Richard Barry
c2bfac68b3
Add link to documentation page inside main_full() of the SAM4E demo.
2013-11-17 15:40:56 +00:00
Richard Barry
0cbd5182a3
Add additional comments to SAM4E demo.
2013-11-17 14:14:22 +00:00
Richard Barry
0865907f3f
Add graphics to the SAM4E demo.
2013-11-16 22:33:51 +00:00
Richard Barry
9e9f9f30b1
Add UDP related commands to SAM4E demo.
2013-11-16 19:19:18 +00:00
Richard Barry
b690b26861
Add standard demo tasks to SAM4E demo.
2013-11-16 18:06:57 +00:00
Richard Barry
dc2e20bb0a
Add SAM4E-EK demo with UDP and CLI. Not yet complete.
2013-11-16 13:27:44 +00:00
Richard Barry
a37b947615
Reorder the license text wording so the exception text is at the top rather than the bottom.
2013-11-12 17:26:08 +00:00
Richard Barry
a2cfaa7cd9
Correct build of helper function for ports where the stack grows up.
2013-11-12 13:06:18 +00:00
Richard Barry
8320dfb885
Update the SAM4L low power demo to use the ASF enable/disable interrupts functions rather than manipulating the PIRMASK directly - and in so doing allow other ASF functions to be called with the interrupt enable bit nesting.
2013-11-11 14:49:36 +00:00
Richard Barry
0cd79ad81d
Change version numbers in preparation for V7.6.0 release.
2013-11-08 11:47:35 +00:00
Richard Barry
c44d12dadb
Ensure the Win32 demo runs in co-operative mode.
2013-11-08 10:11:46 +00:00
Richard Barry
b1b4b15353
Add configASSERT()s to ensure counting semaphores are not created with a max count of zero or an initial count greater than the max count.
2013-11-07 16:45:30 +00:00
Richard Barry
b181a3af99
Ensure the definition of prvTaskExitError()does not result in a compiler warning in ports where its use can be overridden (GCC Cortex-M ports).
...
Remove duplicate save/restore of r14 in Cortex-M4F ports.
2013-11-07 16:43:54 +00:00
Richard Barry
20eb03ed7d
Change behaviour when configUSE_PREEMPTION is 0 (preemption is turned off). See the change history in the next release for details.
...
Remove an erroneous const in the prototype of queue receive/peek functions.
2013-11-07 14:58:14 +00:00
Richard Barry
30bc6c01a9
Add ehb instructions back into PIC32 port layer (upon advice).
...
Add configCLEAR_TICK_TIMER_INTERRUPT into PIC32 port layer to allow the timer configuration to be changed without any edits to the port layer being required.
Add prvTaskExitError() into the PIC32 port layer to trap tasks that attempt to exit from their implementing function.
Provide the ability to trap interrupt stack overflows in the PIC32 port.
Radically improve the timing in the Win32 simulator port layer.
2013-11-07 14:16:32 +00:00
Richard Barry
40d2e74417
Update some standard demo task implementations so they can be used with the cooperative scheduler.
2013-11-07 14:04:05 +00:00
Richard Barry
5aabe4f8fb
Update semtest.c to use xSemaphoreCreateBinary() in place of vSemaphoreCreateBinary.
2013-11-07 11:11:18 +00:00
Richard Barry
dcf261a3e6
Add xSemaphoreCreateBinary() so vSemaphoreCreate() can be deprecated.
2013-11-07 10:53:23 +00:00
Richard Barry
ca2191c6ee
Ensure PIC32MX MPLAB 8 project builds with XC.
2013-11-07 10:16:15 +00:00
Richard Barry
9a0f2bda55
Update PIC32 MPLAB8 project so it builds with the new partest file names.
2013-11-07 10:11:06 +00:00
Richard Barry
1b7a2e40a3
Update PIC32MX demo:
...
Change configCHECK_FOR_STACK_OVERFLOW to 3 to also check the interrupt stack.
Add a build configuration to allow use on the PIC32 USBII starter kit.
Increase some delays when talking to the LCD to ensure it always displays correctly.
Rewrite the register test tasks.
2013-11-07 09:54:13 +00:00
Richard Barry
2ee43fbc64
Set the MSVC Win32 demo back to create the simply blinky demo by default.
...
Set the MingW Wind32 demo back to include the #error to remind people to run the CreateProjectDirectoryStructure batch file.
2013-10-29 12:40:12 +00:00
Richard Barry
73df0ffdff
Update the Eclipse/MingW project to account for the new Win32 simulator port layer (which has better timing).
2013-10-29 12:32:04 +00:00
Richard Barry
15d10ce094
Update the main Win32 MSVC demo to account for the changes to the Win32 port layer (more accurate timing).
