* Create new 'sector_t' type alias:
* uint64_t for all targets with HAVE_LBA48 or HAVE_SDUC
* unsigned long for the everything else
* Alter all storage APIs to use sector_t instead of 'unsigned long'
* Alter Volume/Partition/storage info structures to use sector_t
* Disk cache converted to sector_t
* ATA Core:
* convert to using sector_t for sector addresses and drive sizes
* Always fill out upper 16 bits of LBA48 addresses
* IDENTIFY INFO is fixed at 512 bytes, not SECTOR_SIZE
* USB mass storage:
* convert to using sector_t for sector addesses and drive sizes
* Implement READ_16/WRITE_16 for LBA48 addresses
* Convert FAT code to use sector_t for all sector references
* output_dyn_value() now accepts int64_t instead of 'int'
* Corrected "rockbox info" to work for (MULTIVOLUME & !MULTIDRIVE)
* Better reporting of disk and (logical+physical) sector sizes in debug info
* Detect SDUC cards and report on storage debug_info screen
To-do: SDUC
* Refactor SD core to remove duplicate code in every driver
* Card probe and init state machine
* Implement core SDUC support
* SD2.0 needs to be 2.0+ (fixed for jz47xx and x1000)
* Host and Card ID (ACMD41)
* 32-bit addressing for all read/write/erase operations (CMD22)
* ADD SDUC to target device drivers, defining HAVE_SDUC as appropriate
Change-Id: Ib0138781a0081664d11511037685503df1b93608
* xDuoo X3 fix some warnings due to an incorrect #ifdef
* stub storage_removeable() and storage_present() for non-HOTSWAP builds
* sim_trigger_external() is gated by HOTSWAP, not MULTIDRIVE
Change-Id: I38f14fdfeba13957899c378051d49afc2e8245e5
* Query variable info _before_ mmaping the framebuffer
* Sanity-check the resolution/bitdepth, and if it doens't match
try to set it to what we want.
This is functionally a no-op.
Change-Id: I087ff81775d8f63bf7846b7fef19f6fc36c1cc84
* Distinct error codes for all failures
* Corrected some comments and error messages
The ypr0/r1 target should be switched over to the generic lcd-linuxfb
driver, but that will come later.
Change-Id: Idc3867a96db7e431847473708712f88dd2725a96
This reverts commit 0c737d3b2e.
Reason for revert: Not really a concern as open_stream returns an independent buffer since g#566
Change-Id: Idbd2f4a7cc2ea6362b7714629469eeb7b3d19b3b
leading slashes in directory components to path_append
makes a path with a leading slash absolute and discards
the basepath
Change-Id: I65253080c0ca4278b559894104ab25ab199a3100
sprintf, strcpy, memccpy can all just go thru path_append
with the added benefit of some path sanitizing too
Change-Id: I33510b56a364b8b3a0b06f2ff14b76491f6e3870
When the sd card is mounted into the root namespace the database
picks up files through both paths
previously we hid the mounted drive but this causes issues with users
databases when the drive letter changes
Adds a way to keep track of volumes mounted in the root namespace
Hides the enumerated volume in root
Database:
we can just parse the root directory ('/') and get to any mounted
volume but we can also enumerate a volume in the root directory
when this occurs it leads to multiple entries since the files can
be reached through multiple paths ex, /Foo could also be /SD1/Foo
Instead we will attempt to rewrite the root with any non-hidden volumes
failing that just leave the paths alone
Change-Id: I7bdba8cfaf63902d2a3852d28484bcf8ca317ebd
This was introduced by adding multivolume support to the hibyplayer units,
and might affect other things, if so a more general fix might be needed.
Change-Id: Ia9c1b6b1eb50e67221ce440d30d6770daaeac74e
Gate buflib_get_data() checking, debug printing, and buflib
integrity checks behind individual defines in buflib.h, and
turn them all off by default. If needed, they can be turned
on manually when compiling.
The buflib debug menu is only available if debug printing is
enabled, so after this commit it will no longer be included
in normal builds -- it isn't very useful to end users.
Change-Id: Iab25b7852bc7c5592ce04c9c45762046a87d5bc3
Instead of putting "#ifdef LCD_STRIDEFORMAT" at every usage of the
macro it's simpler to have config.h define LCD_STRIDEFORMAT to the
default of horizontal stride when the target leaves it unspecified.
Change-Id: Ib187012aad65ac678dbd837b1464a83bad722411
This looks like it was copy-pasted blindly from elsewhere and it
wouldn't even compile, since hosted RoLo is completely different
from native RoLo.
Change-Id: I4074f5323dcbdae85db8a04f222c858e9a228432
Give iBasso DX50/DX90 empty adc-target.h headers like all
the other hosted targets to avoid special cases.
Change-Id: Iaae15642fdec4ff18bc9ac01245753135128f676
Similar to the native port, the hosted port benefits from
adding a -1 dc bias to the PCM data. This prevents almost
all clicking artifacts.
Change-Id: Ic6378716774b6d88df23c476e2ef54d49f33dc72
According to backtrace(3) man page, the string returned from
backtrace_symbols() contains the return address so we shouldn't
need to print it ourselves.
Change-Id: Ia779207285c9ea0052b9aee3d84ee8380bf46d82
- Audio playback works
- Touchscreen and buttons work
- Bootloader works and is capable of dual boot
- Plugins are working
- Cabbiev2 theme has been ported
- Stable for general usage
Thanks to Marc Aarts for porting Cabbiev2 and plugin bitmaps.
There's a few minor known issues:
- Bootloader must be installed manually using 'usbboot' as there is
no support in jztool yet.
- Keymaps may be lacking, need further testing and feedback.
- Some plugins may not be fully adapted to the screen size and could
benefit from further tweaking.
- LCD shows abnormal effects under some circumstances: for example,
after viewing a mostly black screen an afterimage appears briefly
when going back to a brightly-lit screen. Sudden power-off without
proper shutdown of the backlight causes a "dissolving" effect.
- CW2015 battery reporting driver is buggy, and disabled for now.
Battery reporting is currently voltage-based using the AXP192.
Change-Id: I635e83f02a880192c5a82cb0861ad3a61c137c3a
It never worked, and hasn't compiled in something like a decade, Given
the HW capabilities (limited onboard flash, no expandability) there's
really no point in trying to fix/complete it.
Change-Id: I7d175089840396f8891645bd10010d730dd5bfdc
They were never finished, never saw any release ever, and haven't
compiled for the better part of a decade. Given their HW capabilities [1],
they are not worth trying to fix.
[1] 1-2MB RAM, ~256MB onboard flash, no expandability
Change-Id: I7b2a5806d687114c22156bb0458d4a10a9734190
Detection at startup is proving to be unreliable. Even if card is not
present at startup, upon insertion it will sort itself out properly.
Change-Id: I9ee90b724c90c530a39264f698c200a48aa72b1d
Including direct use of the external SD card mount
Known issue: If SD card is inserted at startup, it must be
ejected and reinserted to be registered.
Change-Id: I5f420160bda32135cbb088c1e8b04b6e3a73018e
