diff --git a/firmware/target/arm/imx233/kernel-imx233.c b/firmware/target/arm/imx233/kernel-imx233.c
index b3760a4782..c3ee2e8bd3 100644
--- a/firmware/target/arm/imx233/kernel-imx233.c
+++ b/firmware/target/arm/imx233/kernel-imx233.c
@@ -37,7 +37,6 @@ void tick_start(unsigned int interval_in_ms)
         false, &tick_timer);
 }
 
-
 void arbiter_init(struct channel_arbiter_t *a, unsigned count)
 {
     mutex_init(&a->mutex);
diff --git a/firmware/target/arm/imx233/power-imx233.c b/firmware/target/arm/imx233/power-imx233.c
index 5041c3b7fc..ccbd12b4ef 100644
--- a/firmware/target/arm/imx233/power-imx233.c
+++ b/firmware/target/arm/imx233/power-imx233.c
@@ -146,27 +146,6 @@ void imx233_power_init(void)
     BF_SET(POWER_CTRL, ENIRQ_VDD5V_GT_VDDIO);
 #endif
     imx233_icoll_enable_interrupt(INT_SRC_VDD5V, true);
-    /* setup linear regulator offsets to 25 mV below to prevent contention between
-     * linear regulators and DCDC */
-#if IMX233_SUBTARGET >= 3700
-    BF_WR(POWER_VDDDCTRL, LINREG_OFFSET, 2);
-    BF_WR(POWER_VDDACTRL, LINREG_OFFSET, 2);
-    BF_WR(POWER_VDDIOCTRL, LINREG_OFFSET, 2);
-    /* enable DCDC (more efficient) */
-    BF_SET(POWER_5VCTRL, ENABLE_DCDC);
-#else
-    BF_SET(POWER_5VCTRL, LINREG_OFFSET);
-    BF_SET(POWER_5VCTRL, EN_DCDC1);
-    BF_SET(POWER_5VCTRL, EN_DCDC2);
-#endif
-
-#if IMX233_SUBTARGET >= 3780
-    /* enable a few bits controlling the DC-DC as recommended by Freescale */
-    BF_SET(POWER_LOOPCTRL, TOGGLE_DIF);
-    BF_SET(POWER_LOOPCTRL, EN_CM_HYST);
-    BF_CLR(POWER_LOOPCTRL, EN_RCSCALE);
-    BF_SETV(POWER_LOOPCTRL, EN_RCSCALE, 1);
-#endif
 }
 
 void power_init(void)
diff --git a/firmware/target/arm/imx233/powermgmt-imx233.c b/firmware/target/arm/imx233/powermgmt-imx233.c
index 8980124b33..9819406974 100644
--- a/firmware/target/arm/imx233/powermgmt-imx233.c
+++ b/firmware/target/arm/imx233/powermgmt-imx233.c
@@ -44,19 +44,46 @@ int _battery_voltage(void)
     return BF_RD(POWER_BATTMONITOR, BATT_VAL) * 8;
 }
 
-void powermgmt_init_target(void)
+void imx233_powermgmt_init(void)
 {
     imx233_power_set_charge_current(IMX233_CHARGE_CURRENT);
     imx233_power_set_stop_current(IMX233_STOP_CURRENT);
-#if IMX233_SUBTARGET >= 3780
     /* assume that adc_init was called and battery monitoring via LRADC setup */
     BF_WR(POWER_BATTMONITOR, EN_BATADJ, 1);
+#if IMX233_SUBTARGET >= 3700
+    /* setup linear regulator offsets to 25 mV below to prevent contention between
+     * linear regulators and DCDC */
+    BF_WR(POWER_VDDDCTRL, LINREG_OFFSET, 2);
+    BF_WR(POWER_VDDACTRL, LINREG_OFFSET, 2);
+    BF_WR(POWER_VDDIOCTRL, LINREG_OFFSET, 2);
+    /* enable DCDC (more efficient) */
+    BF_SET(POWER_5VCTRL, ENABLE_DCDC);
+    BF_CLR(POWER_5VCTRL, DCDC_XFER);
+#else
+    BF_SET(POWER_5VCTRL, LINREG_OFFSET);
+    BF_SET(POWER_5VCTRL, EN_DCDC1);
+    BF_SET(POWER_5VCTRL, EN_DCDC2);
+#endif
+
+#if IMX233_SUBTARGET >= 3780
+    /* enable a few bits controlling the DC-DC as recommended by Freescale */
+    BF_SET(POWER_LOOPCTRL, TOGGLE_DIF);
+    BF_SET(POWER_LOOPCTRL, EN_CM_HYST);
+    BF_CLR(POWER_LOOPCTRL, EN_RCSCALE);
+    BF_SETV(POWER_LOOPCTRL, EN_RCSCALE, 1);
+    /* adjust arbitration between 4.2 and battery */
+    BF_WR(POWER_DCDC4P2, CMPTRIP, 0); /* 85% */
+    BF_WR(POWER_DCDC4P2, DROPOUT_CTRL, 0xe); /* select greater, 200 mV drop */
     /* make sure we are in a known state: disable charger and 4p2 */
     BF_SET(POWER_CHARGE, PWD_BATTCHRG);
     BF_WR(POWER_DCDC4P2, ENABLE_DCDC, 0);
     BF_WR(POWER_DCDC4P2, ENABLE_4P2, 0);
     BF_SET(POWER_5VCTRL, PWD_CHARGE_4P2);
 #endif
+}
+
+void powermgmt_init_target(void)
+{
     charge_state = DISCHARGING;
 }
 
@@ -106,9 +133,6 @@ void charging_algorithm_step(void)
         {
             logf("pwrmgmt: enable dcdc and charger");
             logf("pwrmgmt: trickle -> charging");
-            /* adjust arbitration between 4.2 and battery */
-            BF_WR(POWER_DCDC4P2, CMPTRIP, 0); /* 85% */
-            BF_WR(POWER_DCDC4P2, DROPOUT_CTRL, 0xe); /* select greater, 200 mV drop */
             BF_CLR(POWER_5VCTRL, DCDC_XFER);
             BF_SET(POWER_5VCTRL, ENABLE_DCDC);
             /* enable battery charging */
diff --git a/firmware/target/arm/imx233/powermgmt-imx233.h b/firmware/target/arm/imx233/powermgmt-imx233.h
index 8876a2d62e..07634ec12e 100644
--- a/firmware/target/arm/imx233/powermgmt-imx233.h
+++ b/firmware/target/arm/imx233/powermgmt-imx233.h
@@ -24,6 +24,7 @@
 #include "config.h"
 #include "powermgmt.h"
 
+void imx233_powermgmt_init(void);
 void powermgmt_init_target(void);
 void charging_algorithm_step(void);
 void charging_algorithm_close(void);
diff --git a/firmware/target/arm/imx233/system-imx233.c b/firmware/target/arm/imx233/system-imx233.c
index aa1c216e46..d1f2cfbf15 100644
--- a/firmware/target/arm/imx233/system-imx233.c
+++ b/firmware/target/arm/imx233/system-imx233.c
@@ -43,6 +43,7 @@
 #include "backlight-target.h"
 #include "button.h"
 #include "fmradio_i2c.h"
+#include "powermgmt.h"
 
 void imx233_chip_reset(void)
 {
@@ -132,6 +133,7 @@ void system_init(void)
     imx233_lradc_init();
     imx233_power_init();
     imx233_i2c_init();
+    imx233_powermgmt_init();
 
     /* make sure auto-slow is disable now, we don't know at which frequency we
      * are running and auto-slow could violate constraints on {xbus,hbus} */