Remove direct calls to tuner_power(...) in apps/ and let
the driver manage tuner power with the RADIO_SLEEP setting.
Change-Id: I37cd0472e60db5d666dae1b9fe4755dd65c03edd
Reviewed-on: http://gerrit.rockbox.org/84
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Fixes swapped left and right channels on ipod 6g and changes the
i2s config to send samples as 16 bits instead of 16 zero padded to
24 bits to the dac.
Change-Id: Icfecfdf0f6868bdb01c11dced604ebfceb874aa1
Signed-off-by: Nils Wallménius <nils@rockbox.org>
GPIOA pin 1 used for USB DAC. This configures IO mux for using
GPIOA 0-4 pins instead of lcd data16-18,20,22, which are not needed,
because hifiman's lcd works in 16bit mode.
Change-Id: I47fe72abee56aebc56ef1c4c8a07a93698dcaa49
Simplified stack unwinder for ARM. This is port of
http://www.mcternan.me.uk/ArmStackUnwinding/
backtrace() is called from UIE() on native targets
and from panicf() on both native and ARM RaaA.
Change-Id: I8e4b3c02490dd60b30aa372fe842d193b8929ce0
The YPR0 has a fixed screen size. Letting the generic RaaA screen
size selection code work on causes checkwps/buildall.sh to build
broken checkwps binaries. There's no good reason to allow
overriding the screen size here
Change-Id: Ic666d28d10273000a8c1867580c8d1a13dd98dc9
/firmware is in the #include path with makes #include "asm/beep.c" sufficient.
Add a comment to generic beep code and make another express intent better.
Change-Id: I587cd704478b894785927bdfe2e647e28614df62
For now due to current lack of an apps/asm, place the ASM/generic code in the
firmware/asm directory.
Additionally, make generic beep code more generic.
Change-Id: I4a69b6ffcbb97d9e6dfde2209c5a118de19e5638
Only output logf() to the serial port if LOGF_SERIAL is defined
(in addition to HAVE_SERIAL). Add an option to advanced configure
to set this (defaults to off).
Change-Id: I13d0f5df391e5371f7797f46a3faaf7a6974b9e4
Reviewed-on: http://gerrit.rockbox.org/92
Reviewed-by: Björn Stenberg <bjorn@haxx.se>
Since smoothing was enabled for battery_status_update() in 109084d, the simulated charge/ discharge cycle was so fast that the battery level never really dropped much below 90%.
Change-Id: Ide5c7ceef97bc9ed62d45e3a0afd99ff6f0550ea
- PCM playback DMA doesn't need the discard. Only recording DMA would
need it.
- When creating threads for another core, the core creating the thread only
needs to commit. The discard on the other core is handled elsewhere.
Change-Id: I864a0777e22f221a66218efd2c02ff3ad3889736
The former gives 0-based indexes, which is what our implementation returns,
making the "- 1" unnecessary.
Change-Id: I172ab5e06695be62e4a18d4fd0415b8314f5dc26
The headphone volume register value reads differently in Line1 and DAC mode.
Since the volume is not set again when switching between playback and radio,
we need to remember the hp volume and reapply setting when changing the mode.
Change-Id: I8fbd344f78653c19d81a39dd3f680ec6885cb1ec
We neet to setup the XPD to work as GPIO
storage unaffected
Tested on working-already Clipv2 and on a 'brickable' clipv2
Change-Id: Idcbdfb6bd50d51b7f6f7e00b21df24fac9b3a6d8
Now lcd_framebuffer is the only framebuffer in the system. We still use a ARM-buffered buffer
which serve as an intermediate buffer for copying, to accomodate the requirement of the controller.
We implement lcd_update_rect() properly using this new scheme (this requires two little quirks),
this allows to implement lcd_blit_yuv with the right semantic (bypasses the framebuffer). YUV to RGB
conversion is still done in software but the DCP CSC should be able to do that but the hardware rotation
scheme is not the same as our software so it will require some tricks.
Change-Id: I0752e9c2f1a705d2e6a6010084e1f150965d8370
Ubuntu defines _FORTIFY_SOURCE=2, which causes glibc longjmp() to check sp
when gcc optimization is enabled. The check does not allow longjmp() to be
used for switching threads and results in a "longjmp causes uninitialized
stack frame" error. This disables the check.
Change-Id: Idb8877b43ce711df880ca88875ba5477445a577a
ata_removable() and ata_present() no longer exist (ATA drives are never
removable with our current drivers), so storage.c shouldn't try to call
them from the wrapper functions. This was never noticed because these
wrapper functions are only used for multidriver code, which happens not
to be used with ATA currently.
Change-Id: Icb5e8cb27cdbef3edc0e51c35dc40dadf4f9de29
Use two stage amplification (PGA gain and digital stage gain)
combined to extend recgain range to -17.25 +60.0dB.
Change-Id: I4df8af801730b7efb2d35096de077ba31d331222
Scrollstrip (as well as scrollwheel on ipods/sansas) works like
quadrature encoder. The states of input lines are tracked by the
gpio ISR and when the sequence is correct, appropriate button
event is pushed to the button queue directly. The downside of
this implementation is that scrollstrip doesn't emit _REL
events which has some weird consequences. For the scrollwheels
some hack have been crafted in action system to accomodate for
this. I don't like this approach. IMO the correct fix is to
properly emit _REL event when the user stops interacting with
the device or reverses the direction of the move. This patch
implements timeout which forces to emit _REL when expired.
Change-Id: I588ac5810dd2ab00c68935d23a62979cb1c2a912
Reading from /dev/r0Btn only allowed to read one button at a time. Reading GPIO
directly via ioctl() doesn't have this limitation.
This adds a more complete GPIO list also.
Change-Id: If47b0846472f0817305dbf930731255f875e0269
Author: Lorenzo Miori
