FreeRTOS-Kernel/FreeRTOS/Demo/AVR_Dx_MPLAB.X/main.c
RichardBarry a9680a54cf
Fix warnings after moving callback prototypes (#208)
* Recently the prototypes for the application hook functions were
moved out of the kernel .c files and into the .h files.  That
changes results in compile time warnings for projects that provide
hook functions with a slightly different prototype - in particular
where signed char * is used in place of just char * as an older
FreeRTOS coding convention required chars to be explicitly qualified
as signed or unsigned.

This checkin fixes the warnings by ensuring the signature of
implemented hook functions matches the signature of the prototypes.
2020-08-27 00:40:47 -07:00

94 lines
3.1 KiB
C

/*
(C) 2020 Microchip Technology Inc. and its subsidiaries.
Subject to your compliance with these terms, you may use Microchip software and
any derivatives exclusively with Microchip products. It is your responsibility
to comply with third party license terms applicable to your use of third party
software (including open source software) that may accompany Microchip software.
THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, WHETHER EXPRESS,
IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, INCLUDING ANY IMPLIED WARRANTIES
OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE,
INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER
RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF
THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE FULLEST EXTENT ALLOWED
BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY RELATED TO THIS
SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY, THAT YOU HAVE PAID DIRECTLY
TO MICROCHIP FOR THIS SOFTWARE.
*/
#include <avr/io.h>
#include "FreeRTOS.h"
#include "clk_config.h"
#define mainSELECTED_APPLICATION 0
/* Configure the hardware as necessary to run this demo. */
static void prvSetupHardware( void );
#if ( mainSELECTED_APPLICATION == 0 )
extern void main_blinky( void );
extern void init_blinky( void );
#elif ( mainSELECTED_APPLICATION == 1 )
extern void main_minimal( void );
extern void init_minimal( void );
#elif ( mainSELECTED_APPLICATION == 2 )
extern void main_full( void );
extern void init_full( void );
#else
#error Invalid mainSELECTED_APPLICATION setting. See the comments at the top of this file and above the mainSELECTED_APPLICATION definition.
#endif
int main( void )
{
prvSetupHardware();
#if ( mainSELECTED_APPLICATION == 0 )
main_blinky();
#elif ( mainSELECTED_APPLICATION == 1 )
main_minimal();
#elif ( mainSELECTED_APPLICATION == 2 )
main_full();
#endif
return 0;
}
static void prvSetupHardware( void )
{
/* Ensure no interrupts execute while the scheduler is in an inconsistent
state. Interrupts are automatically enabled when the scheduler is
started. */
portDISABLE_INTERRUPTS();
CLK_init();
#if ( mainSELECTED_APPLICATION == 0 )
init_blinky();
#elif ( mainSELECTED_APPLICATION == 1 )
init_minimal();
#elif ( mainSELECTED_APPLICATION == 2 )
init_full();
#endif
}
/* vApplicationStackOverflowHook is called when a stack overflow occurs.
This is usefull in application development, for debugging. To use this
hook, uncomment it, and set configCHECK_FOR_STACK_OVERFLOW to 1 in
"FreeRTOSConfig.h" header file. */
// void vApplicationStackOverflowHook(TaskHandle_t *pxTask, char *pcTaskName )
// {
// for( ;; );
// }
/* vApplicationMallocFailedHook is called when memorry allocation fails.
This is usefull in application development, for debugging. To use this
hook, uncomment it, and set configUSE_MALLOC_FAILED_HOOK to 1 in
"FreeRTOSConfig.h" header file. */
// void vApplicationMallocFailedHook( void )
// {
// for( ;; );
// }