mkamsboot: update README

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31380 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Rafaël Carré 2011-12-20 18:48:20 +00:00
parent 6a94f6b551
commit e4614c4208

View file

@ -25,6 +25,7 @@ Supported models
Sansa Clip : firmware version starting with "01." Sansa Clip : firmware version starting with "01."
Sansa Clip+ : firmware version starting with "01." Sansa Clip+ : firmware version starting with "01."
Sansa Clipv2: firmware version starting with "02." Sansa Clipv2: firmware version starting with "02."
Sansa ClipZip: firmware version starting with "01."
Sansa Fuze : firmware version starting with "01." Sansa Fuze : firmware version starting with "01."
Sansa Fuzev2: firmware version starting with "02." Sansa Fuzev2: firmware version starting with "02."
Sansa E200v2: firmware version starting with "03." Sansa E200v2: firmware version starting with "03."
@ -40,6 +41,7 @@ For the firmware upgrade to happen, the firmware has to be named specially:
clip v2 : m30pa.bin clip v2 : m30pa.bin
clip : m300a.bin clip : m300a.bin
clip+ : clppa.bin clip+ : clppa.bin
clip zip: clpza.bin
fuze : fuzea.bin fuze : fuzea.bin
fuzev2 : fuzpa.bin fuzev2 : fuzpa.bin
e200v2 : e200pa.bin e200v2 : e200pa.bin
@ -57,9 +59,7 @@ firmware and the new (rockbox) firmware.
To boot into the Original Firmware, you need to press the Left key. To boot into the Original Firmware, you need to press the Left key.
***Note : on the Clip+ you can alternatively press the Home key. ***Note : on the Clip+ you can alternatively press the Home key.
***Note : on the Clip Zip you can alternatively press the Vol- key.
The Fuzev2, Clipv2 and Clip+ will boot into the Original Firmware as well if it is powered up by
inserting an usb cable.
Hacking Hacking
------- -------