esp32-clickwheel/lib/TFT_eSPI/User_Setups/Setup72_ESP32_ST7789_172x320.h
2024-03-06 12:40:28 +01:00

51 lines
2.1 KiB
C

// Support for 1.47" 320x172 Round Rectangle Color IPS TFT Display
#define USER_SETUP_ID 71
#define ST7789_2_DRIVER // Full configuration option, define additional
// parameters
// below for this display
#define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
#define TFT_WIDTH 240 // ST7789 172 x 320
#define TFT_HEIGHT 320 // ST7789 240 x 320
// #define TFT_BL 21 // LED back-light control pin
#define TFT_BACKLIGHT_ON HIGH // Level to turn ON back-light (HIGH or LOW)
// #define TFT_MOSI 23
// #define TFT_SCLK 18
// #define TFT_CS 5 // Chip select control pin
// #define TFT_DC 22 // Data Command control pin
// #define TFT_RST 17 // Reset pin (could connect to RST pin)
#define TFT_MISO 37
#define TFT_MOSI 35
#define TFT_SCLK 36
#define TFT_CS 6 // Chip select control pin
#define TFT_DC 5 // Data Command control pin
// #define TFT_RST 4 // Reset pin (could connect to RST pin)
#define TFT_RST 9 // Set TFT_RST to -1 if display RESET is connected to
// ESP32 board RST
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in
// FLASH
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in
// FLASH, 96 characters
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in
// FLASH, 96 characters
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH,
// only characters 1234567890:-.apm
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in
// FLASH, only characters 1234567890:-.
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH,
// only characters 1234567890:-.
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower,
// so 3 digits fit a 160 pixel TFT
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free
// fonts FF1 to FF48 and custom fonts
#define SMOOTH_FONT
#define SPI_FREQUENCY 27000000