mirror of
https://github.com/FreeRTOS/FreeRTOS-Kernel.git
synced 2025-12-08 20:55:14 -05:00
1509e4f742
Add a hardware definition project for the MicroZed board to the existing Zynq ZC702 project. Add a text file that describes how to switch the Zynq project form the ZC702 hardware to the MicroZed hardware.
31 lines
1.5 KiB
Text
31 lines
1.5 KiB
Text
The Zynq project is provided pre-configured to run on the ZC702 hardware. This
|
|
file describes how to run the project on the MicroZed.
|
|
|
|
1) Import the projects as described on the documentation page linked to by
|
|
the Instructions_Readme file, but importing all four projects rather than the
|
|
three described in the instructions. The forth project is MicroZed_hw_platform.
|
|
|
|
2) Select "File->New-Board Support Package" XSDK (Eclipse) IDE's File menu. In
|
|
the pop up window, call the BSP project MicroZed_bsp, save the bsp in a convenient
|
|
location, IMPORTANTLY ensure MicroZed_hw_platform is selected as the hardware
|
|
platform and standalone is selected as the bsp type. Then click Finish to close
|
|
the pop up window. The board support package settings window can then also be
|
|
closed without any changes from the default values.
|
|
|
|
3) Right click the RTOSDemo project in the XSDK's project explorer window and
|
|
select "Change referenced BSP" from the pop up window. Select MicroZed_bsp as
|
|
the referenced BSP.
|
|
|
|
4) Change the definition of partstLED_OUTPUT from 10 to 47 in
|
|
RTOSDemo/src/ParTest.c - that changes the output used to toggle the LED to be
|
|
correct for the MicroZed hardware.
|
|
|
|
5) Select Clean and then from the XSDK's project menu.
|
|
|
|
6) Right click the RTOSDemo project again, and select Refresh from the pop up
|
|
menu, before finally right clicking the project one final time and clicking
|
|
Build.
|
|
|
|
7) Select MicroZed_hw_platform as the hardware platform in the "Target Setup"
|
|
tab of the debug configuration.
|
|
|