mirror of
https://github.com/FreeRTOS/FreeRTOS-Kernel.git
synced 2025-06-04 19:39:04 -04:00
1328 lines
58 KiB
C
1328 lines
58 KiB
C
/* --COPYRIGHT--,BSD
|
|
* Copyright (c) 2014, Texas Instruments Incorporated
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* * Neither the name of Texas Instruments Incorporated nor the names of
|
|
* its contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
|
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
|
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
|
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
* --/COPYRIGHT--*/
|
|
//*****************************************************************************
|
|
//
|
|
// lcd_c.h - Driver for the LCD_C Module.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#ifndef __MSP430WARE_LCD_C_H__
|
|
#define __MSP430WARE_LCD_C_H__
|
|
|
|
#include "inc/hw_memmap.h"
|
|
|
|
#ifdef __MSP430_HAS_LCD_C__
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// If building with a C++ compiler, make all of the definitions in this header
|
|
// have a C binding.
|
|
//
|
|
//*****************************************************************************
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
#include "inc/hw_regaccess.h"
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Used in the LCD_C_init() function as the initParams parameter.
|
|
//
|
|
//*****************************************************************************
|
|
typedef struct LCD_C_initParam
|
|
{
|
|
//! Selects the clock that will be used by the LCD.
|
|
//! \n Valid values are:
|
|
//! - \b LCD_C_CLOCKSOURCE_ACLK [Default]
|
|
//! - \b LCD_C_CLOCKSOURCE_VLOCLK
|
|
uint16_t clockSource;
|
|
//! Selects the divider for LCD_frequency.
|
|
//! \n Valid values are:
|
|
//! - \b LCD_C_CLOCKDIVIDER_1 [Default]
|
|
//! - \b LCD_C_CLOCKDIVIDER_2
|
|
//! - \b LCD_C_CLOCKDIVIDER_3
|
|
//! - \b LCD_C_CLOCKDIVIDER_4
|
|
//! - \b LCD_C_CLOCKDIVIDER_5
|
|
//! - \b LCD_C_CLOCKDIVIDER_6
|
|
//! - \b LCD_C_CLOCKDIVIDER_7
|
|
//! - \b LCD_C_CLOCKDIVIDER_8
|
|
//! - \b LCD_C_CLOCKDIVIDER_9
|
|
//! - \b LCD_C_CLOCKDIVIDER_10
|
|
//! - \b LCD_C_CLOCKDIVIDER_11
|
|
//! - \b LCD_C_CLOCKDIVIDER_12
|
|
//! - \b LCD_C_CLOCKDIVIDER_13
|
|
//! - \b LCD_C_CLOCKDIVIDER_14
|
|
//! - \b LCD_C_CLOCKDIVIDER_15
|
|
//! - \b LCD_C_CLOCKDIVIDER_16
|
|
//! - \b LCD_C_CLOCKDIVIDER_17
|
|
//! - \b LCD_C_CLOCKDIVIDER_18
|
|
//! - \b LCD_C_CLOCKDIVIDER_19
|
|
//! - \b LCD_C_CLOCKDIVIDER_20
|
|
//! - \b LCD_C_CLOCKDIVIDER_21
|
|
//! - \b LCD_C_CLOCKDIVIDER_22
|
|
//! - \b LCD_C_CLOCKDIVIDER_23
|
|
//! - \b LCD_C_CLOCKDIVIDER_24
|
|
//! - \b LCD_C_CLOCKDIVIDER_25
|
|
//! - \b LCD_C_CLOCKDIVIDER_26
|
|
//! - \b LCD_C_CLOCKDIVIDER_27
|
|
//! - \b LCD_C_CLOCKDIVIDER_28
|
|
//! - \b LCD_C_CLOCKDIVIDER_29
|
|
//! - \b LCD_C_CLOCKDIVIDER_30
|
|
//! - \b LCD_C_CLOCKDIVIDER_31
|
|
//! - \b LCD_C_CLOCKDIVIDER_32
|
|
uint16_t clockDivider;
|
|
//! Selects the prescalar for frequency.
|
|
//! \n Valid values are:
|
|
//! - \b LCD_C_CLOCKPRESCALAR_1 [Default]
|
|
//! - \b LCD_C_CLOCKPRESCALAR_2
|
|
//! - \b LCD_C_CLOCKPRESCALAR_4
|
|
//! - \b LCD_C_CLOCKPRESCALAR_8
|
|
//! - \b LCD_C_CLOCKPRESCALAR_16
|
|
//! - \b LCD_C_CLOCKPRESCALAR_32
|
|
uint16_t clockPrescalar;
|
|
//! Selects LCD mux rate.
|
|
//! \n Valid values are:
|
|
//! - \b LCD_C_STATIC [Default]
|
|
//! - \b LCD_C_2_MUX
|
|
//! - \b LCD_C_3_MUX
|
|
//! - \b LCD_C_4_MUX
|
|
//! - \b LCD_C_5_MUX
|
|
//! - \b LCD_C_6_MUX
|
|
//! - \b LCD_C_7_MUX
|
|
//! - \b LCD_C_8_MUX
|
|
uint16_t muxRate;
|
|
//! Selects LCD waveform mode.
|
|
//! \n Valid values are:
|
|
//! - \b LCD_C_STANDARD_WAVEFORMS [Default]
|
|
//! - \b LCD_C_LOW_POWER_WAVEFORMS
|
|
uint16_t waveforms;
|
|
//! Sets LCD segment on/off.
|
|
//! \n Valid values are:
|
|
//! - \b LCD_C_SEGMENTS_DISABLED [Default]
|
|
//! - \b LCD_C_SEGMENTS_ENABLED
|
|
uint16_t segments;
|
|
} LCD_C_initParam;
|
|
|
|
extern const LCD_C_initParam LCD_C_INIT_PARAM;
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the initParams parameter for
|
|
// functions: LCD_C_init().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_CLOCKSOURCE_ACLK (0x0)
|
|
#define LCD_C_CLOCKSOURCE_VLOCLK (LCDSSEL)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the initParams parameter for
|
|
// functions: LCD_C_init().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_CLOCKDIVIDER_1 (LCDDIV_0)
|
|
#define LCD_C_CLOCKDIVIDER_2 (LCDDIV_1)
|
|
#define LCD_C_CLOCKDIVIDER_3 (LCDDIV_2)
|
|
#define LCD_C_CLOCKDIVIDER_4 (LCDDIV_3)
|
|
#define LCD_C_CLOCKDIVIDER_5 (LCDDIV_4)
|
|
#define LCD_C_CLOCKDIVIDER_6 (LCDDIV_5)
|
|
#define LCD_C_CLOCKDIVIDER_7 (LCDDIV_6)
|
|
#define LCD_C_CLOCKDIVIDER_8 (LCDDIV_7)
|
|
#define LCD_C_CLOCKDIVIDER_9 (LCDDIV_8)
|
|
#define LCD_C_CLOCKDIVIDER_10 (LCDDIV_9)
|
|
#define LCD_C_CLOCKDIVIDER_11 (LCDDIV_10)
|
|
#define LCD_C_CLOCKDIVIDER_12 (LCDDIV_11)
|
|
#define LCD_C_CLOCKDIVIDER_13 (LCDDIV_12)
|
|
#define LCD_C_CLOCKDIVIDER_14 (LCDDIV_13)
|
|
#define LCD_C_CLOCKDIVIDER_15 (LCDDIV_14)
|
|
#define LCD_C_CLOCKDIVIDER_16 (LCDDIV_15)
|
|
#define LCD_C_CLOCKDIVIDER_17 (LCDDIV_16)
|
|
#define LCD_C_CLOCKDIVIDER_18 (LCDDIV_17)
|
|
#define LCD_C_CLOCKDIVIDER_19 (LCDDIV_18)
|
|
#define LCD_C_CLOCKDIVIDER_20 (LCDDIV_19)
|
|
#define LCD_C_CLOCKDIVIDER_21 (LCDDIV_20)
|
|
#define LCD_C_CLOCKDIVIDER_22 (LCDDIV_21)
|
|
#define LCD_C_CLOCKDIVIDER_23 (LCDDIV_22)
|
|
#define LCD_C_CLOCKDIVIDER_24 (LCDDIV_23)
|
|
#define LCD_C_CLOCKDIVIDER_25 (LCDDIV_24)
|
|
#define LCD_C_CLOCKDIVIDER_26 (LCDDIV_25)
|
|
#define LCD_C_CLOCKDIVIDER_27 (LCDDIV_26)
|
|
#define LCD_C_CLOCKDIVIDER_28 (LCDDIV_27)
|
|
#define LCD_C_CLOCKDIVIDER_29 (LCDDIV_28)
|
|
#define LCD_C_CLOCKDIVIDER_30 (LCDDIV_29)
|
|
#define LCD_C_CLOCKDIVIDER_31 (LCDDIV_30)
|
|
#define LCD_C_CLOCKDIVIDER_32 (LCDDIV_31)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the initParams parameter for
|
|
// functions: LCD_C_init().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_CLOCKPRESCALAR_1 (LCDPRE_0)
|
|
#define LCD_C_CLOCKPRESCALAR_2 (LCDPRE_1)
|
|
#define LCD_C_CLOCKPRESCALAR_4 (LCDPRE_2)