2013-10-29 11:14:54 +00:00
Richard Barry
63bd3ebbef
Remove the SVC handler from the XMC1000 demo as it is no longer used by the Cortex-M0 port layer.
2013-10-22 11:27:43 +00:00
Richard Barry
dcd261bb8b
Update the Keil and IAR CM0 port layers to match the changes made to the GCC version.
2013-10-22 11:26:16 +00:00
Richard Barry
7bcbef721b
Remove the SVC handler from the SAMD20 FreeRTOSConfig.h as the GCC Cortex-M0 port no longer uses it.
2013-10-22 10:58:23 +00:00
Richard Barry
41fe693968
Improve how the scheduler is started in the GCC Cortex-M0 port.
2013-10-22 09:50:20 +00:00
Richard Barry
f64acd6a48
Added an additional configASSERT() to test the new eTaskGetState() behaviour (see previous checking comment).
2013-10-22 09:33:49 +00:00
Richard Barry
25bab250b6
Added a little intelligence to eTaskGetState() so it can distinguish between a suspended task and a task that is indefinitely blocked on an event.
2013-10-22 09:30:58 +00:00
Richard Barry
bafda11518
Remove maths library dependency form SAMD20 project.
2013-10-14 20:12:48 +00:00
Richard Barry
a12ea2d212
Update FreeRTOS version number to V7.5.3
...
Update FreeRTOS+CLI version number to V1.0.2
Update FreeRTOS+UDP version number to V1.0.1
2013-10-14 19:56:47 +00:00
Richard Barry
94607d83f9
Add workaround to XMC4000 silicon bug to Tasking Cortex-M4F port layer.
2013-10-14 14:03:05 +00:00
Richard Barry
c1353bb12d
Complete XMC4000 Tasking project.
2013-10-14 13:46:47 +00:00
Richard Barry
b887737c34
Fix broken link in Atmel Studio SAMD20 project.
2013-10-12 10:09:10 +00:00
Richard Barry
c09f6e6a9b
Increase minimal stack size for the SAMD20 demo.
2013-10-09 18:46:08 +00:00
Richard Barry
dcea05a81c
Complete tidy up of SAMD20 demo.
2013-10-09 13:26:34 +00:00
Richard Barry
41a1dc62b7
Complete SAMD20 demo - still needs tidy up.
...
Add comments to the XMC1000 reg test files.
2013-10-08 15:56:06 +00:00
Richard Barry
0c56f5018d
Add some defensive programming in the default tickless mode in case the application supplied post tick hook takes a long time to complete.
2013-10-08 12:33:46 +00:00
Richard Barry
aedf7824cb
Introduce the prvTaskExitError() function for all ARM_CMn ports.
...
Introduce the configTASK_RETURN_ADDRESS macro for the GCC ARM_CMn ports.
Improve time slippage penalty when entering tickless mode is abandoned.
2013-10-08 11:30:40 +00:00
Richard Barry
eaacbb099a
Clear up a few compiler warnings.
...
Correct header comments in the UARTCommandConsole.c file used in the SmartFusion2 demo.
Exercise the new xQueueSpacesAvailable() function in the MSVC demo.
Add defaults for the new traceMALLOC and traceFREE trace macros.
Catch tasks trying to exit their functions in the Cortex-M0 ports.
Add additional comments to timers.c in response to a support forum question.
Initialise _impure_ptr prior to the first task being started.
Prior to V7.5.0 a yield pended in the tick hook would have occurred during the same tick interrupt. Return pdTRUE from xTaskIncrementTick() if a yield is pending to revert to that behaviour.
2013-10-07 12:06:17 +00:00
Richard Barry
7ec4773131
Add traceMALLOC() and traceFREE() macros.
2013-10-04 20:56:45 +00:00
Richard Barry
23fa077241
Complete CLI demo on SAMD20.
2013-10-03 15:41:33 +00:00
Richard Barry
8ffa1b1736
Get CLI functioning in SAMD20 demo.
2013-10-02 14:24:38 +00:00
Richard Barry
013a3ef944
Starting point for the SAMD20 demo.
2013-10-02 10:41:40 +00:00
Richard Barry
111283a9b2
Finalise XMC4000 GCC demos.
2013-10-01 12:47:27 +00:00
Richard Barry
0185643b39
Finalise XMC4000 IAR demos.
2013-10-01 10:10:15 +00:00
Richard Barry
1e248417bc
Finalise XMC4000 Keil demos.
2013-10-01 09:53:12 +00:00
Richard Barry
db1a5f1553
Add the configUSE_STATS_FORMATTING_FUNCTIONS parameter to a couple of FreeRTOSConfig.h header files that got missed out when the parameter was introduced.
2013-09-17 09:48:51 +00:00
Richard Barry
988b0c1678
Remove the math library as a build dependency in the SAM4L demo.
2013-09-17 09:05:31 +00:00
