This reverts commit 573ba5472e.
Reason for revert: Accidentally pushed to master, Maintainer will be put in timeout.
Change-Id: Iaa5c6eb18ae40dd64c13db75c0c3f6f519922d4a
All toolchain dependencies are circa the GCC 9.5.0 release:
GCC 9.5.0, binutils 2.38, gmp 6.2.1, mpfr 4.1.1, mpc 1.2.1, isl 0.18
Native:
* arm - mini2g, nano2g seems to work
- ipod6g boot hang on 9.5.0 (possibly leading to disk corruption)
* mips - xduoox3 seems stable so far
* m68k - binaries untested
Hosted:
* arm - binaries untested
* mips - erosq seems stable so far
* Android NDK - unchanged at GCC 4.9.4
Change-Id: I614f1b198643bfa8c45f68e4d8e15307a4998618
Google changed their site and the layout of downloaded SDK zips.
Also add a warning to configure if a r2x series NDK version is used, because those aren't supported - they no longer contain GCC, only clang.
Change-Id: I48a42c38c9b657ac6662162a39763aac73ec502a
On MacOS, gcc is a symlink for clang.
Patch gets rid of the warnings produced by clang,
when it is set as HOSTCC, and fixes voicetools
compilation on MacOS when calling make voicetools
from the simulator directory.
lua rb_defines_helper:
format specifies type 'int' but the argument has
type 'long'
codecs: opus / speex (LOGF):
format '%ld' expects argument of type 'long int',
but argument 7 has type 'off_t'
gigabeat:
variable 'size' set but not used
rdf2binary:
a function declaration without a prototype is
deprecated in all versions of C
rbspeexdec:
passing 'unsigned char *' to parameter of type
'char *' converts between pointers to integer
types where one is of the unique plain 'char'
type and the other is not
hmac-sha1.c
defining a type within 'offsetof' is a Clang
extension
Change-Id: I90539906698868f9589650585d865aee9f7e8539
configure:
Ensure Werror option doesn't get lost when simcc resets GCCOPTS
uisimulator.make:
Remove ignored duplicate SIMLIB on Darwin
codecs.make:
Eliminate some redundancy
Change-Id: Ieee6f677fd22666cb58aa6fe53eabdc0b0f8c190
Comments are converted to UTF-8.
Strings which are part of executable code are converted using C-string hex literals. A comment with the intended UTF-8 character is appended to such lines.
The "c"-looking character in mpa.c was actually a small cyrillic "s" (i.e. "с").
Change-Id: If3a889080ef60b8bf756ad9ada38baede93ce35b
- Show a warning when Apple's clang is detected,
because compilation would fail with it. Then
check for a (e.g.) Homebrew-installed version
of GCC (14) and use it instead.
- Don't display multiple meaningless numbers when
(incorrectly) parsing Apple's current LD version
info. Set to 0 on Darwin, unless cross-compiling,
since it only matters in the latter case.
Change-Id: I52236e1d1c349e30850c7786736d820c25b6d2d8
Tested on MacOS Sequoia (Apple Silicon) with the
latest Xcode command line tools, gcc 14
(Homebrew GCC 14.2.0_1) and sdl2 (Homebrew 2.30.9)
Make sure 'gcc' (and 'gcc-ar') is in your PATH
ahead of the Xcode-provided "gcc"(clang). E.g.
by setting up symlinks in /usr/local/bin that
point to gcc-14 and gcc-ar-14.
Notes:
- The appropriate bmp from uisimulator/bitmaps
has to be manually copied to your build folder
and renamed to UI256.bmp, if you want the sim
background to be displayed
Change-Id: I559f33d2165065f913f30c016b85906af380fb81
When building on MacOS:
* greadlink instead of readlink
* gsed instead of sed
* $TMPDIR instead of a hardcoded /tmp
* apply a macos-specific patch
* additional option to GCC
Additionally, don't rely on the system 'isl' stuff; always have binutils
build its own.
The forum post also says that bumping mpfr 3.1.x to 4.1.x, and mpc
from 1.0.x to 1.2.x is needed, but I do not want to do that due to the
possibility of unknown codegen changes.
Change-Id: I18084d392fa927318cc2a1183da7eb2ffa0d5884
IMPORTANT: There is no guarantee this will compile cleanly much less
_work_ on any given target. This is purely to enable future hackery.
Change-Id: Ib58f21b717719fd4325622b446a60779406ae035
Support hw4 units with AXP2101 PMU
Bootloader successfully compiles and loads onto device.
The LCD appears to be identical to hw3 units.
Scroll wheel and buttons work
Audio output works, including volume.
HP/LO detect works
Rockbox build is generic
GPIO gating logic seems to be working as intended now.
- Added new GPIO definitions - some significant overlaps with pins
from previous hardware revisions...
