Fills in the stubs the Nano 3G port was left with, taking each from how
the original firmware drives the same hardware.
Testing evidence: firmware/target/arm/s5l8702/ipodnano3g/TESTING.md.
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Change-Id: Iea5314769502f5941a176600869591756c5e3233
Add some hardcoded flick gestures in the list UI:
Top -> open quickscreen
Left -> go back
Right -> go to the WPS
The WPS also gets a set of hardcoded flick shortcuts:
Top -> open quickscreen
Left -> go to file / database browser
Right -> view playlist
Bottom -> context menu
These are enabled by default in pointing mode but can
be disabled using the "Touchscreen Flick Shortcuts"
option.
Change-Id: Ib30a338ebb9662cd136985da6d34ed5b041e4077
Add Off, Auto, and On choices under the LCD settings menu for targets
with HAVE_COMPOSITE_VIDEO_OUT. Off is the default and leaves accessory
ADC, video registers, framebuffer conversion, output clocks, and CPU
boost untouched.
Auto enables output only for the qualified Philips dock signature. On
still requires a physically present, fully identified dock and permits
other detected composite accessories.
Document the menu behavior and the corresponding configuration-file
values in the iPod Classic manual.
Hardware tested on an iPod Classic 6G/7G with a Philips DCP750/37.
Change-Id: I649149daa331a95aa31110e1f2260a4a00ba789a
Tune accel/decel/press coefficients and add a braking force which
kicks in when swiping in the opposite direction of scrolling. This
is instead of the usual acceleration force.
Change-Id: I2b220c98674933a6957d6982020406342cd019bd
Add configurable acceleration settings. There are 3 settings which
are applied at different times during scrolling. "accel" is used to
calculate the acceleration applied to the list based on the swipe
speed. "decel" determines the deceleration force applied based on
the list scroll speed, and "press" is an additional deceleration
force applied if you are pressing on the screen.
All settings have the general form:
kinetic scroll accel: <a0> <a1> <delay>
kinetic scroll decel: <a0> <a1> <delay>
kinetic scroll press: <a0> <a1> <delay>
where the formula for the acceleration is "accel = a0 + a1*vel" and
"vel" is the input velocity (swipe speed for accel, list scroll speed
for decel/press).
The delay parameter is a value in milliseconds which acts as a grace
period where the acceleration will *not* be applied. For example, if
you specify 250ms for decel, then deceleration will not kick in until
250ms after scrolling starts. For press, the delay is based on the
duration of the touchscreen press.
All settings have sane default values and don't need to be configured
to enable kinetic scrolling; it is always enabled. But the settings are
there for those who want to tweak the behavior.
Change-Id: I9723b496b2b5d3fb3643af60b169754fdba497f0
Allows any EQ band to be set to any of Low Shelf, Peak, or High Shelf, instead of hardcoding the types per band.
Change-Id: I470ab916359092ba465e7b6331baed3bf11b2fc9
Introduce the generic, target-agnostic pieces for a gadget-driven USB
Audio Class DAC, gated by the HAVE_HOST_USB_AUDIO target flag so they stay
inert unless a target opts in.
Rather than adding a new USB mode, reuse the existing usb_audio setting
(never / always / while charge-only / while mass-storage) with its
LANG_USB_DAC string, usb_set_audio() callback and the
PCM_MIXER_CHAN_USBAUDIO mixer channel. HAVE_HOST_USB_AUDIO becomes the
umbrella capability flag for this common code; USB_ENABLE_AUDIO stays the
native usbstack class-driver contract (which needs HAVE_USBSTACK and so
cannot be used by hosted ports whose kernel owns the USB controller).
usb_set_audio() is declared here and implemented by the target (natively
by the usbstack driver, or in the hosted port for gadget targets, as with
usb_audio_get_active()), and applied at settings load. The playback
interlock in wps.c/playback.c keeps local playback from mixing with host
audio while the DAC is active. Simulator stubs for usb_set_audio() and
usb_audio_get_active() keep sim builds linking.
Co-Authored-By: Claude Opus 4.8
Change-Id: I5b7738508c24721d91d4c32379102a1ac7c6228b
* Devices with ADB now have HAVE_USB_ADB
* DX50/DX90 no longer set USB_NONE
* stub out necessary functions
* usb_set_mode() and global_settings.usb_mode are now:
* called for all devices with (HAVE_USB_ADB | HAVE_USB_POWER)
* wrapped with consistent #ifdefs
Fixes regression in ce88de54b8
Change-Id: Ib0c16082fe237e8159cd42847355186ea5c74589
Allow setting context menu items
reuses WPS hotkey items
Runs the item
displays the item
Open plugin shows the item name
Pitch shows the pitch speed amount
add 'Show In Files' hotkey item
devices without a hotkey get an extra item
added Manual entries
Change-Id: I427e70e1cad15364ac5d2a7114032e97cc9eee1a
add 'Context Menu' item to WPS and Tree hotkeys
this allows a user to display a menu of hotkey actions to execute
when they press the hotkey
items are voiced
added 'View Album Art'
Change-Id: I2199c4de536f347016e7a8d7f3c063da0b56a9a0
The SYSTEM_STATUS macro for these variables has an
F_T_INT flag, which may result in an unexpected value
being written to the resume file for PLM and PVS.