|
|
#define LCD_C_CLOCKPRESCALAR_8 (LCDPRE_3)
|
|
#define LCD_C_CLOCKPRESCALAR_16 (LCDPRE_4)
|
|
#define LCD_C_CLOCKPRESCALAR_32 (LCDPRE_5)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the initParams parameter for
|
|
// functions: LCD_C_init().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_STATIC (0x0)
|
|
#define LCD_C_2_MUX (LCDMX0)
|
|
#define LCD_C_3_MUX (LCDMX1)
|
|
#define LCD_C_4_MUX (LCDMX1 | LCDMX0)
|
|
#define LCD_C_5_MUX (LCDMX2)
|
|
#define LCD_C_6_MUX (LCDMX2 | LCDMX0)
|
|
#define LCD_C_7_MUX (LCDMX2 | LCDMX1)
|
|
#define LCD_C_8_MUX (LCDMX2 | LCDMX1 | LCDMX0)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the initParams parameter for
|
|
// functions: LCD_C_init().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_STANDARD_WAVEFORMS (0x0)
|
|
#define LCD_C_LOW_POWER_WAVEFORMS (LCDLP)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the initParams parameter for
|
|
// functions: LCD_C_init().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_SEGMENTS_DISABLED (0x0)
|
|
#define LCD_C_SEGMENTS_ENABLED (LCDSON)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the mask parameter for
|
|
// functions: LCD_C_clearInterrupt(), LCD_C_getInterruptStatus(),
|
|
// LCD_C_enableInterrupt(), and LCD_C_disableInterrupt() as well as returned by
|
|
// the LCD_C_getInterruptStatus() function.
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_NO_CAPACITANCE_CONNECTED_INTERRUPT (LCDNOCAPIE)
|
|
#define LCD_C_BLINKING_SEGMENTS_ON_INTERRUPT (LCDBLKONIE)
|
|
#define LCD_C_BLINKING_SEGMENTS_OFF_INTERRUPT (LCDBLKOFFIE)
|
|
#define LCD_C_FRAME_INTERRUPT (LCDFRMIE)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the displayMemory parameter
|
|
// for functions: LCD_C_selectDisplayMemory().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_DISPLAYSOURCE_MEMORY (0x0)
|
|
#define LCD_C_DISPLAYSOURCE_BLINKINGMEMORY (LCDDISP)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the clockDivider parameter
|
|
// for functions: LCD_C_setBlinkingControl().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_BLINK_FREQ_CLOCK_DIVIDER_1 (0x0)
|
|
#define LCD_C_BLINK_FREQ_CLOCK_DIVIDER_2 (LCDBLKDIV0)
|
|
#define LCD_C_BLINK_FREQ_CLOCK_DIVIDER_3 (LCDBLKDIV1)
|
|
#define LCD_C_BLINK_FREQ_CLOCK_DIVIDER_4 (LCDBLKDIV0 | LCDBLKDIV1)
|
|
#define LCD_C_BLINK_FREQ_CLOCK_DIVIDER_5 (LCDBLKDIV2)
|
|
#define LCD_C_BLINK_FREQ_CLOCK_DIVIDER_6 (LCDBLKDIV2 | LCDBLKDIV0)
|
|
#define LCD_C_BLINK_FREQ_CLOCK_DIVIDER_7 (LCDBLKDIV2 | LCDBLKDIV1)
|
|
#define LCD_C_BLINK_FREQ_CLOCK_DIVIDER_8 (LCDBLKDIV2 | LCDBLKDIV1 | LCDBLKDIV0)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the clockPrescalar parameter
|
|
// for functions: LCD_C_setBlinkingControl().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_512 (0x0)
|
|
#define LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_1024 (LCDBLKPRE0)
|
|
#define LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_2048 (LCDBLKPRE1)
|
|
#define LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_4096 (LCDBLKPRE1 | LCDBLKPRE0)
|
|
#define LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_8162 (LCDBLKPRE2)
|
|
#define LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_16384 (LCDBLKPRE2 | LCDBLKPRE0)
|
|
#define LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_32768 (LCDBLKPRE2 | LCDBLKPRE1)
|
|
#define LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_65536 \
|
|
(LCDBLKPRE2 | LCDBLKPRE1 | LCDBLKPRE0)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the blinkingMode parameter
|
|
// for functions: LCD_C_setBlinkingControl().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_BLINK_MODE_DISABLED (LCDBLKMOD_0)
|
|
#define LCD_C_BLINK_MODE_INDIVIDUAL_SEGMENTS (LCDBLKMOD_1)
|
|
#define LCD_C_BLINK_MODE_ALL_SEGMENTS (LCDBLKMOD_2)
|
|
#define LCD_C_BLINK_MODE_SWITCHING_BETWEEN_DISPLAY_CONTENTS (LCDBLKMOD_3)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the bias parameter for
|
|
// functions: LCD_C_selectBias().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_BIAS_1_3 (0x0)
|
|
#define LCD_C_BIAS_1_2 (LCD2B)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the reference parameter for
|
|
// functions: LCD_C_selectChargePumpReference().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_INTERNAL_REFERENCE_VOLTAGE (VLCDREF_0)
|
|
#define LCD_C_EXTERNAL_REFERENCE_VOLTAGE (VLCDREF_1)
|
|
#define LCD_C_INTERNAL_REFERENCE_VOLTAGE_SWITCHED_TO_EXTERNAL_PIN (VLCDREF_2)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the vlcdSource parameter for
|
|
// functions: LCD_C_setVLCDSource().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_VLCD_GENERATED_INTERNALLY (0x0)
|
|
#define LCD_C_VLCD_SOURCED_EXTERNALLY (VLCDEXT)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the v2v3v4Source parameter
|
|
// for functions: LCD_C_setVLCDSource().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_V2V3V4_GENERATED_INTERNALLY_NOT_SWITCHED_TO_PINS (0x0)
|
|
#define LCD_C_V2V3V4_GENERATED_INTERNALLY_SWITCHED_TO_PINS (LCDREXT)
|
|
#define LCD_C_V2V3V4_SOURCED_EXTERNALLY (LCDEXTBIAS)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the v5Source parameter for
|
|
// functions: LCD_C_setVLCDSource().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_V5_VSS (0x0)
|
|
#define LCD_C_V5_SOURCED_FROM_R03 (R03EXT)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the voltage parameter for
|
|
// functions: LCD_C_setVLCDVoltage().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_CHARGEPUMP_DISABLED (0x0)
|
|
#define LCD_C_CHARGEPUMP_VOLTAGE_2_60V_OR_2_17VREF (VLCD0)
|
|
#define LCD_C_CHARGEPUMP_VOLTAGE_2_66V_OR_2_22VREF (VLCD1)
|
|
#define LCD_C_CHARGEPUMP_VOLTAGE_2_72V_OR_2_27VREF (VLCD1 | VLCD0)
|
|
#define LCD_C_CHARGEPUMP_VOLTAGE_2_78V_OR_2_32VREF (VLCD2)
|
|
#define LCD_C_CHARGEPUMP_VOLTAGE_2_84V_OR_2_37VREF (VLCD2 | VLCD0)
|
|
#define LCD_C_CHARGEPUMP_VOLTAGE_2_90V_OR_2_42VREF (VLCD2 | VLCD1)
|
|
#define LCD_C_CHARGEPUMP_VOLTAGE_2_96V_OR_2_47VREF (VLCD2 | VLCD1 | VLCD0)
|
|
#define LCD_C_CHARGEPUMP_VOLTAGE_3_02V_OR_2_52VREF (VLCD3)
|
|
#define LCD_C_CHARGEPUMP_VOLTAGE_3_08V_OR_2_57VREF (VLCD3 | VLCD0)
