Move mkamsboot into the rbutil/mkamsboot/ directory - no other changes, so this should still work the same as before.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18706 a1c6a512-1295-4272-9138-f99709370657

rbutil/mkamsboot/Makefile

@@ -0,0 +1,56 @@
+# Change INFILE to point to your original firmware file
+INFILE=$(HOME)/FW/AMS/CLIP/m300a-1.1.17A.bin
+
+# OUTFILE is the file you copy to your device's root and rename to
+# (e.g.) m300a.bin
+OUTFILE=patched.bin
+
+# The uclpack command
+UCLPACK=../../tools/uclpack
+
+all: $(OUTFILE)
+
+mkamsboot: mkamsboot.c
+	gcc -o mkamsboot -W -Wall mkamsboot.c
+
+extract_fw: extract_fw.c
+	gcc -o extract_fw -W -Wall extract_fw.c
+
+# Rules for our test ARM application - assemble, link, then extract
+# the binary code
+
+test.o: test.S
+	arm-elf-as -o test.o test.S
+
+test.elf: test.o
+	arm-elf-ld -e 0 -Ttext=0 -o test.elf test.o
+
+test.bin: test.elf
+	arm-elf-objcopy -O binary test.elf test.bin
+
+# Rules for the ucl unpack function - this is inserted in the padding at 
+# the end of the original firmware block
+nrv2e_d8.o: nrv2e_d8.S
+	arm-elf-gcc -DPURE_THUMB -c -o nrv2e_d8.o nrv2e_d8.S
+
+# NOTE: this function has no absolute references, so the link address (-e)
+# is irrelevant.  We just link at address 0.
+nrv2e_d8.elf: nrv2e_d8.o
+	arm-elf-ld -e 0 -Ttext=0 -o nrv2e_d8.elf nrv2e_d8.o
+
+nrv2e_d8.bin: nrv2e_d8.elf
+	arm-elf-objcopy -O binary nrv2e_d8.elf nrv2e_d8.bin
+
+firmware_block.ucl: firmware_block.bin
+	$(UCLPACK) --best --2e firmware_block.bin firmware_block.ucl
+
+firmware_block.bin: $(INFILE) extract_fw
+	./extract_fw $(INFILE) firmware_block.bin
+
+$(OUTFILE): mkamsboot firmware_block.ucl test.bin nrv2e_d8.bin $(INFILE)
+	./mkamsboot $(INFILE) firmware_block.ucl test.bin nrv2e_d8.bin $(OUTFILE)
+
+clean:
+	rm -fr amsinfo mkamsboot test.o test.elf test.bin extract_fw \
+	nrv2e_d8.o nrv2e_d8.elf nrv2e_d8.bin firmware_block.bin \
+	firmware_block.ucl $(OUTFILE) *~ 

rbutil/mkamsboot/README

@@ -0,0 +1,10 @@
+mkamsboot
+---------
+
+A tool to inject some code (contained in test.S) into a firmware file.
+
+Edit the INFILE variable in the Makefile to point to the original
+firmware file you want to patch, edit "test.S" appropriately, and then
+type "make".
+
+

utils/AMS/hacking/Makefile

@@ -1,59 +1,7 @@
-# Change INFILE to point to your original firmware file
+all: amsinfo
-INFILE=$(HOME)/FW/AMS/CLIP/m300a-1.1.17A.bin
-
-# OUTFILE is the file you copy to your device's root and rename to
-# (e.g.) m300a.bin
-OUTFILE=patched.bin
-
-# The uclpack command
-UCLPACK=../../../tools/uclpack
-
-all: amsinfo $(OUTFILE)
 
 amsinfo: amsinfo.c
 	gcc -o amsinfo -W -Wall amsinfo.c
 
-mkamsboot: mkamsboot.c
-	gcc -o mkamsboot -W -Wall mkamsboot.c
-
-extract_fw: extract_fw.c
-	gcc -o extract_fw -W -Wall extract_fw.c
-
-# Rules for our test ARM application - assemble, link, then extract
-# the binary code
-
-test.o: test.S
-	arm-elf-as -o test.o test.S
-
-test.elf: test.o
-	arm-elf-ld -e 0 -Ttext=0 -o test.elf test.o
-
-test.bin: test.elf
-	arm-elf-objcopy -O binary test.elf test.bin
-
-# Rules for the ucl unpack function - this is inserted in the padding at 
-# the end of the original firmware block
-nrv2e_d8.o: nrv2e_d8.S
-	arm-elf-gcc -DPURE_THUMB -c -o nrv2e_d8.o nrv2e_d8.S
-
-# NOTE: this function has no absolute references, so the link address (-e)
-# is irrelevant.  We just link at address 0.
-nrv2e_d8.elf: nrv2e_d8.o
-	arm-elf-ld -e 0 -Ttext=0 -o nrv2e_d8.elf nrv2e_d8.o
-
-nrv2e_d8.bin: nrv2e_d8.elf
-	arm-elf-objcopy -O binary nrv2e_d8.elf nrv2e_d8.bin
-
-firmware_block.ucl: firmware_block.bin
-	$(UCLPACK) --best --2e firmware_block.bin firmware_block.ucl
-
-firmware_block.bin: $(INFILE) extract_fw
-	./extract_fw $(INFILE) firmware_block.bin
-
-$(OUTFILE): mkamsboot firmware_block.ucl test.bin nrv2e_d8.bin $(INFILE)
-	./mkamsboot $(INFILE) firmware_block.ucl test.bin nrv2e_d8.bin $(OUTFILE)
-
 clean:
-	rm -fr amsinfo mkamsboot test.o test.elf test.bin extract_fw \
+	rm -fr amsinfo
-	nrv2e_d8.o nrv2e_d8.elf nrv2e_d8.bin firmware_block.bin \
-	firmware_block.ucl $(OUTFILE) *~ 

utils/AMS/hacking/README

@@ -5,12 +5,3 @@ This directory contains the following tools related to the Sansa V2
 
 A tool that dumps information from an AMS firmware file.
 
-2) mkamsboot
-
-A tool to inject some code (contained in test.S) into a firmware file.
-
-Edit the INFILE variable in the Makefile to point to the original
-firmware file you want to patch, edit "test.S" appropriately, and then
-type "make".
-
-