FreeRTOS-Kernel/Demo/MicroBlaze_Spartan-6_SP605/RTOSDemo.mhs

# ##############################################################################
# Created by Base System Builder Wizard for Xilinx EDK 13.1 Build EDK_O.40d
# Mon May 30 16:46:06 2011
# Target Board:  xilinx.com sp605 Rev C
# Family:    spartan6
# Device:    xc6slx45t
# Package:   fgg484
# Speed Grade:  -3
# ##############################################################################
 PARAMETER VERSION = 2.1.0


 PORT RESET = RESET, DIR = I, SIGIS = RST, RST_POLARITY = 1
 PORT CLK_P = CLK, DIR = I, DIFFERENTIAL_POLARITY = P, SIGIS = CLK, CLK_FREQ = 200000000
 PORT CLK_N = CLK, DIR = I, DIFFERENTIAL_POLARITY = N, SIGIS = CLK, CLK_FREQ = 200000000
 PORT RS232_Uart_1_sout = RS232_Uart_1_sout, DIR = O
 PORT RS232_Uart_1_sin = RS232_Uart_1_sin, DIR = I
 PORT LEDs_4Bits_TRI_O = LEDs_4Bits_TRI_O, DIR = O, VEC = [0:3]
 PORT Push_Buttons_4Bits_TRI_I = Push_Buttons_4Bits_TRI_I, DIR = I, VEC = [0:3]
 PORT Ethernet_Lite_MDIO = Ethernet_Lite_MDIO, DIR = IO
 PORT Ethernet_Lite_MDC = Ethernet_Lite_MDC, DIR = O
 PORT Ethernet_Lite_TXD = Ethernet_Lite_TXD, DIR = O, VEC = [3:0]
 PORT Ethernet_Lite_TX_EN = Ethernet_Lite_TX_EN, DIR = O
 PORT Ethernet_Lite_TX_CLK = Ethernet_Lite_TX_CLK, DIR = I
 PORT Ethernet_Lite_COL = Ethernet_Lite_COL, DIR = I
 PORT Ethernet_Lite_RXD = Ethernet_Lite_RXD, DIR = I, VEC = [3:0]
 PORT Ethernet_Lite_RX_ER = Ethernet_Lite_RX_ER, DIR = I
 PORT Ethernet_Lite_RX_CLK = Ethernet_Lite_RX_CLK, DIR = I
 PORT Ethernet_Lite_CRS = Ethernet_Lite_CRS, DIR = I
 PORT Ethernet_Lite_RX_DV = Ethernet_Lite_RX_DV, DIR = I
 PORT Ethernet_Lite_PHY_RST_N = Ethernet_Lite_PHY_RST_N, DIR = O


BEGIN axi_interconnect
 PARAMETER INSTANCE = axi4_0
 PARAMETER HW_VER = 1.02.a
 PORT interconnect_aclk = clk_100_0000MHzPLL0
 PORT INTERCONNECT_ARESETN = proc_sys_reset_0_Interconnect_aresetn
END

BEGIN axi_interconnect
 PARAMETER INSTANCE = axi4lite_0
 PARAMETER HW_VER = 1.02.a
 PARAMETER C_INTERCONNECT_CONNECTIVITY_MODE = 0
 PORT INTERCONNECT_ARESETN = proc_sys_reset_0_Interconnect_aresetn
 PORT INTERCONNECT_ACLK = clk_50_0000MHzPLL0
END

