manual: Strip out a few more archos-specific chunks

Change-Id: If875fc86888491d8b26d9090ae3ae778dc32aa31

manual/appendix/config_file_options.tex

@@ -11,9 +11,7 @@
     \toprule
     \rowcolor{tblhdrbgcolor}\tblhdrstrut\textbf{Setting} & \textbf{Allowed Values} & \textbf{Unit}\\
     \midrule\localendhead % endhead breaks with htlatex
-    volume      & \opt{masd}{$-78$ to +18}%
+    volume      & \opt{iriverh100,iriverh300}{$-84$ to 0}%
-                  \opt{masf}{$-100$ to +12}%
-                  \opt{iriverh100,iriverh300}{$-84$ to 0}%
                   \opt{ipodnano}{$-72$ to +6}%
                   \opt{ipodvideo,cowond2}{$-89$ to +6}%
                   \opt{iaudiom3,iaudiom5,iaudiox5}{$-73$ to +6}%
@@ -21,16 +19,12 @@
                   \opt{e200,e200v2,ipodcolor,mrobe100,vibe500,ipodnano2g}{$-74$ to +6}%
                   \opt{samsungyh}{$-128$ to 0}%
                                         & dB\\
-    bass        & \opt{masd}{$-15$ to +15}%
+    bass        & \opt{iriverh100,iriverh300}{0 to +24}%
-                  \opt{masf}{$-12$ to +12}%
-                  \opt{iriverh100,iriverh300}{0 to +24}%
                   \opt{ipod,mrobe100}{$-6$ to +9}%
                   \opt{iaudiom3,iaudiom5,iaudiox5,e200,e200v2,vibe500,fuzeplus,%
                        samsungyh}{$-24$ to +24}%
                                         & dB\\
-    treble      & \opt{masd}{$-15$ to +15}%
+    treble      & \opt{iriverh100,iriverh300}{0 to +6}%
-                  \opt{masf}{$-12$ to +12}%
-                  \opt{iriverh100,iriverh300}{0 to +6}%
                   \opt{ipod,mrobe100}{$-6$ to +9}%
                   \opt{iaudiom3,iaudiom5,iaudiox5,e200,e200v2,vibe500,fuzeplus,%
                        samsungyh}{$-24$ to +24}%
@@ -250,18 +244,6 @@
       }
     }%
 
-    \opt{masf}{
-      loudness      & 0 to 17           & N/A\\
-      superbass     & on, off           & N/A\\
-      auto volume   & off, 20ms, 2s, 4s, 8s
-                                        & N/A\\
-      mdb enable    & on,off            & N/A\\
-      mdb strength  & 0 to 127          & dB\\
-      mdb harmonics & 0 to 100          & \%\\
-      mdb center    & 20 to 300         & Hz\\
-      mdb shape     & 50 to 300         & Hz\\
-    }%
-
     \opt{lcd_bitmap}{
       peak meter release
                     & 1 to 126          & ?\\

