len0rd/rockbox
1
0
Fork 1
mirror of https://github.com/Rockbox/rockbox.git synced 2025-11-09 13:12:37 -05:00
Code Issues Projects Releases Packages Wiki Activity Actions

fuzeplus: switch to new button driver

Browse source 
Change-Id: Ida1e5b4913131ec671b2d713743e26a28fca6a25
This commit is contained in:
Amaury Pouly 2014-02-22 20:36:52 +01:00
parent 4e3e3badcf
commit c6caf58407
1 changed files with 24 additions and 54 deletions
Download patch file Download diff file Expand all files Collapse all files

78
firmware/target/arm/imx233/sansa-fuzeplus/button-fuzeplus.c
View file

@ -27,10 +27,18 @@
#include "lcd.h"
#include "string.h"
#include "usb.h"
#include "power-imx233.h"
#include "button-imx233.h"
#include "touchpad.h"
#include "stdio.h"
struct imx233_button_map_t imx233_button_map[] =
{
IMX233_BUTTON(VOL_DOWN, GPIO(1, 30), "vol_down", INVERTED),
IMX233_BUTTON(POWER, PSWITCH(1), "power"),
IMX233_BUTTON(VOL_UP, PSWITCH(3), "vol_up"),
IMX233_BUTTON_(END, END(), "")
};
#ifndef BOOTLOADER
bool button_debug_screen(void)
@ -293,7 +301,7 @@ void touchpad_set_sensitivity(int level)
static void rmi_thread(void)
{
struct queue_event ev;
while(1)
{
/* make sure to timeout often enough for the activity timeout to take place */
@ -329,7 +337,7 @@ static void rmi_thread(void)
}
}
void button_init_device(void)
static void touchpad_init(void)
{
/* Synaptics TouchPad information:
* - product id: 1533
@ -349,18 +357,13 @@ void button_init_device(void)
* - Maximum X: 3009
* - Maxumum Y: 1974
* - Resolution: 82
*
* ATTENTION line: B0P27 asserted low
*
* The B0P26 line seems to be related to the touchpad
*/
/* touchpad power */
imx233_pinctrl_acquire(0, 26, "touchpad power");
imx233_pinctrl_set_function(0, 26, PINCTRL_FUNCTION_GPIO);
imx233_pinctrl_enable_gpio(0, 26, false);
imx233_pinctrl_set_drive(0, 26, PINCTRL_DRIVE_8mA);
rmi_init(0x40);
char product_id[RMI_PRODUCT_ID_LEN];
@ -369,7 +372,7 @@ void button_init_device(void)
* Since it doesn't to work great, just hardcode the sensitivity to
* some reasonable value for now. */
rmi_write_single(RMI_2D_SENSITIVITY_ADJ, 13);
rmi_write_single(RMI_2D_GESTURE_SETTINGS,
RMI_2D_GESTURE_PRESS_TIME_300MS |
RMI_2D_GESTURE_FLICK_DIST_4MM << RMI_2D_GESTURE_FLICK_DIST_BP |
@ -385,58 +388,25 @@ void button_init_device(void)
imx233_pinctrl_set_function(0, 27, PINCTRL_FUNCTION_GPIO);
imx233_pinctrl_enable_gpio(0, 27, false);
imx233_pinctrl_setup_irq(0, 27, true, true, false, &rmi_attn_cb, 0);
/* Volume down */
imx233_pinctrl_acquire(1, 30, "volume down");
imx233_pinctrl_set_function(1, 30, PINCTRL_FUNCTION_GPIO);
imx233_pinctrl_enable_gpio(1, 30, false);
}
#else
void button_init_device(void)
{
/* Volume down */
imx233_pinctrl_acquire(1, 30, "volume down");
imx233_pinctrl_set_function(1, 30, PINCTRL_FUNCTION_GPIO);
imx233_pinctrl_enable_gpio(1, 30, false);
}
int touchpad_read_device(void)
{
return 0;
}
#endif
void button_init_device(void)
{
#ifndef BOOTLOADER
touchpad_init();
#endif
/* generic */
imx233_button_init();
}
int button_read_device(void)
{
int res = 0;
if(!imx233_pinctrl_get_gpio(1, 30))
res |= BUTTON_VOL_DOWN;
/* The imx233 uses the voltage on the PSWITCH pin to detect power up/down
* events as well as recovery mode. Since the power button is the power button
* and the volume up button is recovery, it is not possible to know whether
* power button is down when volume up is down (except if there is another
* method but volume up and power don't seem to be wired to GPIO pins).
* As a probable consequence of that, it has been reported that pressing
* volume up sometimes return BUTTON_POWER instead of BUTTON_VOL_UP. The
* following volume_power_lock prevent BUTTON_POWER to happen if volume up
* has been send since a very short time. */
static int volume_power_lock = 0;
if(volume_power_lock > 0)
volume_power_lock--;
switch(BF_RD(POWER_STS, PSWITCH))
{
case 1:
if(volume_power_lock == 0)
res |= BUTTON_POWER;
break;
case 3:
res |= BUTTON_VOL_UP;
volume_power_lock = 5;
break;
default:
break;
}
return res | touchpad_filter(touchpad_read_device());
return imx233_button_read(touchpad_filter(touchpad_read_device()));
}