Initial framework for the Sandisk Sansa Clip Zip

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30365 a1c6a512-1295-4272-9138-f99709370657

apps/bitmaps/native/SOURCES

@@ -9,6 +9,8 @@ rockboxlogo.128x42x1.bmp
 #else
 rockboxlogo.112x30x1.bmp
 #endif
+#elif (LCD_WIDTH == 96) && (LCD_DEPTH == 16)
+rockboxlogo.96x30x16.bmp
 #elif (LCD_WIDTH == 128) && (LCD_DEPTH == 2)
 rockboxlogo.128x42x2.bmp
 #elif (LCD_WIDTH == 128) && (LCD_DEPTH == 16)

bootloader/sansa_as3525.c

@@ -93,7 +93,7 @@ void main(void)
     int btn = button_read_device();
 
 #if !defined(SANSA_FUZE) && !defined(SANSA_CLIP) && !defined(SANSA_CLIPV2) \
-    && !defined(SANSA_CLIPPLUS)
+    && !defined(SANSA_CLIPPLUS) && !defined(SANSA_CLIPZIP)
     if (button_hold())
     {
         verbose = true;

firmware/SOURCES

@@ -1475,6 +1475,20 @@ target/arm/imx233/sansa-fuzeplus/power-fuzeplus.c
 #endif /* SIMULATOR */
 #endif
 
+#ifdef SANSA_CLIPZIP
+#ifndef SIMULATOR
+target/arm/as3525/sansa-clipzip/lcd-clipzip.c
+target/arm/as3525/sansa-clipzip/button-clipzip.c
+target/arm/as3525/sansa-clipzip/backlight-clipzip.c
+#ifndef BOOTLOADER
+target/arm/powermgmt-ascodec.c
+target/arm/as3525/sansa-clipzip/powermgmt-clipzip.c
+//target/arm/as3525/sansa-clipzip/lcd-as-clip-plus.S
+target/arm/as3525/tuner-as3525v2.c
+#endif /* !BOOTLOADER */
+#endif /* !SIMULATOR */
+#endif /* SANSA_CLIPZIP */
+
 #ifdef IAUDIO_7
 #ifndef SIMULATOR
 drivers/nand_id.c

firmware/export/config.h

@@ -224,6 +224,7 @@
 #define LCD_IPOD6G    40 /* as used by the iPod Nano 2nd Generation */
 #define LCD_FUZEPLUS  41
 #define LCD_SPFD5420A 42 /* rk27xx */
+#define LCD_CLIPZIP   43 /* as used by the Sandisk Sansa Clip Zip */
 
 /* LCD_PIXELFORMAT */
 #define HORIZONTAL_PACKING 1
@@ -430,6 +431,8 @@ Lyre prototype 1 */
 #include "config/sansafuzev2.h"
 #elif defined(SANSA_FUZEPLUS)
 #include "config/sansafuzeplus.h"
+#elif defined(SANSA_CLIPZIP)
+#include "config/sansaclipzip.h"
 #elif defined(SANSA_C200V2)
 #include "config/sansac200v2.h"
 #elif defined(SANSA_VIEW)

