* simplify some things (no functional changes)
* increase default and exploded ball size a bit to be more compliant with the original game (and make beating it on big screens a bit easier)
* whitespace cleanups
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23876 a1c6a512-1295-4272-9138-f99709370657
r23805 broke all manuals for Ipods with support for remote tuner. Add keymaps for the radio screen for those players.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23873 a1c6a512-1295-4272-9138-f99709370657
libspeex is split into libspeex and libspeexdsp. We need both, so check
for them the same time instead of trying to respect the fact that old
versions didn't have the libspeexdsp part. Should fix issues with
distributions that have libspeex and libspeexdsp split into separate
packages and only the libspeex one is installed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23872 a1c6a512-1295-4272-9138-f99709370657
It seems that lowering the operating frequency for the SD cards has made some uSD cards have problems with the init process.
By moving the boost from ident to operating frequency to after the switch to HS timing these card now seem to init normally.
We still need to fix the problem where the internal cards and non HS uSD cards are still slightly overclocked at 31 MHz.
As of now we experience data crc failures during writes at the next lower frequency of 15.5 MHz.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23870 a1c6a512-1295-4272-9138-f99709370657
The \centering macro needs a limited scope to work correctly. This means the centered part needs to get terminated by a break, otherwise centering doesn't work as expected. This seems to be an issue only with newer LaTeX distributions, i.e. older ones seem to misbehave here.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23865 a1c6a512-1295-4272-9138-f99709370657
- Standard context: make center and mid-right the same (long press to get to
context menu)
- WPS: Top/Bottom middle controls volume
- WPS: Long bottom-left for pitch screen
- WPS: Long bottom-right for ID3 screen
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23857 a1c6a512-1295-4272-9138-f99709370657
- ACTION_STD_CONTEXT was wrongly defined
- ACTION_STD_QUICKSCREEN is unreachable
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23856 a1c6a512-1295-4272-9138-f99709370657
Make quit button a shortcut to no in yes/no selection as it used to.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23844 a1c6a512-1295-4272-9138-f99709370657
This is within the SD Spec for v2 High Speed cards but still over the 25 MHz limit for v1 and non-HS v2 cards.
Test_disk write & verify passes on both internal and uSD.
The v1 cards still need to be lowered to 15 MHz but that causes data crc failures at this point.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23835 a1c6a512-1295-4272-9138-f99709370657
Currently the bypass bit is not cleared so it's possible to enter the identification phase at bypass speed instead of ident speed.
The simplest solution to ensure the bypass bit is not set is to set the register with an = operation instead of |=.
This makes setting the MCI_CLOCK register at the end of the controller init unnecessary.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23830 a1c6a512-1295-4272-9138-f99709370657
bits 13:0 must not be modified (except for bit 8 ?)
fixes FM on my Clipv1 (some Clips weren't affected)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23826 a1c6a512-1295-4272-9138-f99709370657
