len0rd/rockbox
1
0
Fork 1
mirror of https://github.com/Rockbox/rockbox.git synced 2025-12-09 05:05:20 -05:00
Code Issues Projects Releases Packages Wiki Activity Actions

imx31: Fix a couple small problems with the i2c driver that went unnoticed until FM. Reset addr_count always and stop resetting module before STOP is actually generated. Simplify a tiny bit and remove inactive preprocessor block.

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19596 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Michael Sevakis 2008-12-26 16:06:40 +00:00
parent 859ee227ba
commit eaea11230a
1 changed files with 28 additions and 29 deletions
Download patch file Download diff file Expand all files Collapse all files

57
firmware/target/arm/imx31/gigabeat-s/i2c-imx31.c
View file

@ -85,7 +85,7 @@ static void i2c_interrupt(enum i2c_module_number i2c)
struct i2c_map * const base = desc->base;
uint16_t i2sr = base->i2sr;
base->i2sr = i2sr & ~I2C_I2SR_IIF; /* Clear IIF */
base->i2sr = 0; /* Clear IIF */
if (desc->addr_count >= 0)
{
@ -116,14 +116,17 @@ static void i2c_interrupt(enum i2c_module_number i2c)
if (base->i2cr & I2C_I2CR_MTX)
{
i2c_transmit:
/* Transmitting data */
if ((i2sr & I2C_I2SR_RXAK) == 0 && desc->data_count > 0)
if ((i2sr & I2C_I2SR_RXAK) == 0)
{
/* More bytes to send, got ACK from previous byte */
base->i2dr = *desc->data++;
desc->data_count--;
return;
i2c_transmit:
if (desc->data_count > 0)
{
/* More bytes to send, got ACK from previous byte */
base->i2dr = *desc->data++;
desc->data_count--;
return;
}
}
/* else done or no ACK received */
}
@ -184,6 +187,9 @@ static int i2c_transfer(struct i2c_node * const node,
int count = desc->data_count;
uint16_t i2cr;
/* Make sure bus is idle. */
while (base->i2sr & I2C_I2SR_IBB);
/* Set speed */
base->ifdr = node->ifdr;
@ -203,17 +209,24 @@ static int i2c_transfer(struct i2c_node * const node,
base->i2cr = i2cr;
/* Generate START */
base->i2cr |= I2C_I2CR_MSTA;
base->i2cr = i2cr | I2C_I2CR_MSTA;
/* Address slave (first byte sent) and begin session. */
base->i2dr = desc->addr;
/* Wait for transfer to complete */
count = (wakeup_wait(&desc->w, HZ) != OBJ_WAIT_SUCCEEDED) ?
-1 : (count - desc->data_count);
/* Disable module - generate STOP if timeout */
base->i2cr = 0;
if (wakeup_wait(&desc->w, HZ) == OBJ_WAIT_SUCCEEDED)
{
count -= desc->data_count;
}
else
{
/* Generate STOP if timeout */
base->i2cr &= ~(I2C_I2CR_MSTA | I2C_I2CR_IIEN);
count = -1;
}
desc->addr_count = 0;
return count;
}
@ -242,8 +255,6 @@ int i2c_read(struct i2c_node *node, int reg,
data_count = i2c_transfer(node, desc);
desc->addr_count = 0; /* To eliminate zeroing elsewhere */
mutex_unlock(&desc->m);
return data_count;
@ -281,20 +292,6 @@ void i2c_init(void)
desc->base->i2cr = 0;
imx31_clkctl_module_clock_gating(desc->cg, CGM_OFF);
}
#if 0
/* Pad config set up by OF bootloader doesn't agree with manual but
* TX works at the moment - probably would't do this here either */
uint32_t reg = SW_PAD_CTL_CSI_PIXCLK_I2C_CLK_I2C_DAT;
reg &= ~0xfffff;
reg |= (1 << 19) | (3 << 17) | (1 << 15) | (1 << 14) |
(1 << 13) | (0 << 11);
reg |= (1 << 9) | (3 << 7) | (1 << 5) | (1 << 4) |
(1 << 3) | (0 << 1);
SW_PAD_CTL_CSI_PIXCLK_I2C_CLK_I2C_DAT = reg;
#endif
}
void i2c_enable_node(struct i2c_node *node, bool enable)
@ -317,6 +314,8 @@ void i2c_enable_node(struct i2c_node *node, bool enable)
if (desc->enable > 0 && --desc->enable == 0)
{
/* Last enable */
while (desc->base->i2sr & I2C_I2SR_IBB); /* Wait for STOP */
desc->base->i2cr &= ~I2C_I2CR_IEN;
avic_disable_int(desc->ints);
imx31_clkctl_module_clock_gating(desc->cg, CGM_OFF);
}