firmware/export/config/sansaclipzip.h

@@ -0,0 +1,202 @@
+/*
+ * This config file is for the Sandisk Sansa Clip Zip
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 79
+#define MODEL_NAME   "Sandisk Sansa Zip"
+#define FIRMWARE_OFFSET_FILE_DATA 8
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+
+#ifndef BOOTLOADER
+#define HAVE_MULTIDRIVE
+#define NUM_DRIVES 2
+#define HAVE_HOTSWAP
+#endif
+
+#define HW_SAMPR_CAPS       SAMPR_CAP_ALL
+
+/* define this if you have recording possibility */
+#define HAVE_RECORDING
+
+#define REC_SAMPR_CAPS      SAMPR_CAP_ALL
+
+/* Define bitmask of input sources - recordable bitmask can be defined
+   explicitly if different */
+#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* LCD dimensions */
+#define LCD_WIDTH  96
+#define LCD_HEIGHT 96
+#define LCD_DEPTH  16   /* 65536 colours */
+#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 swapped */
+
+/* define this if you have LCD enable function */
+//#define HAVE_LCD_ENABLE
+
+#ifndef BOOTLOADER
+/* Define this if your LCD can be put to sleep.
+ * HAVE_LCD_ENABLE should be defined as well. */
+//#define HAVE_LCD_SLEEP
+//#define HAVE_LCD_SLEEP_SETTING
+#endif
+
+/* define this if you can flip your LCD */
+#define HAVE_LCD_FLIP
+
+/* define this if you can invert the pixels */
+#define HAVE_LCD_INVERT
+
+/* Define this if your LCD can set contrast */
+#define HAVE_LCD_CONTRAST
+
+#define MIN_CONTRAST_SETTING        0
+#define MAX_CONTRAST_SETTING        50
+#define DEFAULT_CONTRAST_SETTING    30
+
+#define IRAM_LCDFRAMEBUFFER IDATA_ATTR /* put the lcd frame buffer in IRAM */
+
+#define CONFIG_KEYPAD SANSA_CLIP_PAD
+
+/* define this if the target has volume keys which can be used in the lists */
+#define HAVE_VOLUME_IN_LIST
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+/* There is no hardware tone control */
+#define HAVE_SW_TONE_CONTROLS
+
+/* AS3514 or newer */
+#define HAVE_AS3514
+#define HAVE_AS3543
+
+#ifndef BOOTLOADER
+/* define this if you have a real-time clock */
+#define CONFIG_RTC RTC_AS3514
+
+/* Define if the device can wake from an RTC alarm */
+#define HAVE_RTC_ALARM
+#endif
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+#define HAVE_FAT16SUPPORT
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE (0x100000-0x8000)
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x80000
+
+#define AB_REPEAT_ENABLE
+
+/* FM Tuner */
+#define CONFIG_TUNER SI4700 /* in fact SI4702 */
+//#define HAVE_TUNER_PWR_CTRL
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+
+/* define this if you have a flash memory storage */
+#define HAVE_FLASH_STORAGE
+
+/* define this if the flash memory uses the SecureDigital Memory Card protocol */
+#define CONFIG_STORAGE STORAGE_SD
+
+#define BATTERY_CAPACITY_DEFAULT 290    /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 290        /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 290        /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 0          /* capacity increment */
+#define BATTERY_TYPES_COUNT  1          /* only one type */
+
+/* Charging implemented in a target-specific algorithm */
+#define CONFIG_CHARGING CHARGING_TARGET
+
+/* define this if the unit can be powered or charged via USB */
+#define HAVE_USB_POWER
+
+/** Non-simulator section **/
+#ifndef SIMULATOR
+
+/* Define this if you have a AMS AS3525v2 SoC */
+#define CONFIG_CPU AS3525v2
+
+/* Define this if you want to use the AS3525 i2c interface */
+#define CONFIG_I2C I2C_AS3525
+
+/* define this if the hardware can be powered off while charging */
+/* Sansa can't be powered off while charging */
+/* #define HAVE_POWEROFF_WHILE_CHARGING */
+
+/* define current usage levels (based on battery bench) */
+#define CURRENT_NORMAL     19               /* TODO copied from clipplus */
+#define CURRENT_BACKLIGHT  15               /* TODO copied from clipplus */
+#define CURRENT_RECORD     CURRENT_NORMAL   /* TODO */
+
+/* maximum charging current */
+#define CURRENT_MAX_CHG   150
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ      240000000
+
+/* Type of LCD */
+#define CONFIG_LCD LCD_CLIPZIP
+
+/* USB On-the-go */
+#define CONFIG_USBOTG USBOTG_AS3525v2
+
+/* enable these for the experimental usb stack */
+#define HAVE_USBSTACK
+#define USB_HANDLED_BY_OF
+//#define USE_ROCKBOX_USB
+#define USB_VENDOR_ID 0x0781    /* TODO */
+#define USB_PRODUCT_ID 0x74d1   /* TODO */
+
+
+/* Virtual LED (icon) */
+#define CONFIG_LED LED_VIRTUAL
+
+/* Define this if you have adjustable CPU frequency */
+//#define HAVE_ADJUSTABLE_CPU_FREQ
+
+#define BOOTFILE_EXT    "sansa"
+#define BOOTFILE        "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#define ICODE_ATTR_TREMOR_NOT_MDCT
+
+#define INCLUDE_TIMEOUT_API
+
+#endif /* SIMULATOR */
+
+/** Port-specific settings **/
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_BRIGHTNESS_SETTING      1   /* TODO */
+#define MAX_BRIGHTNESS_SETTING     12   /* TODO */
+#define DEFAULT_BRIGHTNESS_SETTING  6   /* TODO */
+
+/* Default recording levels */
+#define DEFAULT_REC_MIC_GAIN    23
+#define DEFAULT_REC_LEFT_GAIN   23
+#define DEFAULT_REC_RIGHT_GAIN  23
+
+/* Define this if a programmable hotkey is mapped */
+//#define HAVE_HOTKEY

