- implement request_endpoint
- setup nextep chain for in endpoints
- remove useless dcache operation on IN transfer completion
- fix transfers to use correct max packet size
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28028 a1c6a512-1295-4272-9138-f99709370657
- use uncached address to access setup packet
- implement driver exit
- stop forcing full speed
- change fifo sizes on init
- don't call invalid_dache() on setup packet because it makes everything fail
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28027 a1c6a512-1295-4272-9138-f99709370657
FCLK is unused because we use fastbus clocking: CPU clock = PCLK
Base PCLK off PLLA and use the lowest frqeuency for FCLK (24MHz source,
maximum divider)
Save a bit of power, adjust Clipv1/e200v2/Fuzev1 current usage accordingly
Note: the power saving (in mA) is a bit less on e200v2/Fuzev1 than on Clipv1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28000 a1c6a512-1295-4272-9138-f99709370657
- change buffer alignement to 32 bytes (not sure if it's useful)
- flush rx fifo on reset
- use AS3525_PHYSICAL_ADDR for DMA
- reset endpoints structure states on reset
- force full speed for debugging purpose
- add more debugging code
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27986 a1c6a512-1295-4272-9138-f99709370657
Without this change the backlight would be enabled but the screen would
show the last content displayed before the screen went off
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27957 a1c6a512-1295-4272-9138-f99709370657
The driver is stable so we can use error codes for debugging
Fix 2 problems in error code path:
- release sd mutex
- release dma module when needed
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27915 a1c6a512-1295-4272-9138-f99709370657
fix DMA buffers when the src/dst is in IRAM
It worked fine because all the buffers are in DRAM, and the virtual
address happens to be the physical address
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27876 a1c6a512-1295-4272-9138-f99709370657
(USB stack is not used by default)
This makes debugging the USB driver easier
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27847 a1c6a512-1295-4272-9138-f99709370657
Users will have to reboot to OF manually or to power off, and then plug USB
No message is displayed because usb_detect() is run from a tick
This lacks documentation but should be OK for Unstable devices, and
will hopefully prevent clueless users from opening their devices and
breaking them definitely, instead of waiting for the battery to power
off.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27837 a1c6a512-1295-4272-9138-f99709370657
If the card is not actively deselected on newer Fuzev2, frequent
switches between internal storage and µSD will lock up.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27500 a1c6a512-1295-4272-9138-f99709370657
playing from µSD now works to some degree
database update or copy between the 2 drives lock up
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27496 a1c6a512-1295-4272-9138-f99709370657
fuzev2 button_read_device() runs in interrupt context so writes are atomic
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27494 a1c6a512-1295-4272-9138-f99709370657
- Revert BUTTON_HOME
- Modifications to SD driver (µSD not working yet)
TODO: µSD and FM radio
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27492 a1c6a512-1295-4272-9138-f99709370657
The new controller framebuffer (different from what is in clipv1/clipv2 and some clip+) has 128 columns, the old has 132 columns and is centered on the screen.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27257 a1c6a512-1295-4272-9138-f99709370657
There was a stupid bug in endpoint listing which caused random cancelling of EP0 transfers. The new scheme to handle EP0 transfers should avoid an unexpected setup packet which might cause a deadlock or confuse the core.
There is still an issue with the cancel_transfers function is still.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27178 a1c6a512-1295-4272-9138-f99709370657
