FreeRTOS-Kernel/FreeRTOS/Demo/PPC440_Xilinx_Virtex5_GCC/RTOSDemo/partest/partest.c
Kody Stribrny 7d09b88e5a
Fix C source and header file license spacing (#1155)
The line 'Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.'
used to have two spaces between the first and second sentences.
This would cause the header check to fail due to the copyright regex located
ab999f9624/.github/scripts/core_checker.py (L396)
2024-01-12 16:43:31 -08:00

145 lines
4.3 KiB
C

/*
* FreeRTOS V202212.00
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
/* Scheduler includes. */
#include "FreeRTOS.h"
/* Demo application includes. */
#include "partest.h"
/* Library includes. */
#include "xparameters.h"
#include "xgpio_l.h"
/* Misc hardware specific definitions. */
#define partstALL_AS_OUTPUT 0x00
#define partstCHANNEL_1 0x01
#define partstMAX_8BIT_LED 0x07
/* The outputs are split into two IO sections, these variables maintain the
current value of either section. */
static unsigned portBASE_TYPE uxCurrentOutput8Bit, uxCurrentOutput5Bit;
/*-----------------------------------------------------------*/
/*
* Setup the IO for the LED outputs.
*/
void vParTestInitialise( void )
{
/* Set both sets of LED's on the demo board to outputs. */
XGpio_mSetDataDirection( XPAR_LEDS_8BIT_BASEADDR, partstCHANNEL_1, partstALL_AS_OUTPUT );
XGpio_mSetDataDirection( XPAR_LEDS_POSITIONS_BASEADDR, partstCHANNEL_1, partstALL_AS_OUTPUT );
/* Start with all outputs off. */
uxCurrentOutput8Bit = 0;
XGpio_mSetDataReg( XPAR_LEDS_8BIT_BASEADDR, partstCHANNEL_1, 0x00 );
uxCurrentOutput5Bit = 0;
XGpio_mSetDataReg( XPAR_LEDS_POSITIONS_BASEADDR, partstCHANNEL_1, 0x00 );
}
/*-----------------------------------------------------------*/
void vParTestSetLED( unsigned portBASE_TYPE uxLED, signed portBASE_TYPE xValue )
{
unsigned portBASE_TYPE uxBaseAddress, *puxCurrentValue;
portENTER_CRITICAL();
{
/* Which IO section does the LED being set/cleared belong to? The
8 bit or 5 bit outputs? */
if( uxLED <= partstMAX_8BIT_LED )
{
uxBaseAddress = XPAR_LEDS_8BIT_BASEADDR;
puxCurrentValue = &uxCurrentOutput5Bit;
}
else
{
uxBaseAddress = XPAR_LEDS_POSITIONS_BASEADDR;
puxCurrentValue = &uxCurrentOutput8Bit;
uxLED -= partstMAX_8BIT_LED;
}
/* Setup the bit mask accordingly. */
uxLED = 0x01 << uxLED;
/* Maintain the current output value. */
if( xValue )
{
*puxCurrentValue |= uxLED;
}
else
{
*puxCurrentValue &= ~uxLED;
}
/* Write the value to the port. */
XGpio_mSetDataReg( uxBaseAddress, partstCHANNEL_1, *puxCurrentValue );
}
portEXIT_CRITICAL();
}
/*-----------------------------------------------------------*/
void vParTestToggleLED( unsigned portBASE_TYPE uxLED )
{
unsigned portBASE_TYPE uxBaseAddress, *puxCurrentValue;
portENTER_CRITICAL();
{
/* Which IO section does the LED being toggled belong to? The
8 bit or 5 bit outputs? */
if( uxLED <= partstMAX_8BIT_LED )
{
uxBaseAddress = XPAR_LEDS_8BIT_BASEADDR;
puxCurrentValue = &uxCurrentOutput5Bit;
}
else
{
uxBaseAddress = XPAR_LEDS_POSITIONS_BASEADDR;
puxCurrentValue = &uxCurrentOutput8Bit;
uxLED -= partstMAX_8BIT_LED;
}
/* Setup the bit mask accordingly. */
uxLED = 0x01 << uxLED;
/* Maintain the current output value. */
if( *puxCurrentValue & uxLED )
{
*puxCurrentValue &= ~uxLED;
}
else
{
*puxCurrentValue |= uxLED;
}
/* Write the value to the port. */
XGpio_mSetDataReg(uxBaseAddress, partstCHANNEL_1, *puxCurrentValue );
}
portEXIT_CRITICAL();
}