BEGIN microblaze
 PARAMETER INSTANCE = microblaze_0
 PARAMETER HW_VER = 8.10.a
 PARAMETER C_INTERCONNECT = 2
 PARAMETER C_USE_BARREL = 1
 PARAMETER C_USE_FPU = 1
 PARAMETER C_DEBUG_ENABLED = 1
 PARAMETER C_ICACHE_BASEADDR = 0xc0000000
 PARAMETER C_ICACHE_HIGHADDR = 0xcfffffff
 PARAMETER C_USE_ICACHE = 1
 PARAMETER C_ICACHE_ALWAYS_USED = 1
 PARAMETER C_DCACHE_BASEADDR = 0xc0000000
 PARAMETER C_DCACHE_HIGHADDR = 0xcfffffff
 PARAMETER C_USE_DCACHE = 1
 PARAMETER C_DCACHE_ALWAYS_USED = 1
 PARAMETER C_INTERCONNECT_M_AXI_DC_AW_REGISTER = 1
 PARAMETER C_INTERCONNECT_M_AXI_DC_W_REGISTER = 1
 PARAMETER C_INTERCONNECT_M_AXI_DP_AW_REGISTER = 1
 PARAMETER C_INTERCONNECT_M_AXI_DP_AR_REGISTER = 1
 PARAMETER C_INTERCONNECT_M_AXI_DP_W_REGISTER = 1
 PARAMETER C_INTERCONNECT_M_AXI_DP_R_REGISTER = 1
 PARAMETER C_INTERCONNECT_M_AXI_DP_B_REGISTER = 1
 PARAMETER C_INTERCONNECT_M_AXI_DC_AR_REGISTER = 1
 PARAMETER C_INTERCONNECT_M_AXI_DC_R_REGISTER = 1
 PARAMETER C_INTERCONNECT_M_AXI_DC_B_REGISTER = 1
 PARAMETER C_INTERCONNECT_M_AXI_IC_AW_REGISTER = 1
 PARAMETER C_INTERCONNECT_M_AXI_IC_AR_REGISTER = 1
 PARAMETER C_INTERCONNECT_M_AXI_IC_W_REGISTER = 1
 PARAMETER C_INTERCONNECT_M_AXI_IC_R_REGISTER = 1
 PARAMETER C_INTERCONNECT_M_AXI_IC_B_REGISTER = 1
 BUS_INTERFACE ILMB = microblaze_0_ilmb
 BUS_INTERFACE DLMB = microblaze_0_dlmb
 BUS_INTERFACE M_AXI_DP = axi4lite_0
 BUS_INTERFACE M_AXI_DC = axi4_0
 BUS_INTERFACE M_AXI_IC = axi4_0
 BUS_INTERFACE DEBUG = microblaze_0_debug
 PORT MB_RESET = proc_sys_reset_0_MB_Reset
 PORT CLK = clk_100_0000MHzPLL0
 PORT INTERRUPT = microblaze_0_interrupt
END

BEGIN lmb_v10
 PARAMETER INSTANCE = microblaze_0_ilmb
 PARAMETER HW_VER = 2.00.a
 PORT SYS_RST = proc_sys_reset_0_BUS_STRUCT_RESET
 PORT LMB_CLK = clk_100_0000MHzPLL0
END

BEGIN lmb_v10
 PARAMETER INSTANCE = microblaze_0_dlmb
 PARAMETER HW_VER = 2.00.a
 PORT SYS_RST = proc_sys_reset_0_BUS_STRUCT_RESET
 PORT LMB_CLK = clk_100_0000MHzPLL0
END

BEGIN lmb_bram_if_cntlr
 PARAMETER INSTANCE = microblaze_0_i_bram_ctrl
 PARAMETER HW_VER = 3.00.a
 PARAMETER C_BASEADDR = 0x00000000
 PARAMETER C_HIGHADDR = 0x00001fff
 BUS_INTERFACE SLMB = microblaze_0_ilmb
 BUS_INTERFACE BRAM_PORT = microblaze_0_i_bram_ctrl_2_microblaze_0_bram_block
END

BEGIN lmb_bram_if_cntlr
 PARAMETER INSTANCE = microblaze_0_d_bram_ctrl
 PARAMETER HW_VER = 3.00.a
 PARAMETER C_BASEADDR = 0x00000000
 PARAMETER C_HIGHADDR = 0x00001fff
 BUS_INTERFACE SLMB = microblaze_0_dlmb
 BUS_INTERFACE BRAM_PORT = microblaze_0_d_bram_ctrl_2_microblaze_0_bram_block
END

BEGIN bram_block
 PARAMETER INSTANCE = microblaze_0_bram_block
 PARAMETER HW_VER = 1.00.a
 BUS_INTERFACE PORTA = microblaze_0_i_bram_ctrl_2_microblaze_0_bram_block
 BUS_INTERFACE PORTB = microblaze_0_d_bram_ctrl_2_microblaze_0_bram_block
END

BEGIN proc_sys_reset
 PARAMETER INSTANCE = proc_sys_reset_0
 PARAMETER HW_VER = 3.00.a
 PARAMETER C_EXT_RESET_HIGH = 1
 PORT Ext_Reset_In = RESET
 PORT MB_Reset = proc_sys_reset_0_MB_Reset
 PORT Slowest_sync_clk = clk_50_0000MHzPLL0
 PORT Interconnect_aresetn = proc_sys_reset_0_Interconnect_aresetn
 PORT Dcm_locked = proc_sys_reset_0_Dcm_locked
 PORT MB_Debug_Sys_Rst = proc_sys_reset_0_MB_Debug_Sys_Rst
 PORT BUS_STRUCT_RESET = proc_sys_reset_0_BUS_STRUCT_RESET
END

