len0rd/FreeRTOS-Kernel
1
0
Fork 0
mirror of https://github.com/FreeRTOS/FreeRTOS-Kernel.git synced 2025-10-17 10:17:45 -04:00
Code Issues Projects Releases Packages Wiki Activity
FreeRTOS-Kernel/FreeRTOS/Demo/RISC-V_RV64_PolarFire_SoftConsole
History
Aniruddha Kanhere 1277ba1661
Revert "Remove coroutines (#874)" (#1019) 
* Revert "Remove coroutines (#874)"

This reverts commit 569c78fd8c.

* Update freertos Kernel submodule to latest head

* Remove temporary files

* Fix MingW demos and spell check

* Fix manifest version; fix headers

* Add ignore files and paths to core-checker.py

* Fix copyright in remaining files

* Fix PR check build failure

1. Remove defining `inline` in Makefile. This was causing build
   warnings.
2. Ensure that the linker removed unused functions from various
   compilation units.
3. Update the linker script so that all the functions are correctly
   placed in FLASH section.

Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>

---------

Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Co-authored-by: Gaurav Aggarwal <aggarg@amazon.com>
2023-06-09 15:25:48 -07:00
..
blinky_demo [AUTO][RELEASE]: Bump file header version to "202212.00" 2022-12-10 01:17:30 +00:00
full_demo Expand RV32E demo support, prevent 'ebreak' looping (#883) 2023-02-06 21:00:09 -08:00
polarfire_hal Add demo project for Polarfire board (#679) 2021-09-02 14:02:46 -07:00
.cproject Add demo project for Polarfire board (#679) 2021-09-02 14:02:46 -07:00
.gitignore Add demo project for Polarfire board (#679) 2021-09-02 14:02:46 -07:00
.project Revert "Remove coroutines (#874)" (#1019) 2023-06-09 15:25:48 -07:00
FreeRTOSConfig.h Revert "Remove coroutines (#874)" (#1019) 2023-06-09 15:25:48 -07:00
FreeRTOSDemo_Debug.launch Add demo project for Polarfire board (#679) 2021-09-02 14:02:46 -07:00
main.c [AUTO][RELEASE]: Bump file header version to "202212.00" 2022-12-10 01:17:30 +00:00
README.md Add demo project for Polarfire board (#679) 2021-09-02 14:02:46 -07:00
vector_table.S [AUTO][RELEASE]: Bump file header version to "202212.00" 2022-12-10 01:17:30 +00:00

README.md

UART configuration

On connecting Icicle kit J11 to the host PC, you should see four COM port interfaces connected. This example project uses MMUART0. To use this project the host PC must connect to the COM port interface0 using a terminal emulator such as HyperTerminal or PuTTY configured as follows:

  • 115200 baud.
  • 8 data bits.
  • 1 stop bit.
  • no parity.
  • no flow control.

Target hardware

This example project is targeted at the Icicle kit. Details are available at the following link: https://www.microsemi.com/existing-parts/parts/152514

SoftConsole details

SoftConsole version used to test this project is available at link below: https://www.microsemi.com/product-directory/design-tools/4879-softconsole#downloads