iPod Classic: use the new USB DesignWare driver

Change-Id: I36aabb5cb9cfe2d8c4f8fbcea944efec58ef9671

firmware/SOURCES

@@ -1615,7 +1615,7 @@ target/arm/s5l8702/postmortemstub.S
 #endif
 target/arm/s5l8702/ipod6g/pmu-ipod6g.c
 target/arm/s5l8702/ipod6g/rtc-ipod6g.c
-target/arm/s5l8700/usb-nano2g-6g.c
+target/arm/s5l8702/usb-s5l8702.c
 #ifdef HAVE_SERIAL
 target/arm/uc870x.c
 target/arm/s5l8702/uart-s5l8702.c

firmware/export/config/ipod6g.h

@@ -238,12 +238,15 @@
 #define DEFAULT_BRIGHTNESS_SETTING  0x20
 
 /* USB defines */
+#define CONFIG_USBOTG USBOTG_DESIGNWARE
+#define USB_DW_CLOCK 0
+#define USB_DW_TURNAROUND 5
+/* logf() over USB serial (http://www.rockbox.org/wiki/PortalPlayerUsb) */
+//#define USB_ENABLE_SERIAL
 #define HAVE_USBSTACK
 #define HAVE_USB_HID_MOUSE
-#define CONFIG_USBOTG USBOTG_S3C6400X
 #define USB_VENDOR_ID 0x05AC
 #define USB_PRODUCT_ID 0x1261
-#define USB_NUM_ENDPOINTS 6
 #define USB_DEVBSS_ATTR __attribute__((aligned(32)))
 
 #define USB_READ_BUFFER_SIZE (1024*24)

firmware/export/s5l8702.h

@@ -175,8 +175,21 @@
 /////USB/////
 #define OTGBASE 0x38400000
 #define PHYBASE 0x3C400000
-#define SYNOPSYSOTG_CLOCK 0
-#define SYNOPSYSOTG_AHBCFG (GAHBCFG_dma_enable | (GAHBCFG_INT_DMA_BURST_INCR8 << GAHBCFG_hburstlen_bitp) | GAHBCFG_glblintrmsk)
+
+/* OTG PHY control registers */
+#define OPHYPWR     (*((uint32_t volatile*)(PHYBASE + 0x000)))
+#define OPHYCLK     (*((uint32_t volatile*)(PHYBASE + 0x004)))
+#define ORSTCON     (*((uint32_t volatile*)(PHYBASE + 0x008)))
+#define OPHYUNK3    (*((uint32_t volatile*)(PHYBASE + 0x018)))
+#define OPHYUNK1    (*((uint32_t volatile*)(PHYBASE + 0x01c)))
+#define OPHYUNK2    (*((uint32_t volatile*)(PHYBASE + 0x044)))
+
+/* 9 available EPs (0b00000001111101010000000111101011), 6 used */
+#define USB_NUM_ENDPOINTS 6
+
+/* Define this if the DWC implemented on this SoC does not support
+   DMA or you want to disable it. */
+// #define USB_DW_ARCH_SLAVE
 
 
 /////I2C/////

firmware/target/arm/s5l8702/usb-s5l8702.c

@@ -0,0 +1,137 @@
+/***************************************************************************
+*             __________               __   ___.
+*   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+*   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+*   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+*   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+*                     \/            \/     \/    \/            \/
+* $Id$
+*
+* Copyright (C) 2014 Michael Sparmann
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+*
+* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+* KIND, either express or implied.
+*
+****************************************************************************/
+#include <inttypes.h>
+
+#include "config.h"
+#include "usb.h"
+#include "usb_drv.h"
+#ifdef HAVE_USBSTACK
+#include "usb_core.h"
+#endif
+
+#include "s5l8702.h"
+#include "clocking-s5l8702.h"
+#include "usb-designware.h"
+
+
+const struct usb_dw_config usb_dw_config =
+{
+    .phytype = DWC_PHYTYPE_UTMI_16,
+
+    /* Available FIFO memory: 0x820 words */
+    .rx_fifosz   = 0x360,
+    .nptx_fifosz = 0x40,   /* 1 dedicated FIFO for IN0 */
+    .ptx_fifosz  = 0x180,  /* 3 dedicated FIFOs for IN1,IN3,IN5 */
+
+#ifdef USB_DW_ARCH_SLAVE
+    .disable_double_buffering = false,
+#else
+    .ahb_burst_len = HBSTLEN_INCR8,
+    .ahb_threshold = 8,
+#endif
+};
+
+void usb_dw_target_enable_clocks()
+{
+    clockgate_enable(CLOCKGATE_USBOTG, true);
+    clockgate_enable(CLOCKGATE_USBPHY, true);
+
+    OPHYPWR = 0;  /* PHY: Power up */
+    udelay(10);
+    OPHYUNK1 = 1;
+    OPHYUNK2 = 0xe3f;
+    ORSTCON = 1;  /* PHY: Assert Software Reset */
+    udelay(10);
+    ORSTCON = 0;  /* PHY: Deassert Software Reset */
+    udelay(10);
+    OPHYUNK3 = 0x600;
+    OPHYCLK = USB_DW_CLOCK;
+    udelay(400);
+}
+
+void usb_dw_target_disable_clocks()
+{
+    OPHYPWR = 0xf;  /* PHY: Power down */
+    udelay(10);
+    ORSTCON = 7;  /* PHY: Assert Software Reset */
+    udelay(10);
+
+    clockgate_enable(CLOCKGATE_USBOTG, false);
+    clockgate_enable(CLOCKGATE_USBPHY, false);
+}
+
+void usb_dw_target_enable_irq()
+{
+    VICINTENABLE(IRQ_USB_FUNC >> 5) = 1 << (IRQ_USB_FUNC & 0x1f);
+}
+
+void usb_dw_target_disable_irq()
+{
+    VICINTENCLEAR(IRQ_USB_FUNC >> 5) = 1 << (IRQ_USB_FUNC & 0x1f);
+}
+
+void usb_dw_target_clear_irq()
+{
+}
+
+/* RB API */
+static int usb_status = USB_EXTRACTED;
+
+void usb_enable(bool on)
+{
+#ifdef HAVE_USBSTACK
+    if (on) usb_core_init();
+    else usb_core_exit();
+#else
+    (void)on;
+#endif
+}
+
+int usb_detect(void)
+{
+    return usb_status;
+}
+
+void usb_insert_int(void)
+{
+    usb_status = USB_INSERTED;
+#ifdef USB_STATUS_BY_EVENT
+    usb_status_event(USB_INSERTED);
+#endif
+}
+
+void usb_remove_int(void)
+{
+    usb_status = USB_EXTRACTED;
+#ifdef USB_STATUS_BY_EVENT
+    usb_status_event(USB_EXTRACTED);
+#endif
+}
+
+void usb_init_device(void)
+{
+    /* Power up the core clocks to allow writing
+       to some registers needed to power it down */
+    usb_dw_target_disable_irq();
+    usb_dw_target_enable_clocks();
+
+    usb_drv_exit();
+}