|
|
#define LCD_C_CHARGEPUMP_VOLTAGE_3_14V_OR_2_62VREF (VLCD3 | VLCD1)
|
|
#define LCD_C_CHARGEPUMP_VOLTAGE_3_20V_OR_2_67VREF (VLCD3 | VLCD1 | VLCD0)
|
|
#define LCD_C_CHARGEPUMP_VOLTAGE_3_26V_OR_2_72VREF (VLCD3 | VLCD2)
|
|
#define LCD_C_CHARGEPUMP_VOLTAGE_3_32V_OR_2_77VREF (VLCD3 | VLCD2 | VLCD0)
|
|
#define LCD_C_CHARGEPUMP_VOLTAGE_3_38V_OR_2_82VREF (VLCD3 | VLCD2 | VLCD1)
|
|
#define LCD_C_CHARGEPUMP_VOLTAGE_3_44V_OR_2_87VREF \
|
|
(VLCD3 | VLCD2 | VLCD1 | VLCD0)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the startPin parameter for
|
|
// functions: LCD_C_setPinAsLCDFunctionEx(); the endPin parameter for
|
|
// functions: LCD_C_setPinAsLCDFunctionEx(); the pin parameter for functions:
|
|
// LCD_C_setPinAsLCDFunction(), LCD_C_setPinAsPortFunction(),
|
|
// LCD_C_setMemory(), and LCD_C_setBlinkingMemory().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_SEGMENT_LINE_0 (0)
|
|
#define LCD_C_SEGMENT_LINE_1 (1)
|
|
#define LCD_C_SEGMENT_LINE_2 (2)
|
|
#define LCD_C_SEGMENT_LINE_3 (3)
|
|
#define LCD_C_SEGMENT_LINE_4 (4)
|
|
#define LCD_C_SEGMENT_LINE_5 (5)
|
|
#define LCD_C_SEGMENT_LINE_6 (6)
|
|
#define LCD_C_SEGMENT_LINE_7 (7)
|
|
#define LCD_C_SEGMENT_LINE_8 (8)
|
|
#define LCD_C_SEGMENT_LINE_9 (9)
|
|
#define LCD_C_SEGMENT_LINE_10 (10)
|
|
#define LCD_C_SEGMENT_LINE_11 (11)
|
|
#define LCD_C_SEGMENT_LINE_12 (12)
|
|
#define LCD_C_SEGMENT_LINE_13 (13)
|
|
#define LCD_C_SEGMENT_LINE_14 (14)
|
|
#define LCD_C_SEGMENT_LINE_15 (15)
|
|
#define LCD_C_SEGMENT_LINE_16 (16)
|
|
#define LCD_C_SEGMENT_LINE_17 (17)
|
|
#define LCD_C_SEGMENT_LINE_18 (18)
|
|
#define LCD_C_SEGMENT_LINE_19 (19)
|
|
#define LCD_C_SEGMENT_LINE_20 (20)
|
|
#define LCD_C_SEGMENT_LINE_21 (21)
|
|
#define LCD_C_SEGMENT_LINE_22 (22)
|
|
#define LCD_C_SEGMENT_LINE_23 (23)
|
|
#define LCD_C_SEGMENT_LINE_24 (24)
|
|
#define LCD_C_SEGMENT_LINE_25 (25)
|
|
#define LCD_C_SEGMENT_LINE_26 (26)
|
|
#define LCD_C_SEGMENT_LINE_27 (27)
|
|
#define LCD_C_SEGMENT_LINE_28 (28)
|
|
#define LCD_C_SEGMENT_LINE_29 (29)
|
|
#define LCD_C_SEGMENT_LINE_30 (30)
|
|
#define LCD_C_SEGMENT_LINE_31 (31)
|
|
#define LCD_C_SEGMENT_LINE_32 (32)
|
|
#define LCD_C_SEGMENT_LINE_33 (33)
|
|
#define LCD_C_SEGMENT_LINE_34 (34)
|
|
#define LCD_C_SEGMENT_LINE_35 (35)
|
|
#define LCD_C_SEGMENT_LINE_36 (36)
|
|
#define LCD_C_SEGMENT_LINE_37 (37)
|
|
#define LCD_C_SEGMENT_LINE_38 (38)
|
|
#define LCD_C_SEGMENT_LINE_39 (39)
|
|
#define LCD_C_SEGMENT_LINE_40 (40)
|
|
#define LCD_C_SEGMENT_LINE_41 (41)
|
|
#define LCD_C_SEGMENT_LINE_42 (42)
|
|
#define LCD_C_SEGMENT_LINE_43 (43)
|
|
#define LCD_C_SEGMENT_LINE_44 (44)
|
|
#define LCD_C_SEGMENT_LINE_45 (45)
|
|
#define LCD_C_SEGMENT_LINE_46 (46)
|
|
#define LCD_C_SEGMENT_LINE_47 (47)
|
|
#define LCD_C_SEGMENT_LINE_48 (48)
|
|
#define LCD_C_SEGMENT_LINE_49 (49)
|
|
#define LCD_C_SEGMENT_LINE_50 (50)
|
|
#define LCD_C_SEGMENT_LINE_51 (51)
|
|
#define LCD_C_SEGMENT_LINE_52 (52)
|
|
#define LCD_C_SEGMENT_LINE_53 (53)
|
|
#define LCD_C_SEGMENT_LINE_54 (54)
|
|
#define LCD_C_SEGMENT_LINE_55 (55)
|
|
#define LCD_C_SEGMENT_LINE_56 (56)
|
|
#define LCD_C_SEGMENT_LINE_57 (57)
|
|
#define LCD_C_SEGMENT_LINE_58 (58)
|
|
#define LCD_C_SEGMENT_LINE_59 (59)
|
|
#define LCD_C_SEGMENT_LINE_60 (60)
|
|
#define LCD_C_SEGMENT_LINE_61 (61)
|
|
#define LCD_C_SEGMENT_LINE_62 (62)
|
|
#define LCD_C_SEGMENT_LINE_63 (63)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are values that can be passed to the syncToClock parameter for
|
|
// functions: LCD_C_configChargePump().
|
|
//
|
|
//*****************************************************************************
|
|
#define LCD_C_SYNCHRONIZATION_DISABLED (0x0)
|
|
#define LCD_C_SYNCHRONIZATION_ENABLED (LCDCPCLKSYNC)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Prototypes for the APIs.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Initializes the LCD Module.
|
|
//!
|
|
//! his function initializes the LCD but without turning on. It bascially setup
|
|
//! the clock source, clock divider, clock prescalar, mux rate, low-power
|
|
//! waveform and segments on/off. After calling this function, user can config
|
|
//! charge pump, internal reference voltage and voltage sources.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param initParams is the pointer to LCD_InitParam structure. See the
|
|
//! following parameters for each field.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_init(uint16_t baseAddress,
|
|
LCD_C_initParam *initParams);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Turns on the LCD module.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//!
|
|
//! Modified bits are \b LCDON of \b LCDCTL0 register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_on(uint16_t baseAddress);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Turns off the LCD module.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//!
|
|
//! Modified bits are \b LCDON of \b LCDCTL0 register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_off(uint16_t baseAddress);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Clears the LCD interrupt flags.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param mask is the masked interrupt flag to be cleared.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_NO_CAPACITANCE_CONNECTED_INTERRUPT
|
|
//! - \b LCD_C_BLINKING_SEGMENTS_ON_INTERRUPT
|
|
//! - \b LCD_C_BLINKING_SEGMENTS_OFF_INTERRUPT
|
|
//! - \b LCD_C_FRAME_INTERRUPT
|
|
//! \n Modified bits are \b LCDCAPIFG, \b LCDBLKONIFG, \b LCDBLKOFFIFG
|
|
//! and \b LCDFRMIFG of \b LCDCTL1 register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_clearInterrupt(uint16_t baseAddress,
|
|
uint16_t mask);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Gets the LCD interrupt status.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param mask is the masked interrupt flags.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_NO_CAPACITANCE_CONNECTED_INTERRUPT
|
|
//! - \b LCD_C_BLINKING_SEGMENTS_ON_INTERRUPT
|
|
//! - \b LCD_C_BLINKING_SEGMENTS_OFF_INTERRUPT
|
|
//! - \b LCD_C_FRAME_INTERRUPT
|
|
//!