- Added some GPIO definitions for older players we didn't know about
- Add register definitions for AXP2101 from datasheet
(these are very different from AXP192!)
- Add AXP2101 regulator definitions, need to support multiple step
sizes per regulator.
- Verify AXP2101 voltage set multi-range logic
- Verify AXP2101 voltage get multi-range logic
- Make AXP2101 its own driver
- AXP2101 driver should be "minimally viable", though I think
there is some extra functionality that could be implemented.
- Disabling the coulomb counter stuff - we could maybe make
the E-Gauge work for the same purpose, but it only appears to
be used on the debug screen at the moment so it doesn't seem
like it's worth the effort.
- Found new button GPIOs
- Found error in my GPIO setting logic, blue light works now!
- Set LDO/DCDC output voltages to OF's settings, as far as
I can tell.
- Determined we probably want TCS1421_CFG1:0 to be 0x00,
for UFP behavior
- Tested this rb build with both old and new bootloaders on hw1.5,
hw2, hw4 in as many configurations as I can think of, works across
the board.
- Bootloader can install itself on hw4, so nand chip isn't novel
- Uninstallation file can be made by patcher script, works on hw4
- Installation file can be made by patcher script, works on hw4
- Added HW4 to rbutil, manual
Change-Id: I5b75782273e81c2c6f2b9c79501c8b7cbf88391f
This uses the piper engine.
Peninsular Spanish sounds markedly different from Central/South American
Spanish, so it seems prudent to offer both.
...We'll see how the masses feel.
Change-Id: Idfd3edd92c2dde7f9288afd99f474e59984689c9
This uses Piper with a Peninsular Spanish voice.
I'd like to add Mexican Spanish as well, but then we'd have to use a
different TTS engine. Espeak is relatively crappy, and gtts relies on a
remote service.
Change-Id: I5099f5cc4db5cc037efb5a77c023d4da4c73e813
The 'struct font' definition says:
const void *offset; /* offsets into bitmap data,
uint16_t if bits_size < 0xFFDB else uint32_t*/
However convbdf was unconditionally using 'unsigned short' without
checking bits_size. This generated a bogus table if used with an
uncapped SYSFONT due to offeset overflows. And a pile of complier
warnings.
That said, we're still capping SYSFONT at 255 chars due to space
constraints -- 14-Rockbox-mix jumps from 2.6K to 1022K if left
uncapped. Yowza.
Change-Id: I4577da08ab1633ab7abbc167523196f38c8a348a
We moved to SDL2 but still had the SDL1 'sdl-config' executable
used in one place. Additionally, all comments and the help text
referenced the wrong executable name.
Change-Id: Ie2efa80d27be5f6391fc84e49e207aa2aac26e72
Now no matter how [de]normalized the input strings are, we will
normalize them to the best of our ability in what we use.
This adds a dependencey for Perl's Unicode::Normalize.
Change-Id: I13e275692ea33a463b19f3a499ea06ce1acbb44a
This should be a no-op for .lang files, but it can matter when
generating talk clips, as those are based on the raw filename.
Change-Id: Ia449ae7668818e4bf093347fd0fb15fa5b67fa69
This is particularly useful for classical music, where track names like
"symphony no.5" are common -- We want to voice this as "symphony number
5" instead.
Change-Id: I3607dfccbafee2174519760b30636e0db0aad819
GMP 4.3.2 was quite old even at the time of the GCC 4.9.4 release, and
it refuses to compile out of the box on modern toolchains (eg GCC 14)
due to issues in the configure script. Instead of trying to backport
fixes, just bump it up to 6.1.2, the final release in the 6.1.x series
that was current when GCC 4.9.4 was released.
Meanwhile, with the update to GMP, the also-quite-old MPFR 3.1.0 fails
to compile; instead bump it up to 3.1.6, which is the final release in
the 3.1.x series.
Change-Id: I356c07282b20629c90fb0de1b8be40d2c55bbefc
Since we can easily create our own install files for erosqnative,
modify script to create fresh install image from bootloader.erosq
or add bootloader to installation manifest of stock update file
to uninstall rockbox.
USAGE:
hibyos_nativepatcher.sh <mkrbinstall/mkstockuboot> [arguments depend on mode, see below]
hibyos_nativepatcher.sh mkrbinstall <OFVERNAME (erosq or eros_h2)>
<path/to/output> <path/to/bootloader.erosq> <HWVER (hw1hw2 or hw3)>
Output file will be path/to/output/erosqnative_RBVER-HWVER-OFVERNAME.upt.
Only the Hifiwalker H2 v1.3 uses "eros_h2", everything else uses "erosq".
hibyos_nativepatcher.sh mkstockuboot <path/to/OFupdatefile.upt>
Output file will be path/to/OFupdatefile-rbuninstall.upt.
Change-Id: I16bc6e43c42f99475ebdd5ec1ac1bae047129745
