Major rework of mkamsboot, extending work done by Rafael Carre. We now build one "dualboot.bin" mini-bootloader per target and embed it in the mkamsboot binary. The user of mkamsboot just needs to provide an original firmware file, and a Rockbox bootloader file. This code currently supports just the Clip (hardware revision 1) and the E200v2 - button checks are needed for the other V2 targets. NOTE: This is completely untested on-target, and may brick your device.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18767 a1c6a512-1295-4272-9138-f99709370657
2025-12-09 13:15:18 -05:00 · 2008-10-11 11:35:59 +00:00 · 2008-10-11 11:35:59 +00:00 · 1c4bcfac69
commit 1c4bcfac69
parent ced0adc527
6 changed files with 623 additions and 247 deletions
--- a/rbutil/mkamsboot/dualboot.S
+++ b/rbutil/mkamsboot/dualboot.S
@ -0,0 +1,126 @@
+.text
+
+/* This is the size of the Clip's RAM, but there is nothing to be gained
+   (at the moment) by making use of the larger RAM of other targets */
+
+.set DRAM_SIZE, 0x50000
+
+.set GPIOA,     0xC80B0000
+.set GPIOB,     0xC80C0000
+.set GPIOC,     0xC80D0000
+.set GPIOD,     0xC80E0000
+.set CGU_PERI,  0xC80F0014
+
+
+/* Vectors */
+        ldr   pc, =start
+.word   0
+.word   0
+.word   0
+.word   0
+.word   0
+.word   0
+.word   0
+
+/* These values are filled in by mkamsboot - don't move them from offset 0x20 */
+uclunpack_end:   .word   0 /* End of the ucl_unpack function */
+uclunpack_size:  .word   0 /* Size in bytes of the ucl_unpack function */
+
+ucl_of_end:      .word   0 /* End of the ucl-compressed OF image */
+ucl_of_size:     .word   0 /* Size in bytes of the compressed OF image */
+
+ucl_rb_end:      .word   0 /* End of the ucl-compressed RB image */
+ucl_rb_size:     .word   0 /* Size in bytes of the compressed RB image */
+
+
+start:
+        /* First copy the UCL unpack function to the end of RAM */
+        ldr   r0, uclunpack_end     /* Source */
+        ldr   r1, uclunpack_size    /* Source length */
+        sub   r2, r0, r1            /* Source start - 1*/
+
+        ldr   r3, =DRAM_SIZE        /* Destination end */
+
+uclcopy:
+        ldrb  r4, [r0], #-1
+        strb  r4, [r3], #-1
+        cmp   r2, r3
+        bne   uclcopy
+
+        add   r5, r2, #2            /* r5 is entry point of copy of uclunpack */
+                                    /* function, plus one (for thumb mode */
+
+        /* enable gpio clock */
+        ldr   r0, =CGU_PERI
+        ldr   r1, [r0]
+        orr   r1, r1, #(1<<16)
+        str   r1, [r0]
+
+        /* we check A3 unconditionally of the model because it seems to be */
+        /* either hold, either usb on every model */
+
+        ldr   r0, =GPIOA
+        mov   r1, #0
+        str   r1, [r0, #0x400]
+        ldr   r1, [r0, #0x20]    /* read pin A3 */
+
+        cmp   r1, #0
+        bne   boot_of
+
+        /* here are model specific tests, for dual boot without a computer */
+
+#ifdef SANSA_CLIP
+        /* HOME button */
+        ldr   r0, =GPIOB
+        mov   r1, #0
+        str   r1, [r0, #0x400]
+        ldr   r1, [r0, #0x10]   /* read pin B2 */
+
+        cmp   r1, #0
+        bne   boot_of
+#elif defined(SANSA_E200V2)
+        /* DOWN button */
+        ldr   r0, =GPIOC
+        mov   r1, #0
+        str   r1, [r0, #0x400]
+        ldr   r1, [r0, #0x100]   /* read pin C6 */
+
+        cmp   r1, #0             /* C6 = #0 means button pressed */
+        beq   boot_of
+#else
+        #error No target-specific key check defined!
+#endif
+
+        /* No button was held, so we boot rockbox */
+        ldr   r0, ucl_rb_end   /* Address of compressed image */
+        ldr   r1, ucl_rb_size    /* Compressed size */
+        b     decompress
+
+boot_of:
+        ldr   r0, ucl_of_end     /* Address of compressed image */
+        ldr   r1, ucl_of_size    /* Compressed size */
+
+
+decompress:
+        /* At this point:                                              */
+        /* r5 = entry point (plus one for thumb) of uclunpack function */
+        /* r3 = destination_end for copy of UCL image                  */
+        /* r0 = source_end for UCL image to copy                       */
+        /* r1 = size of UCL image to copy                              */
+
+        sub   r4, r3, r1      /* r4 := destination_start - 1 */
+        
+fw_copy:
+        ldrb  r2, [r0], #-1
+        strb  r2, [r3], #-1
+        cmp   r3, r4          /* Stop when we reached dest_start-1 */
+        bne   fw_copy
+
+        /* Call the ucl decompress function, which will branch to 0x0 */
+        /* on completion */
+        add   r0, r3, #1      /* r0 := Start of compressed image */
+                              /* r1 already contains compressed size */
+        mov   r2, #0          /* r2 := Destination for unpacking */
+        bx    r5              /* Branch to uclunpack, switching to thumb */
+
+        /* never reached */