mirror of
https://github.com/FreeRTOS/FreeRTOS-Kernel.git
synced 2025-06-16 17:29:04 -04:00
158 lines
6.9 KiB
C
158 lines
6.9 KiB
C
/***********************************************************************************************************************
|
|
* DISCLAIMER
|
|
* This software is supplied by Renesas Electronics Corporation and is only intended for use with Renesas products. No
|
|
* other uses are authorized. This software is owned by Renesas Electronics Corporation and is protected under all
|
|
* applicable laws, including copyright laws.
|
|
* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
|
|
* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. TO THE MAXIMUM
|
|
* EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES
|
|
* SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY REASON RELATED TO THIS
|
|
* SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
|
|
* Renesas reserves the right, without notice, to make changes to this software and to discontinue the availability of
|
|
* this software. By using this software, you agree to the additional terms and conditions found by accessing the
|
|
* following link:
|
|
* http://www.renesas.com/disclaimer
|
|
*
|
|
* Copyright (C) 2012 Renesas Electronics Corporation. All rights reserved.
|
|
***********************************************************************************************************************/
|
|
/***********************************************************************************************************************
|
|
* File Name : hwsetup.c
|
|
* Device(s) : RX
|
|
* H/W Platform : RSK+RX63N
|
|
* Description : Defines the initialisation routines used each time the MCU is restarted.
|
|
***********************************************************************************************************************/
|
|
/***********************************************************************************************************************
|
|
* History : DD.MM.YYYY Version Description
|
|
* : 22.11.2011 1.00 First Release
|
|
***********************************************************************************************************************/
|
|
|
|
/***********************************************************************************************************************
|
|
Includes <System Includes> , "Project Includes"
|
|
***********************************************************************************************************************/
|
|
/* I/O Register and board definitions */
|
|
#include "platform.h"
|
|
/* Contains delcarations for the functions defined in this file */
|
|
#include "hwsetup.h"
|
|
|
|
/***********************************************************************************************************************
|
|
Private global variables and functions
|
|
***********************************************************************************************************************/
|
|
/* MCU I/O port configuration function delcaration */
|
|
static void output_ports_configure(void);
|
|
|
|
/* Interrupt configuration function delcaration */
|
|
static void interrupts_configure(void);
|
|
|
|
/* MCU peripheral module configuration function declaration */
|
|
static void peripheral_modules_enable(void);
|
|
|
|
|
|
/***********************************************************************************************************************
|
|
* Function name: hardware_setup
|
|
* Description : Contains setup functions called at device restart
|
|
* Arguments : none
|
|
* Return value : none
|
|
***********************************************************************************************************************/
|
|
void hardware_setup(void)
|
|
{
|
|
output_ports_configure();
|
|
interrupts_configure();
|
|
peripheral_modules_enable();
|
|
}
|
|
|
|
/***********************************************************************************************************************
|
|
* Function name: output_ports_configure
|
|
* Description : Configures the port and pin direction settings, and sets the pin outputs to a safe level.
|
|
* Arguments : none
|
|
* Return value : none
|
|
***********************************************************************************************************************/
|
|
void output_ports_configure(void)
|
|
{
|
|
/* Enable LEDs. */
|
|
/* Start with LEDs off. */
|
|
LED0 = LED_OFF;
|
|
LED1 = LED_OFF;
|
|
LED2 = LED_OFF;
|
|
LED3 = LED_OFF;
|
|
|
|
/* Set LED pins as outputs. */
|
|
LED0_PDR = 1;
|
|
LED1_PDR = 1;
|
|
LED2_PDR = 1;
|
|
LED3_PDR = 1;
|
|
|
|
/* Enable switches. */
|
|
/* Set pins as inputs. */
|
|
SW1_PDR = 0;
|
|
SW2_PDR = 0;
|
|
SW3_PDR = 0;
|
|
|
|
/* Set port mode registers for switches. */
|
|
SW1_PMR = 0;
|
|
SW2_PMR = 0;
|
|
SW3_PMR = 0;
|
|
|
|
/* Initialize RSPI pins that are used with on-board SPI flash. */
|
|
/* Set pin outputs to low to begin with. */
|
|
PORT2.PODR.BIT.B7 = 0x00; /* RSPCKB */
|
|
PORT2.PODR.BIT.B6 = 0x00; /* MOSIB */
|
|
PORT3.PODR.BIT.B0 = 0x00; /* MISOB */
|
|
PORT3.PODR.BIT.B1 = 0x00; /* SSLB0 */
|
|
|
|
/* All GPIO for now */
|
|
PORT2.PMR.BIT.B7 = 0x00;
|
|
PORT2.PMR.BIT.B6 = 0x00;
|
|
PORT3.PMR.BIT.B0 = 0x00;
|
|
PORT3.PMR.BIT.B1 = 0x00;
|
|
|
|
/* Unlock MPC registers to enable writing to them. */
|
|
MPC.PWPR.BIT.B0WI = 0 ; /* Unlock protection register */
|
|
MPC.PWPR.BIT.PFSWE = 1 ; /* Unlock MPC registers */
|
|
|
|
/* Set MPC for RSPI pins */
|
|
MPC.P27PFS.BYTE = 0x0D;
|
|
MPC.P26PFS.BYTE = 0x0D;
|
|
MPC.P30PFS.BYTE = 0x0D;
|
|
|
|
/* RSPI pins assigned to RSPI peripheral. */
|
|
PORT2.PMR.BIT.B7 = 1;
|
|
PORT2.PMR.BIT.B6 = 1;
|
|
PORT3.PMR.BIT.B0 = 1;
|
|
PORT3.PMR.BIT.B1 = 1;
|
|
|
|
/* RSPCKB is output. */
|
|
PORT2.PDR.BIT.B7 = 1;
|
|
/* MOSIB is output. */
|
|
PORT2.PDR.BIT.B6 = 1;
|
|
/* MISOB is input. */
|
|
PORT3.PDR.BIT.B0 = 0;
|
|
/* SSLB0 is output. */
|
|
PORT3.PDR.BIT.B1 = 1;
|
|
|
|
/* Configure the pin connected to the ADC Pot as an input */
|
|
PORT4.PDR.BIT.B0 = 0;
|
|
}
|
|
|
|
/***********************************************************************************************************************
|
|
* Function name: interrupts_configure
|
|
* Description : Configures interrupts used
|
|
* Arguments : none
|
|
* Return value : none
|
|
***********************************************************************************************************************/
|
|
void interrupts_configure(void)
|
|
{
|
|
/* Add code here to setup additional interrupts */
|
|
}
|
|
|
|
/***********************************************************************************************************************
|
|
* Function name: peripheral_modules_enable
|
|
* Description : Enables and configures peripheral devices on the MCU
|
|
* Arguments : none
|
|
* Return value : none
|
|
***********************************************************************************************************************/
|
|
void peripheral_modules_enable(void)
|
|
{
|
|
/* Add code here to enable peripherals used by the application */
|
|
}
|