manual/appendix/file_formats.tex

@@ -62,20 +62,12 @@
   \includegraphics[width=0.37cm]{appendix/images/icon-rolo.png} 
   & Rockbox firmware & \fname{.mi4} & Load the new firmware with ROLO \tabularnewline
 }
-\opt{masd,masf}{
-  \includegraphics[width=0.37cm]{appendix/images/icon-audio-file.png} 
-  & Audio file & \fname{.mp2}, \fname{.mp3} & Start playing the file and show the WPS\tabularnewline
-}
 \opt{swcodec}{
  \includegraphics[width=0.37cm]{appendix/images/icon-movie-file.png}
  & Video & \fname{.mpg}, \fname{.mpeg}, \fname{.mpv}, \fname{.m2v} & Play the MPEG1/2 video \tabularnewline
 }
 \includegraphics[width=0.37cm]{appendix/images/icon-rock.png} 
   & Plugin & \fname{.rock} & Start the plugin\tabularnewline
-\opt{masf}{\opt{lcd_bitmap}{
-  \includegraphics[width=0.37cm]{appendix/images/icon-movie-file.png} 
-    & Rockbox Video & \fname{.rvf} & View the movie (Rockbox format)\tabularnewline}
-}
 \opt{sansaAMS}{
   \includegraphics[width=0.37cm]{appendix/images/icon-rolo.png} 
   & Rockbox firmware & \fname{.sansa} & Load the new firmware with ROLO \tabularnewline
@@ -83,10 +75,6 @@
 \includegraphics[width=0.37cm]{appendix/images/icon-text.png} 
   & Text File & \fname{.txt} & Display the text file using the text viewer plugin\tabularnewline
   & Voice file & \fname{.voice} & Allow Rockbox to speak menus\tabularnewline
-\opt{masf}{
-  \includegraphics[width=0.37cm]{appendix/images/icon-wav-file.png} 
-    & Wave Audio File & \fname{.wav} & Play the WAV file \tabularnewline%
-}
 \includegraphics[width=0.37cm]{appendix/images/icon-wps.png} 
   & While Playing Screen & \fname{.wps} & Load the new WPS display configuration\tabularnewline
 \end{rbtabular}

manual/configure_rockbox/playback_options.tex

@@ -68,11 +68,6 @@ you to configure settings related to audio playback.
     This can happen if the \dap{} is knocked, shaken or jogged heavily while
     Rockbox is trying to read the hard drive.
 
-    \opt{masd,masf}{
-      The anti-skip buffer can be set to a value between 0 and 7
-      seconds.\\
-    }
-
     \opt{swcodec}{
       The anti-skip buffer can be set to various values between
       5 seconds and 10 minutes.\\

manual/configure_rockbox/recording_settings.tex

@@ -6,29 +6,6 @@
       where you want to store them in the \setting{File Browser} and select
       \setting{Set As Recording Directory}.}
 
-\opt{masf}{
-  \section{Quality}
-    Choose the quality here (0 to 7). Default is 5, best quality is 7,
-    smallest file size is 0. This setting affects how much your sound
-    sample will be compressed. Higher quality settings result in larger
-    MP3 files.
-    
-    The quality setting is just a way of selecting an average bit rate,
-    or number of  bits per second, for a recording.  When  this setting
-    is lowered, recordings are compressed more (meaning worse sound quality),
-    and the average bitrate changes as follows.
-  
-  \begin{table}[h!]
-      \begin{rbtabular}{0.75\textwidth}{lX}%
-        {\emph{Frequency} & \emph{Bitrate} (Kbit/s) -- quality 0$\rightarrow$7}{}{}
-        44100~Hz stereo   & 75, 80, 90, 100, 120, 140, 160, 170 \\
-        22050~Hz stereo   & 39, 41, 45, 50,  60,  80,  110, 130 \\
-        44100~Hz mono     & 65, 68, 73, 80,  90,  105, 125, 140 \\
-        22050~Hz mono     & 35, 38, 40, 45,  50,  60,  75,  90 \\
-      \end{rbtabular}
-  \end{table}
-}
-
 \opt{swcodec}{
   \section{Format}
     Choose which format to save your recording in. The available choices are
@@ -49,8 +26,6 @@
         {44.1~kHz, 22.05~kHz and 11.025~kHz}
     \opt{iaudiom3,iaudiom5,iaudiox5,vibe500}
         {88.2~kHz, 44.1~kHz, 22.05~kHz and 11.025~kHz}
-    \opt{masf}
-        {48~kHz, 44.1~kHz, 32~kHz, 24~kHz, 22.05~kHz and 16~kHz}
     \opt{iriverh10}
         {96~kHz, 88.2~kHz, 48~kHz, 44.1~kHz, 32~kHz and 8~kHz}
     \opt{samsungyh}
@@ -67,12 +42,6 @@
     \opt{swcodec}{\note{The 11.025~kHz setting is not available when using %
       \setting{MPEG Layer~3} format.}
     }
-    \opt{masf}{
-      The frequency setting also determines which version of the MPEG standard
-      the sound is recorded using:\\
-      MPEG~1 for 48~kHz, 44.1~kHz and 32~kHz.\\
-      MPEG~2 for 24~kHz, 22.05~kHz and 16~kHz.\\
-    }
     \opt{recording_digital}
       {\note{You cannot change the sample rate for digital recordings.}
     }
@@ -117,13 +86,6 @@
     setting to configure how the mono signal is created. Options are L, R and L+R.
 }
 