Change-Id: Iea18efbdc68604e1297721d132a9a5b7d056ffad
I added the setting keep_directory which automatically updates
the last directory visited and restores it on next boot
--added manual entry
Change-Id: I0ffe6531d591d693806ce0bf56fe22b99e3315e9
Original author Melissa Autumn (https://codeberg.org/oopsallnaps/rockbox-hibyos) with contributions from Marc Aarts.
Adaptation to Rockbox standards by Marc Aarts
Change-Id: I09e5af7ba0a75c648e4b9fd424badc2d3665c943
For touch targets and right-handed use it makes most sense to
put the scrollbar on the right so your finger doesn't get in
the way of the touchscreen. Sorry left-handed people!
Change-Id: I35cfd8aa3bee6eb638572c9ca592942c53188a50
Original commit credit to Amaury Pouly, Moshe Piekarski
Pushed across the finish line by Dana Conrad
To enable, see setting under General Settings --> System --> USB-DAC.
On devices with few endpoints, this may not work while HID and/or
mass storage is enabled.
Adds new dedicated mixer channel.
setting usb-dac can have values:
- never (0)
- always (1)
- while_charge_only (2)
- while_mass_storage (3)
Relevant devices are DWC2 and ARC usb controller devices. That being:
x1000 Native targets (m3k, erosqnative, q1, others...?),
sansac200, creativezenxfi2, vibe500, ipodmini2g,
ipod4g, creativezenxfi, creativezenxfi3, sansaview, ipodcolor,
creativezenxfistyle, samsungypz5, sansafuzeplus, iriverh10_5gb,
tatungtpj1022, gigabeats, faketarget, samsungyh820, gogearhdd1630, samsungyh925, ipodmini1g, ipodvideo, creativezenmozaic, sonynwze370, creativezen, gogearsa9200, gogearhdd6330, sonynwze360, sansae200, mrobe100, iriverh10, creativezenv, ipodnano1g, samsungyh920
USB Driver-wise, it should be noted that this patch requires some
slight changes:
- proper blocking on control OUT transfers, to make sure the data is
received *before* using it, the usb_core should probably use that too
- drivers can now support interface alternate settings
- drivers can be notified of completion by a new fast handler, which
is called directly from the driver; this is is necessary for
isochronous transfers because going through the usb queue is way too
slow
Designware changes:
- enable for USBOTG_DESIGNWARE
- set maxpacketsize to 1023 for ISO endpoints
Change-Id: I570871884a4e4820b4312b203b07701f06ecacc6
Since even Shuffle and Repeat are now immediately applied
from the Quickscreen, I suppose it makes sense to do the
same for the album art setting as the remaining holdout.
Change-Id: Ib1b56c31f28d8197e001901296d9897a23134564
Allow independent sorting of playlists in the
playlist catalog, using the context menu.
You may want to usually sort playlists by their date
(modified), but sort audio tracks alphabetically.
This is now possible without having to constantly
adjust a setting.
The fact that 'Sort Files' applied to both the file
browser and playlist catalog seems more like a side
effect of the implementation, rather than behavior
that is wanted. Additionally, the 'By Type' sorting
makes no sense when only a single type is displayed.
Since many of the other File View settings don't
apply to the playlist catalog, hide the menu there.
Change-Id: Ic35038015d0860998ae117f472ce23ce3bc80cfa
When the Playlist Catalogue first appeared in the main menu
in 2011 (FS#11808), the 'Playlists' menu item was renamed
to 'Playlist Catalogue' which seems more verbose than is
necessary these days.
Since we don't have a 'Playlist Catalogue' menu item in the
onplay menu anymore, either, LANG_CATALOG can be eliminated.
