Manual: A few more spelling corrections.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30273 a1c6a512-1295-4272-9138-f99709370657

manual/advanced_topics/archos-flashing.tex

@@ -45,7 +45,7 @@ outside, even if the flash ROM is completely erased.
 \nopt{ondio}{This won't work if you have one of the rare ``ROMless'' boxes. These
   have no boot ROM and boot directly from flash.
 }
-If the first $\approx$2~KB of the flash ROM are flashed ok, \emph{Minimon} can
+If the first $\approx$2~KB of the flash ROM are flashed OK, \emph{Minimon} can
 be used for the same purpose.
 
 \subsection{Terminology and Basic Operation}

manual/advanced_topics/main.tex

@@ -532,7 +532,7 @@ Example of a configuration file:
 
 \note{As you can see from the example, configuration files do not need to 
   contain all of the Rockbox options.  You can create configuration files 
-  that change only certain settings. So, for example, supppose you 
+  that change only certain settings. So, for example, suppose you 
   typically use the \dap{} at one volume in the car, and another when using 
   headphones. Further, suppose you like to use an inverse LCD when you are 
   in the car, and a regular LCD setting when you are using headphones. You 

manual/appendix/wps_tags.tex

@@ -201,7 +201,7 @@ or \config{\%D(2)}), produce the information for the next file to be played.
     \item `start' is the offset relative to the currently playing track for the
     playlist to display from (0 the current track, 1 is the next track, etc.).
     \item `code to render' is a line of skin code which will be displayed for
-    each line in the viewer. All text tags are supporte (including conditionals
+    each line in the viewer. All text tags are supported (including conditionals
     and sublines)
   \end{itemize}
 

manual/configure_rockbox/file_view.tex

@@ -27,7 +27,7 @@ displays files.
   It combines consecutive digits to a number used for sorting, taking leading
   zeros into account.
   \newline\setting{As digits} disables this algorithm, and causes every digit to
-  be compared separately. The following table demonstrates the two sortings.
+  be compared separately. The following table demonstrates the two sorting methods.
   \begin{table}
     \begin{rbtabular}{.8\textwidth}{XX}%
       {\textbf{As whole numbers} & \textbf{As digits}}{}{}

manual/configure_rockbox/recording_settings.tex

@@ -126,13 +126,13 @@
   2 -- 4 seconds.
   \begin{description}
     \item[Split Measure.]
-      This option controls wether to split the recording when the
+      This option controls whether to split the recording when the
       \setting{Split Filesize} is reached or when the
       \setting{Split Time} has elapsed.
 
     \item[What to do when Splitting.]
-      This controls what will happend when the splitting condition is
+      This controls what will happen when the splitting condition is
-      fullfilled the two available options here are
+      fulfilled the two available options here are
       \setting{Start a new file} or \setting{Stop recording}.
 
     \item[Split Time.]
@@ -220,7 +220,7 @@
     start threshold to start the recording. Depending on your situation you may
     want to set this setting to 0 (e.g. when copying a song from a commercial
     medium) or to quite big values. Because sound is not continuous by nature
-    (think of percussion) neglectable dropouts are tolerated during this start
+    (think of percussion) negligible dropouts are tolerated during this start
     duration.
     
   \item[Stop Below.]

manual/getting_started/installation.tex

@@ -438,7 +438,7 @@ straight to \reference{ref:finish_install}
 USB mode, you will see two visible partitions - the 150~MB firmware
 partition (containing at least a file called \fname{nk.bin}) and
 the main data partition. Rockbox \emph{must} be installed onto the main
-data partiton.}}
+data partition.}}
 
 \begin{enumerate} 
 \item Download your chosen version of Rockbox from the links in the
@@ -543,7 +543,7 @@ structure that Rockbox needs.\\}
   \item Safely eject / unmount your \dap{}.
   
   \item \warn{Before proceeding further, make sure that your player has a full charge
-  or that it is connected to the power adaptor. Interrupting the next step
+  or that it is connected to the power adapter. Interrupting the next step
   due to a power failure most likely will brick your \dap{}.}
   Update your \daps{} firmware with the patched bootloader. To do this, turn
   the jukebox on. Press and hold the \ButtonSelect{} button to enter the main menu,
@@ -560,7 +560,7 @@ structure that Rockbox needs.\\}
   \item Safely eject /unmount your \dap{}.
 