|
|
//! \return None
|
|
//! Return Logical OR of any of the following:
|
|
//! - \b LCD_C_NO_CAPACITANCE_CONNECTED_INTERRUPT
|
|
//! - \b LCD_C_BLINKING_SEGMENTS_ON_INTERRUPT
|
|
//! - \b LCD_C_BLINKING_SEGMENTS_OFF_INTERRUPT
|
|
//! - \b LCD_C_FRAME_INTERRUPT
|
|
//! \n indicating the status of the masked interrupts
|
|
//
|
|
//*****************************************************************************
|
|
extern uint16_t LCD_C_getInterruptStatus(uint16_t baseAddress,
|
|
uint16_t mask);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Enables LCD interrupt sources.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param mask is the interrupts to be enabled.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_NO_CAPACITANCE_CONNECTED_INTERRUPT
|
|
//! - \b LCD_C_BLINKING_SEGMENTS_ON_INTERRUPT
|
|
//! - \b LCD_C_BLINKING_SEGMENTS_OFF_INTERRUPT
|
|
//! - \b LCD_C_FRAME_INTERRUPT
|
|
//! \n Modified bits are \b LCDCAPIE, \b LCDBLKONIE, \b LCDBLKOFFIE and
|
|
//! \b LCDFRMIE of \b LCDCTL1 register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_enableInterrupt(uint16_t baseAddress,
|
|
uint16_t mask);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Disables LCD interrupt sources.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param mask is the interrupts to be disabled.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_NO_CAPACITANCE_CONNECTED_INTERRUPT
|
|
//! - \b LCD_C_BLINKING_SEGMENTS_ON_INTERRUPT
|
|
//! - \b LCD_C_BLINKING_SEGMENTS_OFF_INTERRUPT
|
|
//! - \b LCD_C_FRAME_INTERRUPT
|
|
//! \n Modified bits are \b LCDCAPIE, \b LCDBLKONIE, \b LCDBLKOFFIE and
|
|
//! \b LCDFRMIE of \b LCDCTL1 register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_disableInterrupt(uint16_t baseAddress,
|
|
uint16_t mask);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Clears all LCD memory registers.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//!
|
|
//! Modified bits are \b LCDCLRM of \b LCDMEMCTL register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_clearMemory(uint16_t baseAddress);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Clears all LCD blinking memory registers.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//!
|
|
//! Modified bits are \b LCDCLRBM of \b LCDMEMCTL register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_clearBlinkingMemory(uint16_t baseAddress);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Selects display memory.
|
|
//!
|
|
//! This function selects display memory either from memory or blinking memory.
|
|
//! Please note if the blinking mode is selected as
|
|
//! LCD_BLINKMODE_INDIVIDUALSEGMENTS or LCD_BLINKMODE_ALLSEGMENTS or mux rate
|
|
//! >=5, display memory can not be changed. If
|
|
//! LCD_BLINKMODE_SWITCHDISPLAYCONTENTS is selected, display memory bit
|
|
//! reflects current displayed memory.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param displayMemory is the desired displayed memory.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_DISPLAYSOURCE_MEMORY [Default]
|
|
//! - \b LCD_C_DISPLAYSOURCE_BLINKINGMEMORY
|
|
//! \n Modified bits are \b LCDDISP of \b LCDMEMCTL register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_selectDisplayMemory(uint16_t baseAddress,
|
|
uint16_t displayMemory);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Sets the blink settings.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param clockDivider is the clock divider for blinking frequency.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_BLINK_FREQ_CLOCK_DIVIDER_1 [Default]
|
|
//! - \b LCD_C_BLINK_FREQ_CLOCK_DIVIDER_2
|
|
//! - \b LCD_C_BLINK_FREQ_CLOCK_DIVIDER_3
|
|
//! - \b LCD_C_BLINK_FREQ_CLOCK_DIVIDER_4
|
|
//! - \b LCD_C_BLINK_FREQ_CLOCK_DIVIDER_5
|
|
//! - \b LCD_C_BLINK_FREQ_CLOCK_DIVIDER_6
|
|
//! - \b LCD_C_BLINK_FREQ_CLOCK_DIVIDER_7
|
|
//! - \b LCD_C_BLINK_FREQ_CLOCK_DIVIDER_8
|
|
//! \n Modified bits are \b LCDBLKDIVx of \b LCDBLKCTL register.
|
|
//! \param clockPrescalar is the clock pre-scalar for blinking frequency.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_512 [Default]
|
|
//! - \b LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_1024
|
|
//! - \b LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_2048
|
|
//! - \b LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_4096
|
|
//! - \b LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_8162
|
|
//! - \b LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_16384
|
|
//! - \b LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_32768
|
|
//! - \b LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_65536
|
|
//! \n Modified bits are \b LCDBLKPREx of \b LCDBLKCTL register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_setBlinkingControl(uint16_t baseAddress,
|
|
uint8_t clockDivider,
|
|
uint8_t clockPrescalar,
|
|
uint8_t mode);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Enables the charge pump.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//!
|
|
//! Modified bits are \b LCDCPEN of \b LCDVCTL register; bits \b LCDON of \b
|
|
//! LCDCTL0 register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_enableChargePump(uint16_t baseAddress);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Disables the charge pump.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//!
|
|
//! Modified bits are \b LCDCPEN of \b LCDVCTL register; bits \b LCDON of \b
|
|
//! LCDCTL0 register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_disableChargePump(uint16_t baseAddress);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Selects the bias level.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param bias is the select for bias level.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_BIAS_1_3 [Default] - 1/3 bias
|
|
//! - \b LCD_C_BIAS_1_2 - 1/2 bias
|
|
//!
|
|
//! Modified bits are \b LCD2B of \b LCDVCTL register; bits \b LCDON of \b
|
|
//! LCDCTL0 register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_selectBias(uint16_t baseAddress,
|
|
uint16_t bias);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Selects the charge pump reference.
|
|
//!
|
|
//! The charge pump reference does not support
|
|
//! LCD_C_EXTERNAL_REFERENCE_VOLTAGE,
|
|
//! LCD_C_INTERNAL_REFERENCE_VOLTAGE_SWITCHED_TO_EXTERNAL_PIN when
|
|
//! LCD_C_V2V3V4_SOURCED_EXTERNALLY or
|
|
//! LCD_C_V2V3V4_GENERATED_INTERNALLY_SWITCHED_TO_PINS is selected.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param reference is the select for charge pump reference.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_INTERNAL_REFERENCE_VOLTAGE [Default]
|
|
//! - \b LCD_C_EXTERNAL_REFERENCE_VOLTAGE
|
|
//! - \b LCD_C_INTERNAL_REFERENCE_VOLTAGE_SWITCHED_TO_EXTERNAL_PIN
|
|
//!
|
|
//! Modified bits are \b VLCDREFx of \b LCDVCTL register; bits \b LCDON of \b
|
|
//! LCDCTL0 register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_selectChargePumpReference(uint16_t baseAddress,
|
|
uint16_t reference);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Sets the voltage source for V2/V3/V4 and V5.
|
|
//!