Change-Id: I7f38b0847e9b982506371f4a4b473d1fb2551ad0
remove nvram and use the existing settings framework for it
add a crc check to the user_settings data to see if we need to save
the user setting file or if we can just save the status file (resume.cfg)
move volume to the system_status struct so we don't write the whole settings file
over volume changes
allow user to still export volume with save sound settings
allow the user to also export pitch and speed
name the file .resume.cfg
Rename all the SYSTEM_STATUS save file variables to TLAs to save space and
discourage tinkering
Cleanup DEBUG_AVAIL_SETTINGS output
when saving user_settings it calls status_save as well this cause the resume
file to be written twice. instead remove the callback for status_save
when setting_save is called
remove header text when saving .resume.cfg
convert status_save() to status_save(bool force)
add SYSTEM_STATUS_UPDATE_TICKS
for ATA device set this to 5 minutes
since we arlready wait for the disk to be up before saving
we don't want to miss our window
for all other every 15 minutes
that way if the battery is too low by the time shutdown comes around you
don't lose much progress
Change-Id: I27214ffd6e5d5494ee5ca83b14f04a41ba426ad7
Revisit this after discussion with chris_s on IRC and forum
Pitch menu now changes icon when pitch has been changed
uses NVRAM to save the pitch settings unconditionally
Manual updated
Change-Id: Idcb4c2b7fe42f7a203dc4bfc46285657f370d0fd
Unless you had manually resumed the playlist, you
didn't get any warning after Rockbox rebooted, when
replacing a modified current playlist.
Change-Id: Ibc83e3db4e6ee51e94204ac7732760894d2fb602
people don't like having to remember to run the TSR plugin so
lets meet them halfway
all tracks are added with timestamp, elapsed, length, trackname
added buffering for ATA devices
still needed:
-Done -- a plugin that parses for duplicates and reads the track info
to create the actual scrobbler log
(log can be truncated once dumped)
this should allow you to run the plugin at leisure
later I'd like to expand this logging to allow
track culling based on skipped songs..
remove the TSR plugin as hard disk no longer need to use it
Change-Id: Ib0b74b4c868fecb3e4941a8f4b9de7bd8728fe3e
Turns out they did not swap the stereo switch lines on us,
so this setting isn't really useful. Repurpose it to allow
the user to force the device into headphone or line output mode.
Note that settings other than "Automatic" will cause jack detection
to not work.
Default Automatic.
Change-Id: If94499fbb8f0d92111811fe51f6107ce213b66ad
cfg_vals aren't needed for most settings
F_TABLE_SETTING, F_CHOICE_SETTING, F_BOOL_SETTING
can use cfg_vals but only a few custom settings use it otherwise
for these settings we define F_HAS_CFGVALS and use the setting union instead (as these all use UNUSED)
noticed that settings_dumper missed most cfg values so didn't show text setting values
saves ~300 bytes
Change-Id: Ie504c8cfe2a6cf471117c3afe5cf9a770a7f1784
Offer new options to show elegantly your entries in any playlist/dynamic playlist viewer. This is especially important if you dual boot an iPod with Stock OS and want to sync with iTunes; with this very popular setup, file names are obfuscated which results in any Rockbox playlist viewer difficult to enjoy, and it was a long standing issue reported by several Rockbox users over the years. The only way to show the title was to open a contextual menu on each song to get infos about the selected song, which is a very long and anti-ergonomic process to understand what is on your current playlist/randomized playlist. The idea of this patch is to provide new alternatives that the user can select. I personally selected the Title & Album view which provides excellent readability.
This patch was built with performance in mind using lazy loading to load one by one the tags then cache a string and use the little cache as much as possible to make scrolling in the same area as smooth as possible. Performance remains very acceptable even on an iPod 4G with its original hard drive. Using a real compact flash with my iPod Mini 2G reduces the latency even more.
Those new options are disabled by default because they impact noticeably the scrolling performance and are less relevant if your files are decently properly named.
Unfortunately, the search feature in a playlist will need to continue to use the raw filename because reading the tags for a whole playlist is a performance disaster. This works decently while viewing just because I made a code that load those one by one as much as possible.
I focused also on testing that the opening of the playlist viewer UI remained fast, and loading one by one with lazy loading allows to get very little overhead in this regard.
Change-Id: I00d9c802e29f8372447813b035bbae207a016467
This improvement brings a huge performance improvement to start a random mix of your library. Previously, the only way to do this was to increase the size of a playlist with absurd sizes number. Now it will respect the limitation but will insert random songs from the current view.
Database: Add true random songs in playlist if it is gonna exceed its maximum capacity
More context is available here : https://www.reddit.com/r/rockbox/comments/1ez0mq4/i_developped_true_full_library_shuffle_for/
Also :
- Improved layout in the DB browser
- New default max playlists capacity is now 2000 on old PortalPlayer targets to give a better user experience and not having to wait dozens of seconds while creating a playlist
- "Show insert shuffled" option is now true by default
- Add a new shortcut to play all songs shuffled in the DB browser
- Now the feature is fully optional and enabled only on targets that have more than 2MB of RAM
- Add entries about this feature in the manual to explain it to the users
Change-Id: I1aebaf7ebcff2bf907080f1861027d530619097c
Change-Id: I3354923b148eeef1975171990e814a1a505d1df0
This option is especially useful for theme creators that want to create themes with lockscreens. When text is scrolling, it is breaking the lockscreen so setting this option to true prevent this. Text will continue to scroll normally in all other contexts.
Change-Id: I194f6837217881d50f567a775b81d0b422caf35c
