len0rd/rockbox
1
0
Fork 1
mirror of https://github.com/Rockbox/rockbox.git synced 2025-12-09 05:05:20 -05:00
Code Issues Projects Releases Packages Wiki Activity Actions

Meizu: use hardware PWM instead of interrupts+GPIO to set the backlight brightness level

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21772 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Bertrik Sikken 2009-07-11 13:43:04 +00:00
parent e976c51df8
commit 306753b1ed
1 changed files with 19 additions and 54 deletions
Download patch file Download diff file Expand all files Collapse all files

73
firmware/target/arm/s5l8700/backlight-meizu.c
View file

@ -26,55 +26,20 @@
#include "system.h" #include "system.h"
/* /*
Interrupt-driven backlight driver using the PWM mode of a hardware timer. Backlight driver using the PWM mode of a hardware timer.
Backlight brightness is implemented by configuring one of the timers in The PWM duty cycle depends exponentially on the configured brightness
the SoC for PWM mode. In this mode, two interrupts are generated for each level. This makes the brightness curve more linear to the human eye.
cycle, one at the start of the cycle and another one sometime between the
first interrupt and the start of the next cycle. The backlight is switched
on at the first interrupt and switched off at the second interrupt. This
way, the position in time of the second interrupt determines the duty cycle
and thereby the brightness of the backlight.
The backlight is switched on and off by means of a GPIO pin.
*/ */
void INT_TIMERA(void)
{
unsigned int tacon = TACON;
/* clear interrupts */
TACON = tacon;
/* TA_INT1, start of PWM cycle: enable backlight */
if (tacon & (1 << 17)) {
PDAT0 |= (1 << 2);
}
/* TA_INT0, disable backlight until next cycle */
if (tacon & (1 << 16)) {
PDAT0 &= ~(1 << 2);
}
}
void _backlight_set_brightness(int brightness) void _backlight_set_brightness(int brightness)
{ {
static const unsigned char logtable[] = {0, 1, 2, 3, 5, 7, 10, 15, 22, 31, 44, 63, 90, 127, 180, 255}; /* pwm = (sqrt(2)**x)-1, where brightness level x = 0..16 */
static const unsigned char logtable[] =
{0, 1, 2, 3, 5, 7, 10, 15, 22, 31, 44, 63, 90, 127, 180, 255};
if (brightness == MIN_BRIGHTNESS_SETTING) { /* set PWM width */
/* turn backlight fully off and disable interrupt */ TCDATA0 = 255 - logtable[brightness];
PDAT0 &= ~(1 << 2);
INTMSK &= ~(1 << 5);
}
else if (brightness == MAX_BRIGHTNESS_SETTING) {
/* turn backlight fully on and disable interrupt */
PDAT0 |= (1 << 2);
INTMSK &= ~(1 << 5);
}
else {
/* set PWM width and enable interrupt */
TADATA0 = logtable[brightness];
INTMSK |= (1 << 5);
}
} }
void _backlight_on(void) void _backlight_on(void)
@ -89,22 +54,22 @@ void _backlight_off(void)
bool _backlight_init(void) bool _backlight_init(void)
{ {
/* enable backlight pin as GPIO */ /* enable backlight pin as timer output */
PCON0 = ((PCON0 & ~(3 << 4)) | (1 << 4)); PCON0 = ((PCON0 & ~(3 << 4)) | (2 << 4));
/* enable timer clock */ /* enable timer clock */
PWRCON &= ~(1 << 4); PWRCON &= ~(1 << 4);
/* configure timer */ /* configure timer */
TACMD = (1 << 1); /* TA_CLR */ TCCMD = (1 << 1); /* TC_CLR */
TACMD = (1 << 0); /* TA_EN */ TCCON = (0 << 13) | /* TC_INT1_EN */
TACON = (1 << 13) | /* TA_INT1_EN */ (0 << 12) | /* TC_INT0_EN */
(1 << 12) | /* TA_INT0_EN */ (0 << 11) | /* TC_START */
(1 << 11) | /* TA_START */ (3 << 8) | /* TC_CS = PCLK / 64 */
(3 << 8) | /* TA_CS = PCLK / 64 */ (1 << 4); /* TC_MODE_SEL = PWM mode */
(1 << 4); /* TA_MODE_SEL = PWM mode */ TCDATA1 = 255; /* set PWM period */
TADATA1 = 255; /* set PWM period */ TCPRE = 30; /* prescaler */
TAPRE = 30; /* prescaler */ TCCMD = (1 << 0); /* TC_EN */
_backlight_on(); _backlight_on();