// Support for 1.47" 320x172 Round Rectangle Color IPS TFT Display #define USER_SETUP_ID 71 #define ST7789_2_DRIVER // Full configuration option, define additional // parameters // below for this display #define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red #define TFT_WIDTH 240 // ST7789 172 x 320 #define TFT_HEIGHT 320 // ST7789 240 x 320 // #define TFT_BL 21 // LED back-light control pin #define TFT_BACKLIGHT_ON HIGH // Level to turn ON back-light (HIGH or LOW) // #define TFT_MOSI 23 // #define TFT_SCLK 18 // #define TFT_CS 5 // Chip select control pin // #define TFT_DC 22 // Data Command control pin // #define TFT_RST 17 // Reset pin (could connect to RST pin) #define TFT_MISO 37 #define TFT_MOSI 35 #define TFT_SCLK 36 #define TFT_CS 6 // Chip select control pin #define TFT_DC 5 // Data Command control pin // #define TFT_RST 4 // Reset pin (could connect to RST pin) #define TFT_RST 9 // Set TFT_RST to -1 if display RESET is connected to // ESP32 board RST #define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in // FLASH #define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in // FLASH, 96 characters #define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in // FLASH, 96 characters #define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, // only characters 1234567890:-.apm #define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in // FLASH, only characters 1234567890:-. #define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, // only characters 1234567890:-. //#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, // so 3 digits fit a 160 pixel TFT #define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free // fonts FF1 to FF48 and custom fonts #define SMOOTH_FONT #define SPI_FREQUENCY 27000000