firmware/target/arm/as3525/fmradio-i2c-as3525.c

@@ -40,7 +40,8 @@
 #define I2C_SCL_PIN 4
 #define I2C_SDA_PIN 5
 
-#elif     defined(SANSA_CLIPV2) || defined(SANSA_CLIPPLUS)
+#elif   defined(SANSA_CLIPV2) || defined(SANSA_CLIPPLUS) \
+     || defined(SANSA_CLIPZIP)
 #define I2C_SCL_GPIO(x) GPIOB_PIN(x)
 #define I2C_SDA_GPIO(x) GPIOB_PIN(x)
 #define I2C_SCL_GPIO_DIR GPIOB_DIR

firmware/target/arm/as3525/memory-init.S

@@ -30,7 +30,8 @@
 #define MEMORY_MODEL 0x21
 
 #elif defined(SANSA_E200V2) || defined(SANSA_FUZE) || defined(SANSA_CLIPV2) \
-    || defined(SANSA_CLIPPLUS) || defined(SANSA_FUZEV2)
+    || defined(SANSA_CLIPPLUS) || defined(SANSA_FUZEV2) \
+    || defined(SANSA_CLIPZIP)
 /* 16 bits external bus, high performance SDRAM, 64 Mbits = 8 Mbytes */
 #define MEMORY_MODEL 0x5
 

firmware/target/arm/as3525/powermgmt-target.h

@@ -78,6 +78,15 @@
 #define BATT_CHG_I          CHG_I_200MA
 #define CHARGER_TOTAL_TIMER (4*3600*2)
 
+#elif defined(SANSA_CLIPZIP)
+
+/* Check if topped-off and monitor voltage while plugged. */
+#define BATT_FULL_VOLTAGE   4160
+#define BATT_VAUTO_RECHARGE 4100
+#define BATT_CHG_V          CHG_V_4_20V
+#define BATT_CHG_I          CHG_I_150MA
+#define CHARGER_TOTAL_TIMER (4*3600*2)  /* about 1.5 * capacity / current */
+
 #elif defined(SANSA_C200V2)
 
 /* Check if topped-off and monitor voltage while plugged. */

firmware/target/arm/as3525/sansa-clipzip/backlight-clipzip.c

@@ -0,0 +1,42 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright © 2011 Bertrik Sikken
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#include "backlight-target.h"
+#include "lcd.h"
+#include "as3525v2.h"
+#include "ascodec-target.h"
+
+void _backlight_init()
+{
+    /* GPIO B2 controls backlight */
+    GPIOB_DIR |= (1 << 2);
+}
+
+void _backlight_on(void)
+{
+    /* TODO */
+}
+
+void _backlight_off(void)
+{
+    /* TODO */
+}
+

