89a209a5096d15ec266477318c66925
Somewhere along the line the screen stopped being cleared prior to
writing new text on each frame, which left visible bits of
previously-displayed text when it changed.
Change-Id: I344e03c234daa77f4e64ed89281c40db887e4498
Fix stuff that was bugging me about the way I did it at first.
While messing around I found RDS code wasn't masking its GPIO
ISR as it should, which might lead to two different interrupts
messing with the static data.
Change-Id: I54626809ea3039a842af0cc9e3e42853326c4193
Implement scanning as binary tree in array.
Make the ADC calls fewer without compromising read quality.
Declare the thread function as 'noreturn' to save some stack. Reduce
stack size (regardless, % use is now a bit lower).
Change-Id: I239792fd2a0a2c019d1ec4af1d6d4b466cdf0ef5
Split the ISR into two parts and alllow quick return from first half.
Introduces a uevent() API to have a callback happen in a specified
number of microseconds. Right now only one event is supported.
Change-Id: Ib1666165be2f6082e5275d64961f083cab104f9f
Apparently I got the "just-in-case" RXFIFO purge in there before the
RXFIFO was enabled, causing severe hardware spasms.
Change-Id: I2ea4b6d28e06372b61cb3f21ab2fce71dd408213
Remove the implementations of all exceptions handlers from the
various crt0.S files and have a single implementation in system-arm.h
The new implementation is weak so that it can be overwritten by some
specific code (like the unwinder)
Change-Id: Ib3e041ed6037376bbe0e79286057e1051640dd90
Reviewed-on: http://gerrit.rockbox.org/205
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
Additional status callback is added to pcm_play/rec_data instead of
using a special function to set it. Status includes DMA error
reporting to the status callback. Playback and recording callback
become more alike except playback uses "const void **addr" (because
the data should not be altered) and recording uses "void **addr".
"const" is put in place throughout where appropriate.
Most changes are fairly trivial. One that should be checked in
particular because it isn't so much is telechips, if anyone cares to
bother. PP5002 is not so trivial either but that tested as working.
Change-Id: I4928d69b3b3be7fb93e259f81635232df9bd1df2
Reviewed-on: http://gerrit.rockbox.org/166
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
FreeBSD apparently sends a SET_ADDRESS first, which confused our code.
This patch fixes that, and also simplifies the connection handling a bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31582 a1c6a512-1295-4272-9138-f99709370657
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
Enabled a PMIC event where it should be disabled. Used constant from wrong enum
to get sense bits (??) which messed up main charger detection.
Also remove an obsolete struct declaration.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31536 a1c6a512-1295-4272-9138-f99709370657
Dispense with "pmic" thread and process PMIC events directly within ISR. Add
sense bit reading as part of the handling.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31528 a1c6a512-1295-4272-9138-f99709370657
Synchronous cable read is still required because the timing of the receipt of
the cable event cannot be known for sure-- basically it introduced a thread
race between main and pmic. If a keypress is desired instead to enter BL USB
mode a la AS3525, then it's possible to remove that.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31510 a1c6a512-1295-4272-9138-f99709370657
Scheme is more flexible and should help to enable threadless RDS.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31461 a1c6a512-1295-4272-9138-f99709370657
Might as well rename spi_enable_module to spi_enable_node for consistency
as well so long as I'm being picky.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31442 a1c6a512-1295-4272-9138-f99709370657
Unify spi_enable/disable_module into one spi_enable_module call for API
consistency's sake with I2C driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31441 a1c6a512-1295-4272-9138-f99709370657
Nick some aspects from the as3525 ascodec driver to improve throughput in
the beast's SPI communications by switching tranfer descriptors to the
caller's stack and getting rid of thread synchronization.
Fix a bug that suddenly became obvious that could permanently stall the SPI
driver because all data could be shifted out before the interrupt could get
serviced. In that case, it needs a kick to restart it. Should probably put
the SPI interrupt priority above DVFS.
A tweak to the event registration interface to simplify it.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31353 a1c6a512-1295-4272-9138-f99709370657
Vectors are needed by the CPU, but they don't need to be accessed by Rockbox.
Without the KEEP(), they can be removed when liking with --gc-sections,
creating a broken binary without any warnings. This tells the linker to not
remove them. It should enable use of --gc-sections for all targets. When not
using --gc-sections, this does not change the binary.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31351 a1c6a512-1295-4272-9138-f99709370657
When a global pointer is not declared as constant, gcc will put it in
memory. Getting the address of the string it points to requires loading
the address of the pointer and then loading the pointer. When the pointer
is declared constant, the address of the string is loaded directly.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31345 a1c6a512-1295-4272-9138-f99709370657
* Add wildcards to various sections placements a la *(".text") => "*(.text*)"
* Remove hacky bits from those linker scripts (no problem encountered testing)
* Change section for asm functions from .<section> to .<section>.<function>
so that -ffunction-sections works for those asm file too.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31337 a1c6a512-1295-4272-9138-f99709370657
Massage the way it interfaces a bit to make things more flexible.
The chroma_buf scheme on Sansa Connect and Creative ZVx calling the
lcd_write_yuv420_lines implementation in lcd-as-memframe.S with five params
with a chroma buffer that the function can't use wouldn't work anyway so just
have them use the stock implementation (really, how was that working?).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31335 a1c6a512-1295-4272-9138-f99709370657
For this commit: Sansa e200v1, Gigabeat F, Gigabeat S and Mini2440 are
changed over. Quite a number of other targets probably can be as well.
General LCD code is moved out of the target drivers into
drivers/lcd-memframe.c.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31311 a1c6a512-1295-4272-9138-f99709370657
