Sansa clipzip: make main build compile (plugins still disabled)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30588 a1c6a512-1295-4272-9138-f99709370657

firmware/target/arm/as3525/sansa-clipzip/backlight-clipzip.c

@@ -19,15 +19,19 @@
  *
  ****************************************************************************/
 
+#include <stdbool.h>
+#include "config.h"
 #include "backlight-target.h"
 #include "lcd.h"
 #include "as3525v2.h"
 #include "ascodec-target.h"
 
-void _backlight_init()
+bool _backlight_init()
 {
     /* GPIO B1 controls backlight */
     GPIOB_DIR |= (1 << 1);
+    
+    return true;
 }
 
 void _backlight_on(void)

firmware/target/arm/as3525/sansa-clipzip/backlight-target.h

@@ -21,7 +21,7 @@
 #ifndef BACKLIGHT_TARGET_H
 #define BACKLIGHT_TARGET_H
 
-void _backlight_init(void);
+bool _backlight_init(void);
 void _backlight_on(void);
 void _backlight_off(void);
 

firmware/target/arm/as3525/sansa-clipzip/lcd-clipzip.c

@@ -401,3 +401,18 @@ void lcd_update(void)
     lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT);
 }
 
+void lcd_blit_yuv(unsigned char * const src[3],
+                  int src_x, int src_y, int stride,
+                  int x, int y, int width, int height)
+{
+    /* TODO */
+    (void)src;
+    (void)src_x;
+    (void)src_y;
+    (void)stride;
+    (void)x;
+    (void)y;
+    (void)width;
+    (void)height;
+}
+

firmware/target/arm/as3525/sansa-clipzip/powermgmt-clipzip.c

@@ -0,0 +1,50 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright © 2008 Rafaël Carré
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#include "config.h"
+
+/* The battery manufacturer's website shows discharge curves down to 3.0V,
+   so 'dangerous' and 'shutoff' levels of 3.4V and 3.3V should be safe.
+ */
+const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] =
+{
+    3400
+};
+
+const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] =
+{
+    3300
+};
+
+/* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */
+const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] =
+{
+    { 3300, 3653, 3701, 3735, 3768, 3790, 3833, 3900, 3966, 4056, 4140 }
+};
+
+#if CONFIG_CHARGING
+/* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */
+const unsigned short percent_to_volt_charge[11] =
+{
+    3427, 3786, 3842, 3877, 3896, 3924, 3971, 4028, 4084, 4161, 4190
+};
+#endif /* CONFIG_CHARGING */
+

firmware/target/arm/as3525/sd-as3525v2.c

@@ -378,6 +378,9 @@ static inline bool card_detect_target(void)
     return GPIOA_PIN(2);
 #elif defined(SANSA_CLIPPLUS)
     return !(GPIOA_PIN(2));
+#elif defined(SANSA_CLIPZIP)
+    /* TODO for ClipZip: determine polarity of uSD detect */
+    return false;
 #else
 #error "microSD pin not defined for your target"
 #endif