-\opt{masf}{
-  \section{Independent Frames}
-    The independent frames option tells the \dap{} to encode with the bit
-    reservoir disabled, so the frames are independent of each other. This
-    makes a file easier to edit.
-}
-      
 \section{File Split Options}
   This sub menu contains options for file splitting, which can be used to split
   up long recordings into manageable pieces. The splits are seamless (frame

manual/configure_rockbox/sound_settings.tex

@@ -38,8 +38,6 @@ change to customise your listening experience.
   \nopt{iriverh100,iriverh300}{or suppresses}
   the lower (bass) frequencies in the sound. A value of 0~dB means that bass
   sounds are unaltered (flat response).
-  \opt{masd}{The minimum setting is -15~dB and the maximum is 15~dB.}%
-  \opt{masf}{The minimum setting is -12~dB and the maximum is 12~dB.}%
   \opt{iriverh100,iriverh300}{The minimum setting is 0~dB and the maximum is 24~dB.}%
   \opt{ipodnano,ipodnano2g,ipodcolor,mpiohd200}{%
       The minimum setting is -6~dB and the maximum is 9~dB.}%
@@ -66,8 +64,6 @@ change to customise your listening experience.
   \nopt{iriverh100,iriverh300}{or suppresses}
   the higher (treble) frequencies in the sound. A value of 0~dB means that
   treble sounds are unaltered (flat response).
-  \opt{masd}{The minimum setting is -15~dB and the maximum is 15~dB.}%
-  \opt{masf}{The minimum setting is -12~dB and the maximum is 12~dB.}%
   \opt{iriverh100,iriverh300}{The minimum setting is 0~dB and the maximum is 6~dB.}%
   \opt{ipodnano,ipodnano2g,ipodcolor,mpiohd200}{%
       The minimum setting is -6~dB and the maximum is 9~dB.}%
@@ -201,93 +197,6 @@ change to customise your listening experience.
   }%
 }
 
