Merge target/arm/as3525/as3525-codec.h into target/arm/ascodec-target.h

The AMS Sansa use the same AS3514 registers (except USB_UTIL which was added)
Use the register defines in AMS Sansa code instead of hardcoded values

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19073 a1c6a512-1295-4272-9138-f99709370657

firmware/export/as3514.h

@@ -52,6 +52,7 @@ extern void audiohw_set_sample_rate(int sampling_control);
 #define AS3514_AUDIOSET1  0x14
 #define AS3514_AUDIOSET2  0x15
 #define AS3514_AUDIOSET3  0x16
+#define AS3514_USB_UTIL   0x17  /* Only in AS3525 ? */
 #define AS3514_PLLMODE    0x1d
 
 #define AS3514_SYSTEM     0x20

firmware/target/arm/as3525/as3525-codec.c

@@ -37,11 +37,9 @@
     interrupt bit 7 is raised and DACNT is not decremented after the transfer.
  */
 
-#include "as3525-codec.h"
+#include "ascodec-target.h"
 #include "as3525.h"
 
-#define AUDIO_I2C_ADDR  0x46
-
 #define I2C2_DATA       *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x00))
 #define I2C2_SLAD0      *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x04))
 #define I2C2_CNTRL      *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x0C))
@@ -72,7 +70,7 @@ void ascodec_init(void)
     I2C2_CPSR1 = 0;     /* MSB */    
     
     /* set i2c slave address of codec part */
-    I2C2_SLAD0 = AUDIO_I2C_ADDR << 1;
+    I2C2_SLAD0 = AS3514_I2C_ADDR << 1;
 
     I2C2_CNTRL = 0x51;
 }

firmware/target/arm/as3525/as3525-codec.h

@@ -1,27 +0,0 @@
-/***************************************************************************
- *             __________               __   ___.
- *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
- *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
- *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
- *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
- *                     \/            \/     \/    \/            \/
- * $Id$
- *
- * Copyright (C) 2008 by Bertrik Sikken
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-
-void ascodec_init(void);
-
-int ascodec_write(int index, int value);
-int ascodec_read(int index);
-
-

firmware/target/arm/as3525/backlight-e200v2-fuze.c

@@ -23,7 +23,7 @@
 #include "system.h"
 #include "lcd.h"
 #include "backlight.h"
-#include "as3525-codec.h"
+#include "ascodec-target.h"
 #include "as3514.h"
 
 static unsigned short backlight_brightness = DEFAULT_BRIGHTNESS_SETTING;

firmware/target/arm/as3525/power-as3525.c

@@ -20,13 +20,14 @@
  ****************************************************************************/
 
 #include "config.h"
-#include "as3525-codec.h"
+#include "ascodec-target.h"
+#include "as3514.h"
 #include <stdbool.h>
 
 void power_off(void)
 {
     /* clear bit 0 of system register */
-    ascodec_write(0x20, ascodec_read(0x20) & ~1);
+    ascodec_write(AS3514_SYSTEM, ascodec_read(AS3514_SYSTEM) & ~1);
 
     /* TODO : turn off peripherals properly ? */
 
@@ -40,7 +41,7 @@ void power_init(void)
 #if CONFIG_CHARGING
 bool charger_inserted(void)
 {
-    if(ascodec_read(0x25) & (1<<5))
+    if(ascodec_read(AS3514_IRQ_ENRD0) & (1<<5))
         return true;
     else
         return false;

firmware/target/arm/as3525/system-as3525.c

@@ -23,7 +23,7 @@
 #include "kernel.h"
 #include "system.h"
 #include "panic.h"
-#include "as3525-codec.h"
+#include "ascodec-target.h"
 
 #define default_interrupt(name) \
   extern __attribute__((weak,alias("UIRQ"))) void name (void)

firmware/target/arm/ascodec-target.h

@@ -27,18 +27,16 @@
 
 #include "config.h"
 
-#ifdef CPU_PP
+#if defined(SANSA_E200) || defined(SANSA_C200) || defined(PHILIPS_SA9200) || \
-/* TODO: This header is actually portalplayer specific, and should be
+    CONFIG_CPU==AS3525
- * moved into an appropriate subdir  */
-
-#include "i2c-pp.h"
-
-#if defined(SANSA_E200) || defined(SANSA_C200) || defined(PHILIPS_SA9200)
 #define AS3514_I2C_ADDR 0x46
 #else
 #error Unknown target!
 #endif
 
+#ifdef CPU_PP
+#include "i2c-pp.h"
+
 static inline int ascodec_write(unsigned int reg, unsigned int value)
 {
     return pp_i2c_send(AS3514_I2C_ADDR, reg, value);
@@ -63,7 +61,12 @@ static inline void ascodec_unlock(void)
 {
     i2c_unlock();
 }
+#elif CONFIG_CPU==AS3525
+void ascodec_init(void);
 
-#endif /* CPU_PP */
+int ascodec_write(int index, int value);
+
+int ascodec_read(int index);
+#endif
 
 #endif /* !_ASCODEC_TARGET_H */