* Increase audio buffer size to better handle IRQ latency (256->2048)
* Ensure DMA engine is idle prior to starting transfers
* Set AIC to repeat last sample in case of underflows
Change-Id: I9c45c20481ee072e5882b7586fb7d50bd8ef2f35
PLL1 clock for those frequencies has been dropped from 508 to 169.5 MHz,
so it's still a respectable reduction.
(I'm not sure how/why it ever worked with the XTAL source, but it did,
and was off by an audible amount)
Change-Id: I614d87e7dfdfe9210702b9c646d3863c06d6780b
* for <= 48KHz, BCLK must be 256*freq (ie bdiv = 4)
* for <= 96KHz, BCLK must be 128*freq (ie bdiv = 2)
* for 11/22/44/88 KHz, disable PLL1 and run off XTAL
* cut PLL1 with 12/24/48/98 KHz audio from 516->86MHz
* cut PLL1 with 8/16/32/64 KHz audio from 426->106.5MHz
This should result in significant power savings for
common 44.1KHz audio playback, and pretty good savings
for everything else.
As an added bonus:
* enable de-emphasis filters at 32, 44.1, and 48 KHz
Change-Id: Ie59067cd46c47e62abf4a32c53519efad104d6c8
This allows targets to automatically switch audio settings when the
line out is plugged/unplugged.
Only hooked up on the xDuoo X3, but there are other potential users.
Change-Id: Ic46a329bc955cca2e2ad0335ca16295eab24ad59
Cleaned up, rebased, and forward-ported from the xvortex fork.
(original credit to vsoftster@gmail.com)
Change-Id: Ibcc023a0271ea81e901450a88317708c2683236d
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