|
|
//! The charge pump reference does not support
|
|
//! LCD_C_EXTERNAL_REFERENCE_VOLTAGE,
|
|
//! LCD_C_INTERNAL_REFERENCE_VOLTAGE_SWITCHED_TO_EXTERNAL_PIN when
|
|
//! LCD_C_V2V3V4_SOURCED_EXTERNALLY or
|
|
//! LCD_C_V2V3V4_GENERATED_INTERNALLY_SWITCHED_TO_PINS is selected.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param vlcdSource is the V(LCD) source select.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_VLCD_GENERATED_INTERNALLY [Default]
|
|
//! - \b LCD_C_VLCD_SOURCED_EXTERNALLY
|
|
//! \param v2v3v4Source is the V2/V3/V4 source select.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_V2V3V4_GENERATED_INTERNALLY_NOT_SWITCHED_TO_PINS
|
|
//! [Default]
|
|
//! - \b LCD_C_V2V3V4_GENERATED_INTERNALLY_SWITCHED_TO_PINS
|
|
//! - \b LCD_C_V2V3V4_SOURCED_EXTERNALLY
|
|
//! \param v5Source is the V5 source select.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_V5_VSS [Default]
|
|
//! - \b LCD_C_V5_SOURCED_FROM_R03
|
|
//!
|
|
//! Modified bits are \b VLCDEXT, \b LCDREXT, \b LCDEXTBIAS and \b R03EXT of \b
|
|
//! LCDVCTL register; bits \b LCDON of \b LCDCTL0 register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_setVLCDSource(uint16_t baseAddress,
|
|
uint16_t vlcdSource,
|
|
uint16_t v2v3v4Source,
|
|
uint16_t v5Source);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Selects the charge pump reference.
|
|
//!
|
|
//! Sets LCD charge pump voltage.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param voltage is the charge pump select.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_CHARGEPUMP_DISABLED [Default]
|
|
//! - \b LCD_C_CHARGEPUMP_VOLTAGE_2_60V_OR_2_17VREF
|
|
//! - \b LCD_C_CHARGEPUMP_VOLTAGE_2_66V_OR_2_22VREF
|
|
//! - \b LCD_C_CHARGEPUMP_VOLTAGE_2_72V_OR_2_27VREF
|
|
//! - \b LCD_C_CHARGEPUMP_VOLTAGE_2_78V_OR_2_32VREF
|
|
//! - \b LCD_C_CHARGEPUMP_VOLTAGE_2_84V_OR_2_37VREF
|
|
//! - \b LCD_C_CHARGEPUMP_VOLTAGE_2_90V_OR_2_42VREF
|
|
//! - \b LCD_C_CHARGEPUMP_VOLTAGE_2_96V_OR_2_47VREF
|
|
//! - \b LCD_C_CHARGEPUMP_VOLTAGE_3_02V_OR_2_52VREF
|
|
//! - \b LCD_C_CHARGEPUMP_VOLTAGE_3_08V_OR_2_57VREF
|
|
//! - \b LCD_C_CHARGEPUMP_VOLTAGE_3_14V_OR_2_62VREF
|
|
//! - \b LCD_C_CHARGEPUMP_VOLTAGE_3_20V_OR_2_67VREF
|
|
//! - \b LCD_C_CHARGEPUMP_VOLTAGE_3_26V_OR_2_72VREF
|
|
//! - \b LCD_C_CHARGEPUMP_VOLTAGE_3_32V_OR_2_77VREF
|
|
//! - \b LCD_C_CHARGEPUMP_VOLTAGE_3_38V_OR_2_82VREF
|
|
//! - \b LCD_C_CHARGEPUMP_VOLTAGE_3_44V_OR_2_87VREF
|
|
//!
|
|
//! Modified bits are \b VLCDx of \b LCDVCTL register; bits \b LCDON of \b
|
|
//! LCDCTL0 register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_setVLCDVoltage(uint16_t baseAddress,
|
|
uint16_t voltage);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Sets the LCD Pin as LCD functions.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param pin is the select pin set as LCD function.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_SEGMENT_LINE_0
|
|
//! - \b LCD_C_SEGMENT_LINE_1
|
|
//! - \b LCD_C_SEGMENT_LINE_2
|
|
//! - \b LCD_C_SEGMENT_LINE_3
|
|
//! - \b LCD_C_SEGMENT_LINE_4
|
|
//! - \b LCD_C_SEGMENT_LINE_5
|
|
//! - \b LCD_C_SEGMENT_LINE_6
|
|
//! - \b LCD_C_SEGMENT_LINE_7
|
|
//! - \b LCD_C_SEGMENT_LINE_8
|
|
//! - \b LCD_C_SEGMENT_LINE_9
|
|
//! - \b LCD_C_SEGMENT_LINE_10
|
|
//! - \b LCD_C_SEGMENT_LINE_11
|
|
//! - \b LCD_C_SEGMENT_LINE_12
|
|
//! - \b LCD_C_SEGMENT_LINE_13
|
|
//! - \b LCD_C_SEGMENT_LINE_14
|
|
//! - \b LCD_C_SEGMENT_LINE_15
|
|
//! - \b LCD_C_SEGMENT_LINE_16
|
|
//! - \b LCD_C_SEGMENT_LINE_17
|
|
//! - \b LCD_C_SEGMENT_LINE_18
|
|
//! - \b LCD_C_SEGMENT_LINE_19
|
|
//! - \b LCD_C_SEGMENT_LINE_20
|
|
//! - \b LCD_C_SEGMENT_LINE_21
|
|
//! - \b LCD_C_SEGMENT_LINE_22
|
|
//! - \b LCD_C_SEGMENT_LINE_23
|
|
//! - \b LCD_C_SEGMENT_LINE_24
|
|
//! - \b LCD_C_SEGMENT_LINE_25
|
|
//! - \b LCD_C_SEGMENT_LINE_26
|
|
//! - \b LCD_C_SEGMENT_LINE_27
|
|
//! - \b LCD_C_SEGMENT_LINE_28
|
|
//! - \b LCD_C_SEGMENT_LINE_29
|
|
//! - \b LCD_C_SEGMENT_LINE_30
|
|
//! - \b LCD_C_SEGMENT_LINE_31
|
|
//! - \b LCD_C_SEGMENT_LINE_32
|
|
//! - \b LCD_C_SEGMENT_LINE_33
|
|
//! - \b LCD_C_SEGMENT_LINE_34
|
|
//! - \b LCD_C_SEGMENT_LINE_35
|
|
//! - \b LCD_C_SEGMENT_LINE_36
|
|
//! - \b LCD_C_SEGMENT_LINE_37
|
|
//! - \b LCD_C_SEGMENT_LINE_38
|
|
//! - \b LCD_C_SEGMENT_LINE_39
|
|
//! - \b LCD_C_SEGMENT_LINE_40
|
|
//! - \b LCD_C_SEGMENT_LINE_41
|
|
//! - \b LCD_C_SEGMENT_LINE_42
|
|
//! - \b LCD_C_SEGMENT_LINE_43
|
|
//! - \b LCD_C_SEGMENT_LINE_44
|
|
//! - \b LCD_C_SEGMENT_LINE_45
|
|
//! - \b LCD_C_SEGMENT_LINE_46
|
|
//! - \b LCD_C_SEGMENT_LINE_47
|
|
//! - \b LCD_C_SEGMENT_LINE_48
|
|
//! - \b LCD_C_SEGMENT_LINE_49
|
|
//! - \b LCD_C_SEGMENT_LINE_50
|
|
//! - \b LCD_C_SEGMENT_LINE_51
|
|
//! - \b LCD_C_SEGMENT_LINE_52
|
|
//! - \b LCD_C_SEGMENT_LINE_53
|
|
//! - \b LCD_C_SEGMENT_LINE_54
|
|
//! - \b LCD_C_SEGMENT_LINE_55
|
|
//! - \b LCD_C_SEGMENT_LINE_56
|
|
//! - \b LCD_C_SEGMENT_LINE_57
|
|
//! - \b LCD_C_SEGMENT_LINE_58
|
|
//! - \b LCD_C_SEGMENT_LINE_59
|
|
//! - \b LCD_C_SEGMENT_LINE_60
|
|
//! - \b LCD_C_SEGMENT_LINE_61
|
|
//! - \b LCD_C_SEGMENT_LINE_62
|
|
//! - \b LCD_C_SEGMENT_LINE_63
|
|
//!