firmware/target/arm/as3525/sansa-clipzip/backlight-target.h

@@ -0,0 +1,30 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright © 2011 Bertrik Sikken
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#ifndef BACKLIGHT_TARGET_H
+#define BACKLIGHT_TARGET_H
+
+void _backlight_init(void);
+void _backlight_on(void);
+void _backlight_off(void);
+
+#define _backlight_panic_on() _backlight_on()
+
+#endif

firmware/target/arm/as3525/sansa-clipzip/button-clipzip.c

@@ -0,0 +1,103 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2008 François Dinel
+ * Copyright ©   2008-2009 Rafaël Carré
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#include "config.h"
+
+#include "button-target.h"
+#include "as3525v2.h"
+#include "kernel.h"
+#include "system-target.h"
+
+void button_init_device(void)
+{
+    /* GPIO A6, A7 and D6 are direct button inputs */
+    GPIOA_DIR &= ~(1 << 6);
+    GPIOA_DIR &= ~(1 << 7);
+    GPIOD_DIR &= ~(1 << 6);
+    
+    /* GPIO C1, C2, C3, C4, C5 are used in a column/row key scan matrix */
+    GPIOC_DIR |= ((1 << 1) | (1 << 2));
+    GPIOC_DIR &= ~((1 << 3) | (1 << 4) | (1 << 5));
+}
+
+/*  TODO:
+    Instead of using udelay to wait for buttons to settle, we could use a
+    simple state machine to alternate between key matrix rows (like we do on
+    the clip) and this way avoid burning cycles in the udelay.
+    
+    TODO:
+    Figure out the real mappings from GPIOs to buttons.
+    The current mapping is just an educated guess.
+*/
+int button_read_device(void)
+{
+    int buttons = 0;
+
+    /* power */
+    if (GPIOD_PIN(6)) {
+        buttons |= BUTTON_POWER;
+    }
+
+    /* volume */
+    if (GPIOA_PIN(6)) {
+        buttons |= BUTTON_VOL_DOWN;
+    }
+    if (GPIOA_PIN(7)) {
+        buttons |= BUTTON_VOL_UP;
+    }
+
+    /* key matrix buttons, first row */
+    GPIOC_PIN(1) = (1 << 1);
+    GPIOC_PIN(2) = 0;
+    udelay(500);
+    
+    if (GPIOC_PIN(3)) {
+        buttons |= BUTTON_LEFT;
+    }
+    if (GPIOC_PIN(4)) {
+        buttons |= BUTTON_SELECT;
+    }
+    if (GPIOC_PIN(5)) {
+        buttons |= BUTTON_RIGHT;
+    }
+    
+    /* key matrix buttons, second row */
+    GPIOC_PIN(1) = 0;
+    GPIOC_PIN(2) = (1 << 2);
+    udelay(500);
+    
+    if (GPIOC_PIN(3)) {
+        buttons |= BUTTON_UP;
+    }
+    if (GPIOC_PIN(4)) {
+        buttons |= BUTTON_HOME;
+    }
+    if (GPIOC_PIN(5)) {
+        buttons |= BUTTON_DOWN;
+    }
+    
+    /* deselect scan rows */
+    GPIOC_PIN(2) = 0;
+
+    return buttons;
+}
+

firmware/target/arm/as3525/sansa-clipzip/button-target.h

@@ -0,0 +1,55 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2008 François Dinel
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#ifndef _BUTTON_TARGET_H_
+#define _BUTTON_TARGET_H_
+
+#include "config.h"
+
+void button_init_device(void);
+int button_read_device(void);
+
+/* Main unit's buttons */
+#define BUTTON_HOME         0x00000001
+
+#define BUTTON_VOL_UP       0x00000002
+#define BUTTON_VOL_DOWN     0x00000004
+
+#define BUTTON_UP           0x00000008
+#define BUTTON_DOWN         0x00000010
+#define BUTTON_LEFT         0x00000020
+#define BUTTON_RIGHT        0x00000040
+
+#define BUTTON_SELECT       0x00000080
+
+#define BUTTON_POWER        0x00000100
+
+#define BUTTON_MAIN (BUTTON_HOME|BUTTON_VOL_UP|BUTTON_VOL_DOWN\
+                    |BUTTON_UP|BUTTON_DOWN|BUTTON_LEFT|BUTTON_RIGHT\
+                    |BUTTON_SELECT|BUTTON_POWER)
+
+#define BUTTON_REMOTE 0
+
+/* Software power-off */
+#define POWEROFF_BUTTON BUTTON_POWER
+#define POWEROFF_COUNT 10
+
+#endif /* _BUTTON_TARGET_H_ */