   \item \warn{Before proceeding further, make sure that your player has a full charge
-  or that it is connected to the power adaptor. Interrupting the next step
+  or that it is connected to the power adapter. Interrupting the next step
   due to a power failure most likely will brick your \dap{}.}
   Update your \daps{} firmware with the patched bootloader. To do this, turn
   the jukebox on. The update process should start automatically. The \playerman{} will
@@ -644,7 +644,7 @@ The new build will be installed over your current build.\\
   USB mode, you will see two visible partitions, the 150~MB firmware
   partition (containing at least a file called \fname{nk.bin}) and
   the main data partition. Rockbox \emph{must} be installed onto the main
-  data partiton.\\}
+  data partition.\\}
 }
 
 \nopt{hwcodec}{

manual/getting_started/mpio_install.tex

@@ -7,7 +7,7 @@
 
 
 \begin{enumerate}
-   \item Download official rockbox bootloader for MPIO HD200 from
+   \item Download official Rockbox bootloader for MPIO HD200 from
    \url {http://download.rockbox.org/bootloader/mpio/hd200}
    and save it to your desktop. The archive contains three files: bootloader.mpio, 
    bootloader.map and rockbox-info.txt. The first file is actual bootloader, two

manual/main_menu/fmradio.tex

@@ -6,8 +6,8 @@
   in case this menu does not show on your unit you can skip this chapter.\\}
 }
 \opt{sansa}{
-  \note{Not all Sansas have a radio receiver. Generally all american models do,
+  \note{Not all Sansas have a radio receiver. Generally all American models do,
-  but european models might not. Rockbox will display the radio menu only if it
+  but European models might not. Rockbox will display the radio menu only if it
   can find a radio receiver in your Sansa.}
 }
 

manual/plugins/blackjack.tex

@@ -8,7 +8,7 @@ Although this may not seem difficult, blackjack is a game renowned for the
 strategy involved. This version includes the ability to split, buy insurance,
 and double down. 
 
-For the full set of rules to the game, and other facinating information
+For the full set of rules to the game, and other fascinating information
 visit\\
 \url{http://www.blackjackinfo.com/blackjack-rules.php}
 

manual/plugins/doom.tex

@@ -65,7 +65,7 @@ Rockdoom options, you will need to quit your current game and restart the plugin
   \emph{Save Game. } Save the current game\\
   \emph{Quit. } Quit the game%\\
 
-  \item[InGame Options Menu. ]This menu has the folloing options:
+  \item[InGame Options Menu. ]This menu has the following options:
   
   \emph{End Game. } Ends the current game\\
   \emph{Messages. }  Enable or Disable in game messages\\

manual/plugins/lrcplayer.tex

@@ -160,4 +160,4 @@ Selecting a line changes its time to the current position of the track.
 To set a specific time or to adjust the time, press \ActionStdContext{} to
 bring up a screen to adjust the time.
 Changes will be saved automatically when the song is changed.
-Edting words in lyrics is not supported.
+Editing words in lyrics is not supported.

manual/plugins/resistor.tex

@@ -23,6 +23,6 @@ an LED safely at a given voltage. First, select the voltage that the LED will
 use (the first option is the most common and a safe bet), and the current
 that it will draw (likewise with the first option). Then, use the onscreen
 keyboard to type in the supply voltage and, if selected, the custom 
-foreward current. This function produces safe estimates, but use your own
+forward current. This function produces safe estimates, but use your own
 judgement when using these output values. Power rating and displayed resistance
 are rounded up to the nearest common value.

manual/plugins/rockpaint.tex

@@ -24,8 +24,8 @@ by section, they are as follows:
         The top left tool shows your colours that are at the ready. To
         swap them, ``click'' on the background colour. To edit the foreground colour,
         click on it.
-    \item[Preset Pallete]
+    \item[Preset Palette]
-        Several preset colours are availible. Clicking on one changes
+        Several preset colours are available. Clicking on one changes
         the foreground of the Colour Picker to the selected colour.
     \item[Pencil]
         Draws as you move the cursor. You can change the brush size with the

manual/rockbox_interface/wps.tex

@@ -220,7 +220,7 @@ can find the \setting{Playlist Viewer Settings}.
   \begin{description}
     \item[Show Icons.] This toggles display of the icon for the currently 
     selected playlist entry and the icon for moving a playlist entry
-    \item[Show Indicies.] This toggles display of the line numbering for
+    \item[Show Indices.] This toggles display of the line numbering for
        the playlist
     \item[Track Display.] This toggles between filename only and full path
        for playlist entries