|
|
//! Modified bits are \b LCDSx of \b LCDPCTLx register; bits \b LCDON of \b
|
|
//! LCDCTL0 register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_setPinAsLCDFunction(uint16_t baseAddress,
|
|
uint8_t pin);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Sets the LCD Pin as Port functions.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param pin is the select pin set as Port function.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_SEGMENT_LINE_0
|
|
//! - \b LCD_C_SEGMENT_LINE_1
|
|
//! - \b LCD_C_SEGMENT_LINE_2
|
|
//! - \b LCD_C_SEGMENT_LINE_3
|
|
//! - \b LCD_C_SEGMENT_LINE_4
|
|
//! - \b LCD_C_SEGMENT_LINE_5
|
|
//! - \b LCD_C_SEGMENT_LINE_6
|
|
//! - \b LCD_C_SEGMENT_LINE_7
|
|
//! - \b LCD_C_SEGMENT_LINE_8
|
|
//! - \b LCD_C_SEGMENT_LINE_9
|
|
//! - \b LCD_C_SEGMENT_LINE_10
|
|
//! - \b LCD_C_SEGMENT_LINE_11
|
|
//! - \b LCD_C_SEGMENT_LINE_12
|
|
//! - \b LCD_C_SEGMENT_LINE_13
|
|
//! - \b LCD_C_SEGMENT_LINE_14
|
|
//! - \b LCD_C_SEGMENT_LINE_15
|
|
//! - \b LCD_C_SEGMENT_LINE_16
|
|
//! - \b LCD_C_SEGMENT_LINE_17
|
|
//! - \b LCD_C_SEGMENT_LINE_18
|
|
//! - \b LCD_C_SEGMENT_LINE_19
|
|
//! - \b LCD_C_SEGMENT_LINE_20
|
|
//! - \b LCD_C_SEGMENT_LINE_21
|
|
//! - \b LCD_C_SEGMENT_LINE_22
|
|
//! - \b LCD_C_SEGMENT_LINE_23
|
|
//! - \b LCD_C_SEGMENT_LINE_24
|
|
//! - \b LCD_C_SEGMENT_LINE_25
|
|
//! - \b LCD_C_SEGMENT_LINE_26
|
|
//! - \b LCD_C_SEGMENT_LINE_27
|
|
//! - \b LCD_C_SEGMENT_LINE_28
|
|
//! - \b LCD_C_SEGMENT_LINE_29
|
|
//! - \b LCD_C_SEGMENT_LINE_30
|
|
//! - \b LCD_C_SEGMENT_LINE_31
|
|
//! - \b LCD_C_SEGMENT_LINE_32
|
|
//! - \b LCD_C_SEGMENT_LINE_33
|
|
//! - \b LCD_C_SEGMENT_LINE_34
|
|
//! - \b LCD_C_SEGMENT_LINE_35
|
|
//! - \b LCD_C_SEGMENT_LINE_36
|
|
//! - \b LCD_C_SEGMENT_LINE_37
|
|
//! - \b LCD_C_SEGMENT_LINE_38
|
|
//! - \b LCD_C_SEGMENT_LINE_39
|
|
//! - \b LCD_C_SEGMENT_LINE_40
|
|
//! - \b LCD_C_SEGMENT_LINE_41
|
|
//! - \b LCD_C_SEGMENT_LINE_42
|
|
//! - \b LCD_C_SEGMENT_LINE_43
|
|
//! - \b LCD_C_SEGMENT_LINE_44
|
|
//! - \b LCD_C_SEGMENT_LINE_45
|
|
//! - \b LCD_C_SEGMENT_LINE_46
|
|
//! - \b LCD_C_SEGMENT_LINE_47
|
|
//! - \b LCD_C_SEGMENT_LINE_48
|
|
//! - \b LCD_C_SEGMENT_LINE_49
|
|
//! - \b LCD_C_SEGMENT_LINE_50
|
|
//! - \b LCD_C_SEGMENT_LINE_51
|
|
//! - \b LCD_C_SEGMENT_LINE_52
|
|
//! - \b LCD_C_SEGMENT_LINE_53
|
|
//! - \b LCD_C_SEGMENT_LINE_54
|
|
//! - \b LCD_C_SEGMENT_LINE_55
|
|
//! - \b LCD_C_SEGMENT_LINE_56
|
|
//! - \b LCD_C_SEGMENT_LINE_57
|
|
//! - \b LCD_C_SEGMENT_LINE_58
|
|
//! - \b LCD_C_SEGMENT_LINE_59
|
|
//! - \b LCD_C_SEGMENT_LINE_60
|
|
//! - \b LCD_C_SEGMENT_LINE_61
|
|
//! - \b LCD_C_SEGMENT_LINE_62
|
|
//! - \b LCD_C_SEGMENT_LINE_63
|
|
//!
|
|
//! Modified bits are \b LCDSx of \b LCDPCTLx register; bits \b LCDON of \b
|
|
//! LCDCTL0 register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_setPinAsPortFunction(uint16_t baseAddress,
|
|
uint8_t pin);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Sets the LCD pins as LCD function pin.
|
|
//!
|
|
//! This function sets the LCD pins as LCD function pin. Instead of passing the
|
|
//! all the possible pins, it just requires the start pin and the end pin.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param startPin is the starting pin to be configed as LCD function pin.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_SEGMENT_LINE_0
|
|
//! - \b LCD_C_SEGMENT_LINE_1
|
|
//! - \b LCD_C_SEGMENT_LINE_2
|
|
//! - \b LCD_C_SEGMENT_LINE_3
|
|
//! - \b LCD_C_SEGMENT_LINE_4
|
|
//! - \b LCD_C_SEGMENT_LINE_5
|
|
//! - \b LCD_C_SEGMENT_LINE_6
|
|
//! - \b LCD_C_SEGMENT_LINE_7
|
|
//! - \b LCD_C_SEGMENT_LINE_8
|
|
//! - \b LCD_C_SEGMENT_LINE_9
|
|
//! - \b LCD_C_SEGMENT_LINE_10
|
|
//! - \b LCD_C_SEGMENT_LINE_11
|
|
//! - \b LCD_C_SEGMENT_LINE_12
|
|
//! - \b LCD_C_SEGMENT_LINE_13
|
|
//! - \b LCD_C_SEGMENT_LINE_14
|
|
//! - \b LCD_C_SEGMENT_LINE_15
|
|
//! - \b LCD_C_SEGMENT_LINE_16
|
|
//! - \b LCD_C_SEGMENT_LINE_17
|
|
//! - \b LCD_C_SEGMENT_LINE_18
|
|
//! - \b LCD_C_SEGMENT_LINE_19
|
|
//! - \b LCD_C_SEGMENT_LINE_20
|
|
//! - \b LCD_C_SEGMENT_LINE_21
|
|
//! - \b LCD_C_SEGMENT_LINE_22
|
|
//! - \b LCD_C_SEGMENT_LINE_23
|
|
//! - \b LCD_C_SEGMENT_LINE_24
|
|
//! - \b LCD_C_SEGMENT_LINE_25
|
|
//! - \b LCD_C_SEGMENT_LINE_26
|
|
//! - \b LCD_C_SEGMENT_LINE_27
|
|
//! - \b LCD_C_SEGMENT_LINE_28
|
|
//! - \b LCD_C_SEGMENT_LINE_29
|
|
//! - \b LCD_C_SEGMENT_LINE_30
|
|
//! - \b LCD_C_SEGMENT_LINE_31
|
|
//! - \b LCD_C_SEGMENT_LINE_32
|
|
//! - \b LCD_C_SEGMENT_LINE_33
|
|
//! - \b LCD_C_SEGMENT_LINE_34
|
|
//! - \b LCD_C_SEGMENT_LINE_35
|
|
//! - \b LCD_C_SEGMENT_LINE_36
|
|
//! - \b LCD_C_SEGMENT_LINE_37
|
|
//! - \b LCD_C_SEGMENT_LINE_38
|
|
//! - \b LCD_C_SEGMENT_LINE_39
|
|
//! - \b LCD_C_SEGMENT_LINE_40
|
|
//! - \b LCD_C_SEGMENT_LINE_41
|
|
//! - \b LCD_C_SEGMENT_LINE_42
|
|
//! - \b LCD_C_SEGMENT_LINE_43
|
|
//! - \b LCD_C_SEGMENT_LINE_44
|
|
//! - \b LCD_C_SEGMENT_LINE_45
|
|
//! - \b LCD_C_SEGMENT_LINE_46
|
|
//! - \b LCD_C_SEGMENT_LINE_47
|
|
//! - \b LCD_C_SEGMENT_LINE_48
|
|
//! - \b LCD_C_SEGMENT_LINE_49
|
|
//! - \b LCD_C_SEGMENT_LINE_50
|
|
//! - \b LCD_C_SEGMENT_LINE_51
|
|
//! - \b LCD_C_SEGMENT_LINE_52
|
|
//! - \b LCD_C_SEGMENT_LINE_53
|
|
//! - \b LCD_C_SEGMENT_LINE_54
|
|
//! - \b LCD_C_SEGMENT_LINE_55
|
|
//! - \b LCD_C_SEGMENT_LINE_56
|
|
//! - \b LCD_C_SEGMENT_LINE_57