firmware/target/arm/as3525/sansa-clipzip/lcd-clipzip.c

@@ -0,0 +1,103 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2008 François Dinel
+ * Copyright (C) 2008-2009 Rafaël Carré
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include "config.h"
+
+#include "lcd.h"
+#include "lcd-clip.h"
+#include "system.h"
+#include "cpu.h"
+
+static int display_type;
+
+int lcd_hw_init(void)
+{
+    bitset32(&CGU_PERI, CGU_SSP_CLOCK_ENABLE);
+
+    SSP_CPSR = AS3525_SSP_PRESCALER;    /* OF = 0x10 */
+    SSP_CR0 = (1<<7) | (1<<6) | 7;  /* Motorola SPI frame format, 8 bits */
+    SSP_CR1 = (1<<3) | (1<<1);  /* SSP Operation enabled */
+    SSP_IMSC = 0;       /* No interrupts */
+
+    /* configure GPIO B2 (display D/C#) as output */
+    GPIOB_DIR |= (1<<2);
+
+    /* configure GPIO B3 (display type detect) as input */
+    GPIOB_DIR &= ~(1<<3);
+
+    /* set GPIO A5 (display RESET# ?) */
+    GPIOA_DIR |= (1<<5);
+    GPIOA_PIN(5) = (1<<5);
+
+    /* detect display type on GPIO B3 */    
+    return GPIOB_PIN(3) ? 1 : 0;
+}
+
+void lcd_write_command(int byte)
+{
+    while(SSP_SR & (1<<4))  /* BSY flag */
+        ;
+
+    /* LCD command mode */
+    GPIOB_PIN(2) = 0;
+    
+    SSP_DATA = byte;
+    while(SSP_SR & (1<<4))  /* BSY flag */
+        ;
+}
+
+void lcd_write_data(const fb_data* p_bytes, int count)
+{
+    /* LCD data mode */
+    GPIOB_PIN(2) = (1<<2);
+
+    while (count--)
+    {
+        while(!(SSP_SR & (1<<1)))   /* wait until transmit FIFO is not full */
+            ;
+
+        SSP_DATA = *p_bytes++;
+    }
+}
+
+void lcd_update(void)
+{
+    /* TODO */
+}
+
+void lcd_init_device(void)
+{
+    /* TODO */
+    display_type = lcd_hw_init();
+}
+
+/* Update a fraction of the display. */
+void lcd_update_rect(int x, int y, int width, int height)
+{
+    (void) x;
+    (void) y;
+    (void) width;
+    (void) height;
+    
+    /* TODO not implemented yet, do a full update instead */
+    lcd_update();
+}
+

rbutil/mkamsboot/mkamsboot.c

@@ -122,6 +122,7 @@ const struct ams_models ams_identity[] = {
     [MODEL_FUZEV2]  = { 2, 2, "Fuze",  dualboot_fuzev2,   sizeof(dualboot_fuzev2),   "fuz2", 68 },
     [MODEL_FUZE]    = { 1, 1, "Fuze",  dualboot_fuze,     sizeof(dualboot_fuze),     "fuze", 43 },
     [MODEL_M200V4]  = { 4, 1, "m200",  dualboot_m200v4,   sizeof(dualboot_m200v4),   "m2v4", 42 },
+    [MODEL_CLIPZIP] = { 1, 2, "ClipZip", NULL, 0, "clzp", 79 }, /* TODO */
 };
 
