len0rd/rockbox
1
0
Fork 1
mirror of https://github.com/Rockbox/rockbox.git synced 2025-11-09 21:22:39 -05:00
Code Issues Projects Releases Packages Wiki Activity Actions

Sansa Connect: Manually drive SPI Slave Select

Browse source 
Keep Slave Select active during command transmission. This relaxes
timing requirements on the AVR side.

Change-Id: Ia1a6cf45aba3c11f6aeaa7441c6793807ca827f0
This commit is contained in:
Tomasz Moń 2021-06-24 14:00:19 +02:00
parent b972fe4cdf
commit 635ec5bbbd
1 changed files with 19 additions and 2 deletions
Download patch file Download diff file Expand all files Collapse all files

21
firmware/target/arm/tms320dm320/sansa-connect/avr-sansaconnect.c
View file

@ -333,6 +333,18 @@ static uint8_t spi_read_byte(void)
return rxdata & 0xFF; return rxdata & 0xFF;
} }
static void avr_hid_select(void)
{
/* Drive GIO29 (AVR SS) low */
IO_GIO_BITCLR1 = (1 << 13);
}
static void avr_hid_release(void)
{
/* Drive GIO29 (AVR SS) high */
IO_GIO_BITSET1 = (1 << 13);
}
static bool avr_run_command(uint8_t opcode, uint8_t *data, size_t data_length) static bool avr_run_command(uint8_t opcode, uint8_t *data, size_t data_length)
{ {
bool success = true; bool success = true;
@ -351,6 +363,8 @@ static bool avr_run_command(uint8_t opcode, uint8_t *data, size_t data_length)
bitset16(&IO_CLK_MOD2, CLK_MOD2_SIF1); bitset16(&IO_CLK_MOD2, CLK_MOD2_SIF1);
IO_SERIAL1_TX_ENABLE = 0x0001; IO_SERIAL1_TX_ENABLE = 0x0001;
avr_hid_select();
IO_SERIAL1_TX_DATA = CMD_SYNC; IO_SERIAL1_TX_DATA = CMD_SYNC;
spi_read_byte(); spi_read_byte();
/* Allow AVR to process CMD_SYNC */ /* Allow AVR to process CMD_SYNC */
@ -393,6 +407,8 @@ static bool avr_run_command(uint8_t opcode, uint8_t *data, size_t data_length)
success = success && (rx == CMD_CLOSE); success = success && (rx == CMD_CLOSE);
} }
avr_hid_release();
IO_SERIAL1_TX_ENABLE = 0; IO_SERIAL1_TX_ENABLE = 0;
bitclr16(&IO_CLK_MOD2, CLK_MOD2_SIF1); bitclr16(&IO_CLK_MOD2, CLK_MOD2_SIF1);
@ -428,16 +444,17 @@ void avr_hid_init(void)
{ {
/* /*
setup alternate GIO functions: setup alternate GIO functions:
GIO29 - SIF1 Enable (Directly connected to AVR's SS)
GIO30 - SIF1 Clock GIO30 - SIF1 Clock
GIO31 - SIF1 Data In GIO31 - SIF1 Data In
GIO32 - SIF1 Data Out GIO32 - SIF1 Data Out
Manually drive GIO29 output (directly connected to AVR's SS).
*/ */
IO_GIO_FSEL2 = (IO_GIO_FSEL2 & 0x00FF) | 0xAA00; IO_GIO_FSEL2 = (IO_GIO_FSEL2 & 0x00FF) | 0xA800;
/* GIO29, GIO30 - outputs, GIO31 - input */ /* GIO29, GIO30 - outputs, GIO31 - input */
IO_GIO_DIR1 = (IO_GIO_DIR1 & ~((1 << 13) | (1 << 14))) | (1 << 15); IO_GIO_DIR1 = (IO_GIO_DIR1 & ~((1 << 13) | (1 << 14))) | (1 << 15);
/* GIO32 - output */ /* GIO32 - output */
bitclr16(&IO_GIO_DIR2, (1 << 0)); bitclr16(&IO_GIO_DIR2, (1 << 0));
avr_hid_release();
/* RATE = 219 (0xDB) -> 200 kHz */ /* RATE = 219 (0xDB) -> 200 kHz */
IO_SERIAL1_MODE = 0x6DB; IO_SERIAL1_MODE = 0x6DB;