|
|
//! - \b LCD_C_SEGMENT_LINE_58
|
|
//! - \b LCD_C_SEGMENT_LINE_59
|
|
//! - \b LCD_C_SEGMENT_LINE_60
|
|
//! - \b LCD_C_SEGMENT_LINE_61
|
|
//! - \b LCD_C_SEGMENT_LINE_62
|
|
//! - \b LCD_C_SEGMENT_LINE_63
|
|
//! \param endPin is the ending pin to be configed as LCD function pin.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_SEGMENT_LINE_0
|
|
//! - \b LCD_C_SEGMENT_LINE_1
|
|
//! - \b LCD_C_SEGMENT_LINE_2
|
|
//! - \b LCD_C_SEGMENT_LINE_3
|
|
//! - \b LCD_C_SEGMENT_LINE_4
|
|
//! - \b LCD_C_SEGMENT_LINE_5
|
|
//! - \b LCD_C_SEGMENT_LINE_6
|
|
//! - \b LCD_C_SEGMENT_LINE_7
|
|
//! - \b LCD_C_SEGMENT_LINE_8
|
|
//! - \b LCD_C_SEGMENT_LINE_9
|
|
//! - \b LCD_C_SEGMENT_LINE_10
|
|
//! - \b LCD_C_SEGMENT_LINE_11
|
|
//! - \b LCD_C_SEGMENT_LINE_12
|
|
//! - \b LCD_C_SEGMENT_LINE_13
|
|
//! - \b LCD_C_SEGMENT_LINE_14
|
|
//! - \b LCD_C_SEGMENT_LINE_15
|
|
//! - \b LCD_C_SEGMENT_LINE_16
|
|
//! - \b LCD_C_SEGMENT_LINE_17
|
|
//! - \b LCD_C_SEGMENT_LINE_18
|
|
//! - \b LCD_C_SEGMENT_LINE_19
|
|
//! - \b LCD_C_SEGMENT_LINE_20
|
|
//! - \b LCD_C_SEGMENT_LINE_21
|
|
//! - \b LCD_C_SEGMENT_LINE_22
|
|
//! - \b LCD_C_SEGMENT_LINE_23
|
|
//! - \b LCD_C_SEGMENT_LINE_24
|
|
//! - \b LCD_C_SEGMENT_LINE_25
|
|
//! - \b LCD_C_SEGMENT_LINE_26
|
|
//! - \b LCD_C_SEGMENT_LINE_27
|
|
//! - \b LCD_C_SEGMENT_LINE_28
|
|
//! - \b LCD_C_SEGMENT_LINE_29
|
|
//! - \b LCD_C_SEGMENT_LINE_30
|
|
//! - \b LCD_C_SEGMENT_LINE_31
|
|
//! - \b LCD_C_SEGMENT_LINE_32
|
|
//! - \b LCD_C_SEGMENT_LINE_33
|
|
//! - \b LCD_C_SEGMENT_LINE_34
|
|
//! - \b LCD_C_SEGMENT_LINE_35
|
|
//! - \b LCD_C_SEGMENT_LINE_36
|
|
//! - \b LCD_C_SEGMENT_LINE_37
|
|
//! - \b LCD_C_SEGMENT_LINE_38
|
|
//! - \b LCD_C_SEGMENT_LINE_39
|
|
//! - \b LCD_C_SEGMENT_LINE_40
|
|
//! - \b LCD_C_SEGMENT_LINE_41
|
|
//! - \b LCD_C_SEGMENT_LINE_42
|
|
//! - \b LCD_C_SEGMENT_LINE_43
|
|
//! - \b LCD_C_SEGMENT_LINE_44
|
|
//! - \b LCD_C_SEGMENT_LINE_45
|
|
//! - \b LCD_C_SEGMENT_LINE_46
|
|
//! - \b LCD_C_SEGMENT_LINE_47
|
|
//! - \b LCD_C_SEGMENT_LINE_48
|
|
//! - \b LCD_C_SEGMENT_LINE_49
|
|
//! - \b LCD_C_SEGMENT_LINE_50
|
|
//! - \b LCD_C_SEGMENT_LINE_51
|
|
//! - \b LCD_C_SEGMENT_LINE_52
|
|
//! - \b LCD_C_SEGMENT_LINE_53
|
|
//! - \b LCD_C_SEGMENT_LINE_54
|
|
//! - \b LCD_C_SEGMENT_LINE_55
|
|
//! - \b LCD_C_SEGMENT_LINE_56
|
|
//! - \b LCD_C_SEGMENT_LINE_57
|
|
//! - \b LCD_C_SEGMENT_LINE_58
|
|
//! - \b LCD_C_SEGMENT_LINE_59
|
|
//! - \b LCD_C_SEGMENT_LINE_60
|
|
//! - \b LCD_C_SEGMENT_LINE_61
|
|
//! - \b LCD_C_SEGMENT_LINE_62
|
|
//! - \b LCD_C_SEGMENT_LINE_63
|
|
//!
|
|
//! Modified bits are \b LCDSx of \b LCDPCTLx register; bits \b LCDON of \b
|
|
//! LCDCTL0 register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_setPinAsLCDFunctionEx(uint16_t baseAddress,
|
|
uint8_t startPin,
|
|
uint8_t endPin);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Sets the LCD memory register.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param pin is the select pin for setting value.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_SEGMENT_LINE_0
|
|
//! - \b LCD_C_SEGMENT_LINE_1
|
|
//! - \b LCD_C_SEGMENT_LINE_2
|
|
//! - \b LCD_C_SEGMENT_LINE_3
|
|
//! - \b LCD_C_SEGMENT_LINE_4
|
|
//! - \b LCD_C_SEGMENT_LINE_5
|
|
//! - \b LCD_C_SEGMENT_LINE_6
|
|
//! - \b LCD_C_SEGMENT_LINE_7
|
|
//! - \b LCD_C_SEGMENT_LINE_8
|
|
//! - \b LCD_C_SEGMENT_LINE_9
|
|
//! - \b LCD_C_SEGMENT_LINE_10
|
|
//! - \b LCD_C_SEGMENT_LINE_11
|
|
//! - \b LCD_C_SEGMENT_LINE_12
|
|
//! - \b LCD_C_SEGMENT_LINE_13
|
|
//! - \b LCD_C_SEGMENT_LINE_14
|
|
//! - \b LCD_C_SEGMENT_LINE_15
|
|
//! - \b LCD_C_SEGMENT_LINE_16
|
|
//! - \b LCD_C_SEGMENT_LINE_17
|
|
//! - \b LCD_C_SEGMENT_LINE_18
|
|
//! - \b LCD_C_SEGMENT_LINE_19
|
|
//! - \b LCD_C_SEGMENT_LINE_20
|
|
//! - \b LCD_C_SEGMENT_LINE_21
|
|
//! - \b LCD_C_SEGMENT_LINE_22
|
|
//! - \b LCD_C_SEGMENT_LINE_23
|
|
//! - \b LCD_C_SEGMENT_LINE_24
|
|
//! - \b LCD_C_SEGMENT_LINE_25
|
|
//! - \b LCD_C_SEGMENT_LINE_26
|
|
//! - \b LCD_C_SEGMENT_LINE_27
|
|
//! - \b LCD_C_SEGMENT_LINE_28
|
|
//! - \b LCD_C_SEGMENT_LINE_29
|
|
//! - \b LCD_C_SEGMENT_LINE_30
|
|
//! - \b LCD_C_SEGMENT_LINE_31
|
|
//! - \b LCD_C_SEGMENT_LINE_32
|
|
//! - \b LCD_C_SEGMENT_LINE_33
|
|
//! - \b LCD_C_SEGMENT_LINE_34
|
|
//! - \b LCD_C_SEGMENT_LINE_35
|
|
//! - \b LCD_C_SEGMENT_LINE_36
|
|
//! - \b LCD_C_SEGMENT_LINE_37
|
|
//! - \b LCD_C_SEGMENT_LINE_38
|
|
//! - \b LCD_C_SEGMENT_LINE_39
|
|
//! - \b LCD_C_SEGMENT_LINE_40
|
|
//! - \b LCD_C_SEGMENT_LINE_41
|
|
//! - \b LCD_C_SEGMENT_LINE_42
|
|
//! - \b LCD_C_SEGMENT_LINE_43
|
|
//! - \b LCD_C_SEGMENT_LINE_44
|
|
//! - \b LCD_C_SEGMENT_LINE_45
|
|
//! - \b LCD_C_SEGMENT_LINE_46
|
|
//! - \b LCD_C_SEGMENT_LINE_47
|
|
//! - \b LCD_C_SEGMENT_LINE_48
|
|
//! - \b LCD_C_SEGMENT_LINE_49
|
|
//! - \b LCD_C_SEGMENT_LINE_50
|
|
//! - \b LCD_C_SEGMENT_LINE_51
|
|
//! - \b LCD_C_SEGMENT_LINE_52
|
|
//! - \b LCD_C_SEGMENT_LINE_53
|
|
//! - \b LCD_C_SEGMENT_LINE_54
|
|
//! - \b LCD_C_SEGMENT_LINE_55
|
|
//! - \b LCD_C_SEGMENT_LINE_56
|
|
//! - \b LCD_C_SEGMENT_LINE_57
|
|
//! - \b LCD_C_SEGMENT_LINE_58
|
|
//! - \b LCD_C_SEGMENT_LINE_59
|
|
//! - \b LCD_C_SEGMENT_LINE_60
|
|
//! - \b LCD_C_SEGMENT_LINE_61
|
|
//! - \b LCD_C_SEGMENT_LINE_62
|
|
//! - \b LCD_C_SEGMENT_LINE_63
|
|
//! \param value is the designated value for corresponding pin.