BEGIN clock_generator
 PARAMETER INSTANCE = clock_generator_0
 PARAMETER HW_VER = 4.01.a
 PARAMETER C_CLKIN_FREQ = 200000000
 PARAMETER C_CLKOUT0_FREQ = 600000000
 PARAMETER C_CLKOUT0_GROUP = PLL0
 PARAMETER C_CLKOUT0_BUF = FALSE
 PARAMETER C_CLKOUT1_FREQ = 600000000
 PARAMETER C_CLKOUT1_PHASE = 180
 PARAMETER C_CLKOUT1_GROUP = PLL0
 PARAMETER C_CLKOUT1_BUF = FALSE
 PARAMETER C_CLKOUT2_FREQ = 100000000
 PARAMETER C_CLKOUT2_GROUP = PLL0
 PARAMETER C_CLKOUT3_FREQ = 50000000
 PARAMETER C_CLKOUT3_GROUP = PLL0
 PORT RST = RESET
 PORT CLKIN = CLK
 PORT CLKOUT2 = clk_100_0000MHzPLL0
 PORT CLKOUT3 = clk_50_0000MHzPLL0
 PORT LOCKED = proc_sys_reset_0_Dcm_locked
END

BEGIN mdm
 PARAMETER INSTANCE = debug_module
 PARAMETER HW_VER = 2.00.b
 PARAMETER C_INTERCONNECT = 2
 PARAMETER C_USE_UART = 1
 PARAMETER C_INTERCONNECT_S_AXI_AW_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_AR_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_W_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_R_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_B_REGISTER = 1
 PARAMETER C_BASEADDR = 0x74800000
 PARAMETER C_HIGHADDR = 0x7480ffff
 BUS_INTERFACE S_AXI = axi4lite_0
 BUS_INTERFACE MBDEBUG_0 = microblaze_0_debug
 PORT S_AXI_ACLK = clk_50_0000MHzPLL0
 PORT Debug_SYS_Rst = proc_sys_reset_0_MB_Debug_Sys_Rst
END

BEGIN axi_uartlite
 PARAMETER INSTANCE = RS232_Uart_1
 PARAMETER HW_VER = 1.01.a
 PARAMETER C_BAUDRATE = 115200
 PARAMETER C_DATA_BITS = 8
 PARAMETER C_USE_PARITY = 0
 PARAMETER C_ODD_PARITY = 1
 PARAMETER C_INTERCONNECT_S_AXI_AW_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_AR_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_W_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_R_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_B_REGISTER = 1
 PARAMETER C_BASEADDR = 0x40600000
 PARAMETER C_HIGHADDR = 0x4060ffff
 BUS_INTERFACE S_AXI = axi4lite_0
 PORT TX = RS232_Uart_1_sout
 PORT RX = RS232_Uart_1_sin
 PORT S_AXI_ACLK = clk_50_0000MHzPLL0
 PORT Interrupt = RS232_Uart_1_Interrupt
END

BEGIN axi_gpio
 PARAMETER INSTANCE = LEDs_4Bits
 PARAMETER HW_VER = 1.01.a
 PARAMETER C_GPIO_WIDTH = 4
 PARAMETER C_ALL_INPUTS = 0
 PARAMETER C_INTERRUPT_PRESENT = 0
 PARAMETER C_IS_DUAL = 0
 PARAMETER C_INTERCONNECT_S_AXI_AW_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_AR_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_W_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_R_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_B_REGISTER = 1
 PARAMETER C_BASEADDR = 0x40020000
 PARAMETER C_HIGHADDR = 0x4002ffff
 BUS_INTERFACE S_AXI = axi4lite_0
 PORT GPIO_IO_O = LEDs_4Bits_TRI_O
 PORT S_AXI_ACLK = clk_50_0000MHzPLL0
END

BEGIN axi_gpio
 PARAMETER INSTANCE = Push_Buttons_4Bits
 PARAMETER HW_VER = 1.01.a
 PARAMETER C_GPIO_WIDTH = 4
 PARAMETER C_ALL_INPUTS = 1
 PARAMETER C_INTERRUPT_PRESENT = 1
 PARAMETER C_IS_DUAL = 0
 PARAMETER C_INTERCONNECT_S_AXI_AW_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_AR_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_W_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_R_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_B_REGISTER = 1
 PARAMETER C_BASEADDR = 0x40000000
 PARAMETER C_HIGHADDR = 0x4000ffff
 BUS_INTERFACE S_AXI = axi4lite_0
 PORT GPIO_IO_I = Push_Buttons_4Bits_TRI_I
 PORT S_AXI_ACLK = clk_50_0000MHzPLL0
 PORT IP2INTC_Irpt = Push_Buttons_4Bits_IP2INTC_Irpt
END

