/*
 * FreeRTOS V202212.00
 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * https://www.FreeRTOS.org
 * https://github.com/FreeRTOS
 *
 */

/*
 *  NOTE : Tasks run in system mode and the scheduler runs in Supervisor mode.
 *  The processor MUST be in supervisor mode when vTaskStartScheduler is
 *  called.  The demo applications included in the FreeRTOS.org download switch
 *  to supervisor mode prior to main being called.  If you are not using one of
 *  these demo application projects then ensure Supervisor mode is used.
 */


/*
 * Creates all the demo application tasks, then starts the scheduler.  The WEB
 * documentation provides more details of the demo application tasks.
 *
 * Main.c also creates a task called "Check".  This only executes every three
 * seconds but has the highest priority so is guaranteed to get processor time.
 * Its main function is to check that all the other tasks are still operational.
 * Each task (other than the "flash" tasks) maintains a unique count that is
 * incremented each time the task successfully completes its function.  Should
 * any error occur within such a task the count is permanently halted.  The
 * check task inspects the count of each task to ensure it has changed since
 * the last time the check task executed.  If all the count variables have
 * changed all the tasks are still executing error free, and the check task
 * toggles the onboard LED.  Should any task contain an error at any time
 * the LED toggle rate will change from 3 seconds to 500ms.
 *
 */

/* Standard includes. */
#include <stdlib.h>

/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"

/* Demo application includes. */
#include "partest.h"
#include "flash.h"
#include "comtest2.h"
#include "serial.h"
#include "PollQ.h"
#include "BlockQ.h"
#include "semtest.h"
#include "dynamic.h"

/*-----------------------------------------------------------*/

/* Constants to setup I/O and processor. */
#define mainTX_ENABLE                ( ( unsigned long ) 0x00010000 ) /* UART1. */
#define mainRX_ENABLE                ( ( unsigned long ) 0x00040000 ) /* UART1. */
#define mainBUS_CLK_FULL             ( ( unsigned char ) 0x01 )
#define mainLED_TO_OUTPUT            ( ( unsigned long ) 0xff0000 )

/* Constants for the ComTest demo application tasks. */
#define mainCOM_TEST_BAUD_RATE       ( ( unsigned long ) 115200 )
#define mainCOM_TEST_LED             ( 3 )

/* Priorities for the demo application tasks. */
#define mainLED_TASK_PRIORITY        ( tskIDLE_PRIORITY + 2 )
#define mainCOM_TEST_PRIORITY        ( tskIDLE_PRIORITY + 2 )
#define mainQUEUE_POLL_PRIORITY      ( tskIDLE_PRIORITY + 2 )
#define mainBLOCK_Q_PRIORITY         ( tskIDLE_PRIORITY + 2 )
#define mainSEM_TEST_PRIORITY        ( tskIDLE_PRIORITY + 1 )
#define mainCHECK_TASK_PRIORITY      ( tskIDLE_PRIORITY + 3 )

/* Constants used by the "check" task.  As described at the head of this file
 * the check task toggles an LED.  The rate at which the LED flashes is used to
 * indicate whether an error has been detected or not.  If the LED toggles every
 * 3 seconds then no errors have been detected.  If the rate increases to 500ms
 * then an error has been detected in at least one of the demo application tasks. */
#define mainCHECK_LED                ( 7 )
#define mainNO_ERROR_FLASH_PERIOD    ( ( TickType_t ) 3000 / portTICK_PERIOD_MS )
#define mainERROR_FLASH_PERIOD       ( ( TickType_t ) 500 / portTICK_PERIOD_MS )

/*-----------------------------------------------------------*/

/*
 * Checks that all the demo application tasks are still executing without error
 * - as described at the top of the file.
 */
static long prvCheckOtherTasksAreStillRunning( void );

/*
 * The task that executes at the highest priority and calls
 * prvCheckOtherTasksAreStillRunning().  See the description at the top
 * of the file.
 */
static void vErrorChecks( void * pvParameters );

