imx233/fuze+: implement power management(battery charger), add powermgmt debug info, add power debug info, move target specific powermgmt code to its own files, remove auto-slow setup which was forgotten for debugging

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31424 a1c6a512-1295-4272-9138-f99709370657

firmware/target/arm/imx233/sansa-fuzeplus/powermgmt-target.h

@@ -0,0 +1,48 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2011 by Amaury Pouly
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#ifndef POWERMGMT_TARGET_H
+#define POWERMGMT_TARGET_H
+
+#include "config.h"
+#include "powermgmt-imx233.h"
+
+/* Fuze+ OF settings:
+ * - current ramp slope: 50 mA/s
+ * - conditioning threshold voltage: 3 V
+ * - conditioning max voltage: 3.1 V
+ * - conditioning current: 60 mA
+ * - conditioning timeout: 1 h
+ * - charging voltage: 4.2 V
+ * - charging current: 200 mA
+ * - charging threshold current: 30 mA
+ * - charging timeout: 4 h
+ * - top off period: 30 min
+ * - high die temperature: 71 °C
+ * - low die temperature: 56 °C
+ * - safe temperature current: 30 mA
+ */
+
+#define IMX233_CHARGE_CURRENT   200
+#define IMX233_STOP_CURRENT     30
+#define IMX233_TOPOFF_TIMEOUT   (30 * 60 * HZ)
+#define IMX233_CHARGING_TIMEOUT (4 * 3600 * HZ)
+
+#endif /*  POWERMGMT_TARGET_H */