BEGIN axi_ethernetlite
 PARAMETER INSTANCE = Ethernet_Lite
 PARAMETER HW_VER = 1.00.a
 PARAMETER C_INTERCONNECT_S_AXI_AW_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_AR_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_W_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_R_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_B_REGISTER = 1
 PARAMETER C_BASEADDR = 0x40e00000
 PARAMETER C_HIGHADDR = 0x40e0ffff
 BUS_INTERFACE S_AXI = axi4lite_0
 PORT PHY_MDIO = Ethernet_Lite_MDIO
 PORT PHY_MDC = Ethernet_Lite_MDC
 PORT PHY_tx_data = Ethernet_Lite_TXD
 PORT PHY_tx_en = Ethernet_Lite_TX_EN
 PORT PHY_tx_clk = Ethernet_Lite_TX_CLK
 PORT PHY_col = Ethernet_Lite_COL
 PORT PHY_rx_data = Ethernet_Lite_RXD
 PORT PHY_rx_er = Ethernet_Lite_RX_ER
 PORT PHY_rx_clk = Ethernet_Lite_RX_CLK
 PORT PHY_crs = Ethernet_Lite_CRS
 PORT PHY_dv = Ethernet_Lite_RX_DV
 PORT PHY_rst_n = Ethernet_Lite_PHY_RST_N
 PORT S_AXI_ACLK = clk_50_0000MHzPLL0
 PORT IP2INTC_Irpt = Ethernet_Lite_IP2INTC_Irpt
END

BEGIN axi_timer
 PARAMETER INSTANCE = axi_timer_0
 PARAMETER HW_VER = 1.01.a
 PARAMETER C_COUNT_WIDTH = 32
 PARAMETER C_ONE_TIMER_ONLY = 0
 PARAMETER C_INTERCONNECT_S_AXI_AW_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_AR_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_W_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_R_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_B_REGISTER = 1
 PARAMETER C_BASEADDR = 0x41c00000
 PARAMETER C_HIGHADDR = 0x41c0ffff
 BUS_INTERFACE S_AXI = axi4lite_0
 PORT S_AXI_ACLK = clk_50_0000MHzPLL0
 PORT Interrupt = axi_timer_0_Interrupt
END

BEGIN axi_bram_ctrl
 PARAMETER INSTANCE = axi_bram_ctrl_0
 PARAMETER HW_VER = 1.02.a
 PARAMETER C_INTERCONNECT_S_AXI_MASTERS = microblaze_0.M_AXI_DC & microblaze_0.M_AXI_IC
 PARAMETER C_INTERCONNECT_S_AXI_AW_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_AR_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_W_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_R_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_B_REGISTER = 1
 PARAMETER C_S_AXI_BASEADDR = 0xC4000000
 PARAMETER C_S_AXI_HIGHADDR = 0xC400FFFF
 BUS_INTERFACE BRAM_PORTA = axi_bram_ctrl_0_bram_porta_2_axi_bram_ctrl_0_bram_block_porta
 BUS_INTERFACE BRAM_PORTB = axi_bram_ctrl_0_bram_portb_2_axi_bram_ctrl_0_bram_block_portb
 BUS_INTERFACE S_AXI = axi4_0
 PORT S_AXI_ACLK = clk_100_0000MHzPLL0
END

BEGIN bram_block
 PARAMETER INSTANCE = axi_bram_ctrl_0_bram_block
 PARAMETER HW_VER = 1.00.a
 BUS_INTERFACE PORTA = axi_bram_ctrl_0_bram_porta_2_axi_bram_ctrl_0_bram_block_porta
 BUS_INTERFACE PORTB = axi_bram_ctrl_0_bram_portb_2_axi_bram_ctrl_0_bram_block_portb
END

BEGIN axi_intc
 PARAMETER INSTANCE = microblaze_0_intc
 PARAMETER HW_VER = 1.01.a
 PARAMETER C_INTERCONNECT_S_AXI_AW_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_AR_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_W_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_R_REGISTER = 1
 PARAMETER C_INTERCONNECT_S_AXI_B_REGISTER = 1
 PARAMETER C_BASEADDR = 0x41200000
 PARAMETER C_HIGHADDR = 0x4120ffff
 BUS_INTERFACE S_AXI = axi4lite_0
 PORT IRQ = microblaze_0_interrupt
 PORT S_AXI_ACLK = clk_50_0000MHzPLL0
 PORT INTR = RS232_Uart_1_Interrupt & Push_Buttons_4Bits_IP2INTC_Irpt & Ethernet_Lite_IP2INTC_Irpt & axi_timer_0_Interrupt
END