FreeRTOS-Kernel/FreeRTOS/Demo/RISC-V_RV64_PolarFire_SoftConsole
Gaurav-Aggarwal-AWS dfa1023504
Fix the license year in source files (#681)
This commit also fixes some other formatting issues including, tabs and
comments.

Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
2021-09-02 16:01:57 -07:00
..
blinky_demo Fix the license year in source files (#681) 2021-09-02 16:01:57 -07:00
full_demo Fix the license year in source files (#681) 2021-09-02 16:01:57 -07:00
polarfire_hal Add demo project for Polarfire board (#679) 2021-09-02 14:02:46 -07:00
.cproject Add demo project for Polarfire board (#679) 2021-09-02 14:02:46 -07:00
.gitignore Add demo project for Polarfire board (#679) 2021-09-02 14:02:46 -07:00
.project Add demo project for Polarfire board (#679) 2021-09-02 14:02:46 -07:00
FreeRTOSConfig.h Fix the license year in source files (#681) 2021-09-02 16:01:57 -07:00
FreeRTOSDemo_Debug.launch Add demo project for Polarfire board (#679) 2021-09-02 14:02:46 -07:00
main.c Add demo project for Polarfire board (#679) 2021-09-02 14:02:46 -07:00
README.md Add demo project for Polarfire board (#679) 2021-09-02 14:02:46 -07:00

UART configuration

On connecting Icicle kit J11 to the host PC, you should see four COM port interfaces connected. This example project uses MMUART0. To use this project the host PC must connect to the COM port interface0 using a terminal emulator such as HyperTerminal or PuTTY configured as follows:

  • 115200 baud.
  • 8 data bits.
  • 1 stop bit.
  • no parity.
  • no flow control.

Target hardware

This example project is targeted at the Icicle kit. Details are available at the following link: https://www.microsemi.com/existing-parts/parts/152514

SoftConsole details

SoftConsole version used to test this project is available at link below: https://www.microsemi.com/product-directory/design-tools/4879-softconsole#downloads