Synchronous cable read is still required because the timing of the receipt of
the cable event cannot be known for sure-- basically it introduced a thread
race between main and pmic. If a keypress is desired instead to enter BL USB
mode a la AS3525, then it's possible to remove that.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31510 a1c6a512-1295-4272-9138-f99709370657
as3525v2 specific part is 400 LoC, ipod specific less than 300
(comments and whitespace included)
TODO: merge properly
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31509 a1c6a512-1295-4272-9138-f99709370657
Voltage can be read using as3543 adc (i.e. ascodec api, on this target implemented
via ioctl()). TODO: Look into possibly controlling charging more by re-using
powermgmt-ascodec.c. However, charging seems to be controlled by the kernel,
so may not be needed.
Charger state can be read using /dev/minivet. It allows to differentiate between
wall charger and usb charging, but that's not implemented (is it even worthwhile?)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31470 a1c6a512-1295-4272-9138-f99709370657
Scheme is more flexible and should help to enable threadless RDS.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31461 a1c6a512-1295-4272-9138-f99709370657
This commit changes the default HDD endianness to the correct one,
but stays compatible with the old endianness.
If an MBR with the wrong endianness is detected, it will
automatically enable word swapping and issue a warning splash.
To permanently fix this you'll need to upgrade emCORE to at least r836.
This will wipe all data! A post-r836 build of emCORE will be
officially released during the next couple of days.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31455 a1c6a512-1295-4272-9138-f99709370657
Might as well rename spi_enable_module to spi_enable_node for consistency
as well so long as I'm being picky.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31442 a1c6a512-1295-4272-9138-f99709370657
Unify spi_enable/disable_module into one spi_enable_module call for API
consistency's sake with I2C driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31441 a1c6a512-1295-4272-9138-f99709370657
DEBUG_GIO allows users to set any GIO options (direction, output state). As this feature should be used only by experienced users it is compiled conditionally.
Raise I2C delay values since udelay() is now precise and previous values seems to be too low for some devices.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31421 a1c6a512-1295-4272-9138-f99709370657
This port is a hybrid native/RaaA port. It runs on a embedded linux system,
but is the only application. It therefore can implement lots of stuff that
native targets also implement, while leveraging the underlying linux kernel.
The port is quite advanced. User interface, audio playback, plugins work
mostly fine. Missing is e.g. power mangement and USB (see SamsungYPR0 wiki page).
Included in utils/ypr0tools are scripts and programs required to generate
a patched firmware. The patched firmware has the rootfs modified to load
Rockbox. It includes a early/safe USB mode.
This port needs a new toolchain, one that includes glibc headers and libraries.
rockboxdev.sh can generate it, but e.g. codesourcey and distro packages may
also work.
Most of the initial effort is done by Lorenzo Miori and others (on ABI),
including reverse engineering and patching of the original firmware,
initial drivers, and more. Big thanks to you.
Flyspray: FS#12348
Author: Lorenzo Miori, myself
Merry christmas to ypr0 owners! :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31415 a1c6a512-1295-4272-9138-f99709370657