|
|
//!
|
|
//! Modified bits are \b MBITx of \b LCDMx register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_setMemory(uint16_t baseAddress,
|
|
uint8_t pin,
|
|
uint8_t value);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Sets the LCD blink memory register.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param pin is the select pin for setting value.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_SEGMENT_LINE_0
|
|
//! - \b LCD_C_SEGMENT_LINE_1
|
|
//! - \b LCD_C_SEGMENT_LINE_2
|
|
//! - \b LCD_C_SEGMENT_LINE_3
|
|
//! - \b LCD_C_SEGMENT_LINE_4
|
|
//! - \b LCD_C_SEGMENT_LINE_5
|
|
//! - \b LCD_C_SEGMENT_LINE_6
|
|
//! - \b LCD_C_SEGMENT_LINE_7
|
|
//! - \b LCD_C_SEGMENT_LINE_8
|
|
//! - \b LCD_C_SEGMENT_LINE_9
|
|
//! - \b LCD_C_SEGMENT_LINE_10
|
|
//! - \b LCD_C_SEGMENT_LINE_11
|
|
//! - \b LCD_C_SEGMENT_LINE_12
|
|
//! - \b LCD_C_SEGMENT_LINE_13
|
|
//! - \b LCD_C_SEGMENT_LINE_14
|
|
//! - \b LCD_C_SEGMENT_LINE_15
|
|
//! - \b LCD_C_SEGMENT_LINE_16
|
|
//! - \b LCD_C_SEGMENT_LINE_17
|
|
//! - \b LCD_C_SEGMENT_LINE_18
|
|
//! - \b LCD_C_SEGMENT_LINE_19
|
|
//! - \b LCD_C_SEGMENT_LINE_20
|
|
//! - \b LCD_C_SEGMENT_LINE_21
|
|
//! - \b LCD_C_SEGMENT_LINE_22
|
|
//! - \b LCD_C_SEGMENT_LINE_23
|
|
//! - \b LCD_C_SEGMENT_LINE_24
|
|
//! - \b LCD_C_SEGMENT_LINE_25
|
|
//! - \b LCD_C_SEGMENT_LINE_26
|
|
//! - \b LCD_C_SEGMENT_LINE_27
|
|
//! - \b LCD_C_SEGMENT_LINE_28
|
|
//! - \b LCD_C_SEGMENT_LINE_29
|
|
//! - \b LCD_C_SEGMENT_LINE_30
|
|
//! - \b LCD_C_SEGMENT_LINE_31
|
|
//! - \b LCD_C_SEGMENT_LINE_32
|
|
//! - \b LCD_C_SEGMENT_LINE_33
|
|
//! - \b LCD_C_SEGMENT_LINE_34
|
|
//! - \b LCD_C_SEGMENT_LINE_35
|
|
//! - \b LCD_C_SEGMENT_LINE_36
|
|
//! - \b LCD_C_SEGMENT_LINE_37
|
|
//! - \b LCD_C_SEGMENT_LINE_38
|
|
//! - \b LCD_C_SEGMENT_LINE_39
|
|
//! - \b LCD_C_SEGMENT_LINE_40
|
|
//! - \b LCD_C_SEGMENT_LINE_41
|
|
//! - \b LCD_C_SEGMENT_LINE_42
|
|
//! - \b LCD_C_SEGMENT_LINE_43
|
|
//! - \b LCD_C_SEGMENT_LINE_44
|
|
//! - \b LCD_C_SEGMENT_LINE_45
|
|
//! - \b LCD_C_SEGMENT_LINE_46
|
|
//! - \b LCD_C_SEGMENT_LINE_47
|
|
//! - \b LCD_C_SEGMENT_LINE_48
|
|
//! - \b LCD_C_SEGMENT_LINE_49
|
|
//! - \b LCD_C_SEGMENT_LINE_50
|
|
//! - \b LCD_C_SEGMENT_LINE_51
|
|
//! - \b LCD_C_SEGMENT_LINE_52
|
|
//! - \b LCD_C_SEGMENT_LINE_53
|
|
//! - \b LCD_C_SEGMENT_LINE_54
|
|
//! - \b LCD_C_SEGMENT_LINE_55
|
|
//! - \b LCD_C_SEGMENT_LINE_56
|
|
//! - \b LCD_C_SEGMENT_LINE_57
|
|
//! - \b LCD_C_SEGMENT_LINE_58
|
|
//! - \b LCD_C_SEGMENT_LINE_59
|
|
//! - \b LCD_C_SEGMENT_LINE_60
|
|
//! - \b LCD_C_SEGMENT_LINE_61
|
|
//! - \b LCD_C_SEGMENT_LINE_62
|
|
//! - \b LCD_C_SEGMENT_LINE_63
|
|
//! \param value is the designated value for corresponding blink pin.
|
|
//!
|
|
//! Modified bits are \b MBITx of \b LCDBMx register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_setBlinkingMemory(uint16_t baseAddress,
|
|
uint8_t pin,
|
|
uint8_t value);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \brief Configs the charge pump for synchronization and disabled capability.
|
|
//!
|
|
//! This function is device-specific. The charge pump clock can be synchronized
|
|
//! to a device-specific clock, and also can be disabled by connected function.
|
|
//!
|
|
//! \param baseAddress is the base address of the LCD_C module.
|
|
//! \param syncToClock is the synchronization select.
|
|
//! Valid values are:
|
|
//! - \b LCD_C_SYNCHRONIZATION_DISABLED [Default]
|
|
//! - \b LCD_C_SYNCHRONIZATION_ENABLED
|
|
//! \param functionControl is the connected function control select. Setting 0
|
|
//! to make connected function not disable charge pump.
|
|
//!
|
|
//! Modified bits are \b MBITx of \b LCDBMx register.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
extern void LCD_C_configChargePump(uint16_t baseAddress,
|
|
uint16_t syncToClock,
|
|
uint16_t functionControl);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Mark the end of the C bindings section for C++ compilers.
|
|
//
|
|
//*****************************************************************************
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif
|
|
#endif // __MSP430WARE_LCD_C_H__
|