* Ingenic SD driver: cleanup DMA part a bit (not working yet)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21606 a1c6a512-1295-4272-9138-f99709370657
Replace most references to MMC/mmc with SD/sd
Remove MMC failover code since MMC cards aren't supported
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21604 a1c6a512-1295-4272-9138-f99709370657
ingenic SD driver needs more cleanup so it still doesn't use the common code
correct a comment in hotswap.c: card_extract_bits assume most significant word of register first (so, use this order)
fix debug menu which used MMC specific commands / bits positions in csd/cid
move the default block size of 512 into sd.h
move the mantissa & exponent table into a single file (sd.c) to reduce binsize. we don't need to export it anymore anyway
TODO : ingenic cleanup (will happen soon so building sd.c is not conditional)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21601 a1c6a512-1295-4272-9138-f99709370657
Put specific members under #ifdef (CONFIG_STORAGE & STORAGE_xx) (2 members for SD and 1 for MMC)
Fix a typo: tsac doesn't exist and must be read taac
Move card_get_info functions declaration inside hotswap.h to remove mutual inclusion of ata_mmc.h and hotswap.h
Move static const data structures from SD drivers into sd.h (sd_exponent and sd_mantissa)
Fix sd_command prototypes in SD drivers (card registers are unsigned long)
Fix speed calculation in Sansa AMS driver (PP SD driver needs to be checked)
Move ata-sd-target.h to sd-pp-target.h to reflect the PP specifity. Now it only contains declaration of microsd_int()
Remove unused ata-sd-target.h for injenic
TODO:
- check if CSD register bits are extracted correctly in PP driver
- correctly define read_timeout and write_timeout unit for MMC & SD, and use timeouts in Sansa AMS driver
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21586 a1c6a512-1295-4272-9138-f99709370657
The input to the ADC is now set to CVDD inside the while loop. If the input gets changed while waiting for the voltage to be read it will now be reset to CVDD before the next read is attempted.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21584 a1c6a512-1295-4272-9138-f99709370657
Lower CVDD core voltage to 1.10 volts when the frequency is less than 200 MHz.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21577 a1c6a512-1295-4272-9138-f99709370657
This was only used for data transfers, now use it also for card data
transfers in sd_select_bank, to save runtime alignement and stack usage.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21564 a1c6a512-1295-4272-9138-f99709370657
Note : SH has TIMER_FREQ defined to CPU_FREQ, so any code wanting it must include #config.h before #cpu.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21560 a1c6a512-1295-4272-9138-f99709370657
Put warnings in timer.h for incomplete targets (TIMER_FREQ not defined and/or timer-target.h inexistant)
Correct TIMER_STOP & TIMER_START macros arguments for target without timers
TIMER_START takes an extra argument in multicore builds (macro in macro doesn't work fine..)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21557 a1c6a512-1295-4272-9138-f99709370657
Add an argument int_prio to TIMER_START() macro because SH7034 needs it
Leaves a target specific code in timer_register (could be given to target code through timer_set and __timer_set() )
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21556 a1c6a512-1295-4272-9138-f99709370657
registering and unregistering are handled by the non target-specific functions of timer.c
Remove arguments from the new TIMER_START since they are unused by targets
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21553 a1c6a512-1295-4272-9138-f99709370657
Put the card data sent by DMA aligned on cache line size, and in uncached memory
Since sd_select_bank() is not used very often, still allocate the DMA buffer on the stack.
If you still experience any problems with this commit please report them after having formatted your player and reinstalled rockbox
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21550 a1c6a512-1295-4272-9138-f99709370657
- Indentation fix
- Put braces around _DEBUG_PRINTF macro
- read_cp15() is only 1 instruction so inline it, and it doesn't access memory
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21477 a1c6a512-1295-4272-9138-f99709370657