-\opt{masf}{
-  \section{Loudness}
-  When listening at low volumes, the ear will tend to make bass and treble
-  frequencies sound quieter than they really are. To compensate for this, 
-  \setting{Loudness} is an effect which emphasises bass and treble in a fashion
-  suited to the human ear. Frequencies in the vocal range are unaffected, since
-  the human ear picks these up very easily at any sound level.
-  It is of course also possible to use this effect at higher volumes for 
-  enhanced bass and treble.
-}
-  
-\opt{masf}{
-\section{Auto Volume}
-  Auto volume is a feature that automatically lowers the volume on loud parts,
-  and then slowly restores the volume to the previous level over a time
-  interval. This setting allows this time interval to be configured. Short
-  values like 20~ms are useful for ensuring a constant volume for in-car use and
-  other applications where background noise makes a constant loudness desirable.
-  A longer timeout means that the change in volume back to the previous level
-  will be smoother, so there will be fewer sharp changes in volume level.
-}
-
-\opt{masf}{
-\section{Super Bass}
-  This setting changes the threshold at which bass frequencies are affected by
-  the \setting{Loudness} setting, making the sound of drums and bass guitar
-  louder in comparison to the rest of the sound.  This setting only has an
-  effect if \setting{Loudness} is set to a value larger than 0~dB.
-}
-
-\opt{masf}{
-\section{MDB {}-- Micronas Dynamic Bass}
-  The rest of the parameters in this menu relate to the Micronas Dynamic
-  Bass (MDB) function. MDB is designed to enable the user to hear bass
-  notes that the headphones and/or speakers are not capable of reproducing.
-  Every tone has a fundamental frequency (the ``main tone'') and also several
-  harmonics, which are related to that tone. The human brain has a mechanism
-  whereby it can actually infer the presence of bass notes from the higher
-  harmonics that they would generate.
-
-  The practical upshot of this is that MDB produces a more authentic sounding
-  bass by tricking the brain into believing it is hearing tones that the 
-  headphones or speakers are not capable of reproducing.
-
-  The MDB parameters are as follows:
-  %
-  \begin{description}
-  \item[MDB enable.]
-    This turns the MDB feature on or off. For many users this will be the
-    only setting they need, since Rockbox picks sensible defaults for the
-    other parameters. MDB is turned off by default.
-  \item[MDB strength.]
-    How loud the harmonics generated by MDB will be.
-  \item[MDB Harmonics.]
-    The percentage of the low notes that is converted into harmonics.
-    If low notes are causing speaker distortion, this can be set to 100\%
-    to eliminate the fundamental completely and only produce harmonics in the
-    signal. If set to 0\% this is the same as turning the MDB feature off.
-  \item[MDB Centre Frequency.]
-    The cutoff frequency of your headphones or speakers. This is usually
-    given in the specification for the headphones/speakers.
-  \item[MDB shape.]
-    It is recommended that this parameter be set to 1.5 times the centre frequency.
-
-    This is the frequency up to which harmonics are generated. Some of the
-    lower fundamentals near the cut{}-off range will have their lower
-    harmonics cut, since they will be below the range of the speakers.
-    Fundamentals between the cut{}-off frequency and the lower frequency
-    will have their harmonics proportionally boosted to compensate and restore
-    the `loudness' of these notes.
-
-    For most users, the defaults should provide an improvement in sound
-    quality and can be safely left as they are. For reference, the defaults
-    Rockbox uses are:
-    %
-    \begin{table}[h!]
-       \begin{rbtabular}{0.5\textwidth}{Xc}{Setting & Value}{}{}
-          MDB Strength & 50~dB \\
-          MDB Harmonics & 48\% \\
-          MDB Centre Frequency & 60~Hz \\
-          MDB Shape & 90~Hz \\
-       \end{rbtabular}
-    \end{table}
-      
-  \end{description}
-}
-
 \opt{swcodec}{
 \section{Crossfeed}
   Crossfeed attempts to make the experience of listening to music on

manual/main_menu/fmradio.tex

@@ -30,10 +30,6 @@
       }
   }
 
-  \opt{masf}{\note{The radio will shorten battery life, because the
-      MAS-chip is set to record mode for instant recordings.}
-  }
-
       \begin{btnmap}
           \ActionFMPrev, \ActionFMNext
           \opt{HAVEREMOTEKEYMAP}{& \ActionRCFMPrev, \ActionRCFMNext}

manual/plugins/main.tex

@@ -175,11 +175,6 @@ option from the \setting{Context Menu} (see \reference{ref:Contextmenu}).}
     \opt{swcodec}{
         MP3 Encoder       & \fname{.wav}                     & x \\
     }
-    \opt{masf}{
-        \opt{lcd_bitmap}{
-            Movie Player  & \fname{.rvf}                     &   \\
-        }
-    }
     \opt{lcd_bitmap}{
         Rockboy       & \fname{.gb, .gbc}                &   \\
     }
@@ -188,9 +183,6 @@ option from the \setting{Context Menu} (see \reference{ref:Contextmenu}).}
     Sort                  & \fname{.*}                       & x \\
     Text Viewer           & \fname{.txt,.nfo, .*}            &   \\
     VBRfix                & \fname{.mp3}                     & x \\
-    \opt{masf}{
-        Wavplay           & \fname{.wav}                     &   \\
-    }
     ZXBox                 & \fname{.tap, .tax, .sna, .z80}   &   \\
   \end{rbtabular}
 \end{table}