 
@@ -169,6 +170,8 @@ static struct md5sums sansasums[] = {
     { MODEL_FUZEV2, "2.02.26", "d4f6f85c3e4a8ea8f2e5acc421641801" },
     { MODEL_FUZEV2, "2.03.31", "74fb197ccd51707388f3b233402186a6" },
     { MODEL_FUZEV2, "2.03.33", "1599cc73d02ea7fe53fe2d4379c24b66" },
+
+    { MODEL_CLIPZIP, "1.01.12", "45adea0873326b5af34f096e5c402f78" },
 };
 
 #define NUM_MD5S (sizeof(sansasums)/sizeof(sansasums[0]))

rbutil/mkamsboot/mkamsboot.h

@@ -43,6 +43,7 @@ enum {
     MODEL_C200V2,
     MODEL_CLIPPLUS,
     MODEL_FUZEV2,
+    MODEL_CLIPZIP,
     /* new models go here */
 
     NUM_MODELS

tools/configure

@@ -1276,14 +1276,14 @@ cat <<EOF
  123) VX777               112) M3                62) Sansa Clip+
                                                  63) Sansa Fuze v2
  ==Samsung==              ==Tatung==             64) Sansa Fuze+
- 140) YH-820              150) Elio TPJ-1022     
+ 140) YH-820              150) Elio TPJ-1022     65) Sansa Clip Zip
- 141) YH-920                                     ==Logik==
+ 141) YH-920                                     
- 142) YH-925              ==Packard Bell==       80) DAX 1GB MP3/DAB
+ 142) YH-925              ==Packard Bell==       ==Logik==
- 143) YP-S3               160) Vibe 500
+ 143) YP-S3               160) Vibe 500          80) DAX 1GB MP3/DAB
-                                                 ==Lyre project==
+                                                 
-==Application==           ==MPIO==               130) Lyre proto 1
+==Application==           ==MPIO==               ==Lyre project==
- 200) SDL                 170) HD200             131) Mini2440
+ 200) SDL                 170) HD200             130) Lyre proto 1
- 201) Android             171) HD300
+ 201) Android             171) HD300             131) Mini2440
  202) Nokia N8xx
  203) Nokia N900          ==ROCKCHIP==
  204) Pandora             180) rk27xx generic
@@ -2525,6 +2525,26 @@ fi
     arm926ejscc
     ;;
 
+   65|sansaclipzip)
+    target_id=68
+    modelname="sansaclipzip"
+    target="-DSANSA_CLIPZIP"
+    memory=8 # not sure
+    bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
+    bmp2rb_native="$rootdir/tools/bmp2rb -f 5"
+    tool="$rootdir/tools/scramble -add=clzp"
+    output="rockbox.sansa"
+    bootoutput="bootloader-clipzip.sansa"
+    appextra="recorder:gui:radio"
+    plugins="yes"
+    swcodec="yes"
+    toolset=$scramblebitmaptools
+    t_cpu="arm"
+    t_manufacturer="as3525"
+    t_model="sansa-clipzip"
+    arm926ejscc
+    ;;
+
    150|tatungtpj1022)
     target_id=25
     modelname="tatungtpj1022"

tools/scramble.c

@@ -126,7 +126,7 @@ void usage(void)
     printf("\t                   9200, 1630, 6330, ldax, m200, c100, clip, e2v2,\n"
            "\t                   m2v4, fuze, c2v2, clv2, y820, y920, y925, x747,\n"
            "\t                   747p, x777, nn2g, m244, cli+, fuz2, hd20, hd30,\n"
-           "\t                   ip6g, rk27)\n");
+           "\t                   ip6g, rk27, clzp)\n");
     printf("\nNo option results in Archos standard player/recorder format.\n");
 
     exit(1);
@@ -339,6 +339,8 @@ int main (int argc, char** argv)
             modelnum = 72;
         else if (!strcmp(&argv[1][5], "rk27")) /* rockchip 27xx generic */
             modelnum = 73;
+        else if (!strcmp(&argv[1][5], "clzp")) /* Sansa Clip Zip */
+            modelnum = 79;
         else {
             fprintf(stderr, "unsupported model: %s\n", &argv[1][5]);
             return 2;