tick_start, fmradio_i2c_init, pcm_init, pcm_postinit, pcm_play_dma_init
Also add some as3525 target specific functions
Make as3525v2 use this attribute
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26328 a1c6a512-1295-4272-9138-f99709370657
Even if we disable it in VIC_INT_EN_CLEAR, it still fires an interrupt
by running the default isr.
Locking requires disabling interrupts completely.
I'm not sure if DMAC is the only interrupt affected or if we can't rely
on VIC_INT_EN_CLEAR to mask interrupts.
If it's the latter, we will need to have special locking scheme for
INT_AUDIO.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26316 a1c6a512-1295-4272-9138-f99709370657
Declare VIC registers holding function pointers as volatile pointers to
function pointers and access them directly without casting
UIRQ() is an IRQ handler too, even if it doesn't return
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26313 a1c6a512-1295-4272-9138-f99709370657
- retry failed commands up to 6 times
- wait at most 5 seconds for the card to go to TRAN state
- wait for the card to be in TRAN state (i.e. not programming) before
disabling SD clocks (remove the workaround in sd_enable() )
should fix lockups reported on fuzev1 under heavy internal storage + µSD use
(playback + database/pictureflow updating)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26291 a1c6a512-1295-4272-9138-f99709370657
Selecting the right card before the transfer will deselect the other one
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26290 a1c6a512-1295-4272-9138-f99709370657
We assume only one bit is set and use clz to find the most significant
set bit, if there's more than one bit set we'll see it in the panic msg
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26285 a1c6a512-1295-4272-9138-f99709370657
A specific poweroff function needs to be used for wake-up to work
Disable RTC in bootloaders for consistency with other Sansas
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26243 a1c6a512-1295-4272-9138-f99709370657
Charge using 150mA current like the OF to charge faster
Edit clipv2 charging curve with 150mA
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26227 a1c6a512-1295-4272-9138-f99709370657
Move code not defined for bootloader under a single preprocessor check
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26219 a1c6a512-1295-4272-9138-f99709370657
GPIO direction needs only to be set at init
both functions are now one liners so make them static inline
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26218 a1c6a512-1295-4272-9138-f99709370657
- forgot a ccu undocumented thing in init
- finish init code (following linux patch)
- enable interrupts
- don't use dynanmic fifo sizing by default
- move to a more static configuration of usb hardware parameters (it might be necessary to move them to config* files later).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26195 a1c6a512-1295-4272-9138-f99709370657
we still need to convert uncached addresses to physical addresses
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26177 a1c6a512-1295-4272-9138-f99709370657
No need for special address handling, all addresses are equal to their physical address
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26176 a1c6a512-1295-4272-9138-f99709370657
it's only needed if we hotswap the µSD or if we build the fuzev2
scrollwheel code without irq (which we don't do anyway)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26165 a1c6a512-1295-4272-9138-f99709370657
test_disk doesn't freeze anymore when closing the file between writing & reading
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26164 a1c6a512-1295-4272-9138-f99709370657
The list is ordered by priority, put the DMA and SD interrupts at
the top
This seems to fix the random freezes on heavy storage operation like
building database or pictureflow cache
The recently added audio interrupt had a priority higher than SD slot on
as3525v1, give it a lower priority
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26160 a1c6a512-1295-4272-9138-f99709370657
Show all the adc channels in the IO ports debug menu (not for as3525v2
since the channels are different)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26149 a1c6a512-1295-4272-9138-f99709370657
build it on fuzev2 and clipv2 too, it should be the same controller
as3525v1 file is only build for CONFIG_USBOTG == USBOTG_AS3525, no need
to check for it in the .c file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26142 a1c6a512-1295-4272-9138-f99709370657