/*
 * Configure the processor for use with the Keil demo board.  This is very
 * minimal as most of the setup is managed by the settings in the project
 * file.
 */
static void prvSetupHardware( void );

/*-----------------------------------------------------------*/



/*
 * Application entry point:
 * Starts all the other tasks, then starts the scheduler.
 */
int main( void )
{
    /* Setup the hardware for use with the Keil demo board. */
    prvSetupHardware();

    /* Start the demo/test application tasks. */
    vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
    vStartLEDFlashTasks( mainLED_TASK_PRIORITY );
    vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
    vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
    vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
    vStartDynamicPriorityTasks();

    /* Start the check task - which is defined in this file.  This is the task
     * that periodically checks to see that all the other tasks are executing
     * without error. */
    xTaskCreate( vErrorChecks, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );

    /* Now all the tasks have been started - start the scheduler.
     *
     * NOTE : Tasks run in system mode and the scheduler runs in Supervisor mode.
     * The processor MUST be in supervisor mode when vTaskStartScheduler is
     * called.  The demo applications included in the FreeRTOS.org download switch
     * to supervisor mode prior to main being called.  If you are not using one of
     * these demo application projects then ensure Supervisor mode is used here. */
    vTaskStartScheduler();

    /* Should never reach here!  If you do then there was not enough heap
     * available for the idle task to be created. */
    for( ; ; )
    {
    }
}
/*-----------------------------------------------------------*/

static void vErrorChecks( void * pvParameters )
{
    TickType_t xDelayPeriod = mainNO_ERROR_FLASH_PERIOD;

    /* Parameters are not used. */
    ( void ) pvParameters;

    /* Cycle for ever, delaying then checking all the other tasks are still
     * operating without error.  If an error is detected then the delay period
     * is decreased from mainNO_ERROR_FLASH_PERIOD to mainERROR_FLASH_PERIOD so
     * the on board LED flash rate will increase.
     *
     * This task runs at the highest priority. */

    for( ; ; )
    {
        /* The period of the delay depends on whether an error has been
         * detected or not.  If an error has been detected then the period
         * is reduced to increase the LED flash rate. */
        vTaskDelay( xDelayPeriod );

        if( prvCheckOtherTasksAreStillRunning() != pdPASS )
        {
            /* An error has been detected in one of the tasks - flash faster. */
            xDelayPeriod = mainERROR_FLASH_PERIOD;
        }

        /* Toggle the LED before going back to wait for the next cycle. */
        vParTestToggleLED( mainCHECK_LED );
    }
}
/*-----------------------------------------------------------*/

static void prvSetupHardware( void )
{
    /* Perform the hardware setup required.  This is minimal as most of the
     * setup is managed by the settings in the project file. */

    /* Configure the UART1 pins.  All other pins remain at their default of 0. */
    PINSEL0 |= mainTX_ENABLE;
    PINSEL0 |= mainRX_ENABLE;

    /* LED pins need to be output. */
    IODIR1 = mainLED_TO_OUTPUT;

    /* Setup the peripheral bus to be the same as the PLL output. */
    VPBDIV = mainBUS_CLK_FULL;
}
/*-----------------------------------------------------------*/

static long prvCheckOtherTasksAreStillRunning( void )
{
    long lReturn = pdPASS;

    /* Check all the demo tasks (other than the flash tasks) to ensure
     * that they are all still running, and that none of them have detected
     * an error. */
    if( xAreComTestTasksStillRunning() != pdPASS )
    {
        lReturn = pdFAIL;
    }

    if( xArePollingQueuesStillRunning() != pdTRUE )
    {
        lReturn = pdFAIL;
    }

    if( xAreBlockingQueuesStillRunning() != pdTRUE )
    {
        lReturn = pdFAIL;
    }

    if( xAreSemaphoreTasksStillRunning() != pdTRUE )
    {
        lReturn = pdFAIL;
    }

    if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
    {
        lReturn = pdFAIL;
    }

    return lReturn;
}
/*-----------------------------------------------------------*/