add needs_cpu_boost field to usb_class_driver and manage boost state in
usb_core, similar to needs_exclusive_storage.
Change-Id: Ieb0cd7bedda5b24bb0d209d5ce907db30f4815db
* pcm_play_data
* pcm_play_stop
* pcm_play_stop_int
* pcm_is_playing
* pcm_set_frequency
* pcm_get_frequency
* pcm_apply_settings
Now, the only user of these functions are the mixer and recording layers
that provide a higher-level API to plugins and the main [playback]
application.
Outside of the PCM core, pcm_apply_settings() was only used immediately
following a call to mixer_set_frequency(), so the latter function
now always calls the former.
Change-Id: I61c3144dc156b9de9b7963160b525c6d10c6ad4b
this commit has following changes:
- introduce `usb_drv_ep_spec` table to udc drivers, which represents
endpoint characteristics.
- introduce 'ep_allocs' table to class drivers, which represents what
endpoint type does the class driver want.
- implement endpoint matching logic to usb core.
this is a required step to implement usb config switching, because we
need to create config descriptors without actually initializing endpoints.
Change-Id: I11c324cd35189ab636744488f6259d0cdb2179f0
Needed due to us commandeering the AUDIO DSP "channel" for USBAudio.
If/When we add another DSP channel, this can be reverted.
Works, but still goes to a "blank" WPS screen for a split second before
cancelling out.
Change-Id: I5fb8a1e226b4d3e46c86c59d593d807f49d7a35f
Does not seem to affect UI usability, but allowable DSP loads will vary
based on device and playback sample rate.
To-Do (someday):
- Add dedicated DSP channel
- How to apply DSP settings to above new channel? (UI)
- How to lock out timestretch from being enabled?
Change-Id: Ia24d1055340354e2c32e6008e7e2b03a8e88867d
Add feedback not based on samples used, but on buffers filled - idea
being we can do "PID" (someone who has actually implemented Real PID
could probably rewrite the calculation) based on how many buffers
we have filled versus the ideal buffer filled level (16).
Feedback is based on a historical average of the last two feedback
intervals.
This feedback math is done as fixed-point math to keep floats out of core. Note that a couple division operations needed to be strategically staged to avoid overflow or truncation.
Floats are still used for debug screen printout.
Also fixed a typo in the definition of usb_audio_control_request()
Host:
Linux: works
MacOS: works
Windows: Feedback does not work! It appears that Windows may not
support asynchronous devices at all. Playback may "work",
but results will vary as the number of buffers filled will
drift over time.
Change-Id: I027feb16705e6e46c1144b1d08920b53de42cb26
Original commit credit to Amaury Pouly, Moshe Piekarski
Pushed across the finish line by Dana Conrad
To enable, see setting under General Settings --> System --> USB-DAC.
On devices with few endpoints, this may not work while HID and/or
mass storage is enabled.
Adds new dedicated mixer channel.
setting usb-dac can have values:
- never (0)
- always (1)
- while_charge_only (2)
- while_mass_storage (3)
Relevant devices are DWC2 and ARC usb controller devices. That being:
x1000 Native targets (m3k, erosqnative, q1, others...?),
sansac200, creativezenxfi2, vibe500, ipodmini2g,
ipod4g, creativezenxfi, creativezenxfi3, sansaview, ipodcolor,
creativezenxfistyle, samsungypz5, sansafuzeplus, iriverh10_5gb,
tatungtpj1022, gigabeats, faketarget, samsungyh820, gogearhdd1630, samsungyh925, ipodmini1g, ipodvideo, creativezenmozaic, sonynwze370, creativezen, gogearsa9200, gogearhdd6330, sonynwze360, sansae200, mrobe100, iriverh10, creativezenv, ipodnano1g, samsungyh920
USB Driver-wise, it should be noted that this patch requires some
slight changes:
- proper blocking on control OUT transfers, to make sure the data is
received *before* using it, the usb_core should probably use that too
- drivers can now support interface alternate settings
- drivers can be notified of completion by a new fast handler, which
is called directly from the driver; this is is necessary for
isochronous transfers because going through the usb queue is way too
slow
Designware changes:
- enable for USBOTG_DESIGNWARE
- set maxpacketsize to 1023 for ISO endpoints
Change-Id: I570871884a4e4820b4312b203b07701f06ecacc6
