* Fix code to match comment; idle prioriry task should not block to yield, as then it will hardly run at all (bug affects SMP tests)
* Add RP2040 Demo - can be used for 'main' or 'smp' branch of FreeRTOS_Kernel
* move to latest main/ of FreeRTOS-Kernel
* move RP2040 demos into Community-Supported
* Update whitespace issue
Co-authored-by: Gaurav-Aggarwal-AWS <33462878+aggarg@users.noreply.github.com>
* Add SMP to lexicon
Co-authored-by: Gaurav-Aggarwal-AWS <33462878+aggarg@users.noreply.github.com>
* Added spell check
* All words
* Add a missing word
* Fix header checks
* Fix header checks v1
* Fix header check v2
* Updated freertos link in header
* Fixed afr link in the header
* Fix last of header checks
* Update the spell check script to check amazon licensed files only
* Fixed paths and added comments
* Try with modified repo
* Add inplace substitute option to sed
* Use official repo as the spell checker source
* Add vendor file to the ignored list
Co-authored-by: root <root@ip-172-31-5-28.us-west-2.compute.internal>
* Add test for backlogged auto-reset timer
Must call vTimerDemoIncludeBacklogTests() to activate.
* Fix little style issues
- Update to new header
- Add parentheses (style)
- Remove trailing space accidentally introduced
* Don't verify full clearing of backlog
The timer task should be free to process the stop request without a
specific requirement to work through the backlog of callbacks for the
stopped timer. The timer task should be allowed to cancel the entire
backlog, part of it, or none of it. In other words, once the
application sends the stop request, it should not depend on receiving
any more callbacks, even backlogged ones.
The only requirement here is that the timer stop as requested.
Co-authored-by: Joseph Julicher <jjulicher@mac.com>
Co-authored-by: Cobus van Eeden <35851496+cobusve@users.noreply.github.com>
* Introduce tasks that test the coherency of the reported space available in a message buffer from two separate tasks. Designed to highlight the issue reported in https://github.com/FreeRTOS/FreeRTOS-Kernel/pull/264
Introduce configRUN_ADDITIONAL_TESTS which must be set to 1 to run the new tests. That is because the new tests got added to an existing standard demo file and smaller platforms may not have the resources to run them.
Set configRUN_ADDITIONAL_TESTS to 1 in the MSVC and IAR/QEMU project so both project run the new test.
Also add missing 'volatile' qualifier in the IAR/QEMU project on some register accesses.
* Update xAreMessageBufferTasksStillRunning() to report errors from the new message buffer size coherency tests.
Co-authored-by: RichardBarry <ribarry@amazon.com>
Co-authored-by: RichardBarry <3073890+RichardBarry@users.noreply.github.com>
* Moved definition of ucBufferStorage out of if macro. If ucBufferStorage is only defined when configSUPPORT_STATIC_ALLOCATION ist set to 1, compilation will fail in cases where it is set to 0 or not defined (because it defaults to 0, as described in the documenation).
* Update AbortDelay.c so it uses both vTaskDelayUntil() and xTaskDelayUntil().
Update TaskNotifyArray.c to prevent false positive test failures that appear to be caused by unwarranted integer promotion.
Add use of xTaskDelayUntil() to blocktim.c
The rendezvous test in EventGroupsDemo assumed that one tick is not
enough for rendezvous to complete. Turns out that it is not true on a
system with 1ms tick and rendezvous does get complete within one tick.
This commit removes the test with one tick assumption.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
* Add Eclipse/GCC project that targets the LM3S8962 QEMU model.
* Get the Cortex-M QEMU project working.
* Continue working on making stream buffer demo more robust and QEMU project.
* Rename directory CORTEX_LM3S8986_QEMU to CORTEX_LM3S6965_QEMU.
Work on making the Stream Buffer tests more robust.
Check in before adding in the trace recorder.
* Rename CORTEX_LM3S6969_QEMU to CORTEX_LM3S6969_GCC_QEMU.
* Make the StreamBufferDemo.c common demo file (test file) more robust to other test tasks running at an equally high priority.
* Work in progress checkin only - comments in main.c are incorrect.
* Correct comments at the top of FreeRTOS/Demo/CORTEX_LM3S6965_GCC_QEMU/main.c
Make the message buffer tests more robust in the case the a message buffer becomes full when prvSenderTask() has a higher priority than the reader task.
* Disable trace recorder in the LM3S6965 QEMU demo.
* I'm dropping FreeRTOS-Kernel reference update, since this seems to break the CMBC CI.
Co-authored-by: Yuhui Zheng <10982575+yuhui-zheng@users.noreply.github.com>
* Added explicit cast to allow roll over and avoid integer promotion during cycles counters comparison in recmutex.c.
* Fixed type mismatch between declaration and definition of function xAreSemaphoreTasksStillRunning( void ).
* Added Atmel Studio demo projects for ATMega4809 and AVR128DA48.
* Per https://www.freertos.org/upgrading-to-FreeRTOS-V8.html, I'm updating portBASE_TYPE to BaseType_t.
Signed-off-by: Yuhui Zheng <10982575+yuhui-zheng@users.noreply.github.com>
* Update register test for ATmega4809
- to cover r28, r29, r31.
- call public API taskYIELD() instead of portYIELD().
* Update ATmega4809 readme.md to include info for serial port setup, and minor wording fix.
Co-authored-by: Alexandru Niculae - M17336 <alexandru.niculae@microchip.com>
* Add TaskNotifyArray.c with the single task tests updated to use the task notification array up to the point where the timer is created.
* Continue working on TaskNotifyArray.c to test the new task notification indexes. Next TaskNotifyArray.c will be refactored to break the tests up a bit.
* Refactor and update the comments in TaskNotifyArray.c - no functional changes.
* Change from the task notify "array" to task notification "indexed" nomenclature in the new task notification API functions that work on one particular task notification with the array of task notifications.
* Update the implementation of the taskNOTIFY_TAKE() and taskNOTIFY_WAIT() trace macros to take the array index of the task notification they are acting on.
Rename configNUMBER_OF_TASK_NOTIFICATIONS to configTASK_NOTIFICATION_ARRAY_ENTRIES.
Add FreeRTOS/Demo/Common/Minimal/TaskNotifyArray.c to the Visual Studio project - the file implements tests specific to the behaviour of the indexed task notification functions and should be used in addition to the tests already provided in FreeRTOS/Demo/Common/Minimal/TaskNotify.c.
Added tests for xTaskAbortDelayFromISR() into Demo/Common/Minimal/AbortDelay.c.
Added tests for ulTaskNotifyValueClear() into Demo/Common/Minimal/TaskNotify.c.
+ Added xTaskCatchUpTicks() which corrects the tick count value after the application code has held interrupts disabled for an extended period.
+ Updated the xTaskResumeAll() implementation so it uses the new xTaskCatchUpTicks() function mentioned above to unwind ticks that were pended while the scheduler was suspended.
+ Various maintenance on the message buffer, stream buffer and abort delay demos.
+ Change type of uxPendedTicks from UBaseType_t to TickType_t to ensure it has same type as variables it is compared to, and therefore also rename the variable xPendingTicks.
+ Correct spelling mistake within a comment that was common to all the ARMv7-M ports.
Ensure tasks that are blocked indefinitely on a direct to task notification return their state as eBlocked, previously was returned as eSuspended - making its behaviour consistent with event objects.
Fix typo in stream_buffer.c where "size_t xBytesAvailable ); PRIVILEGED_FUNCTION" had the semicolon in the wrong place.
Add testing of Stream Buffers to the AbortDelay.c tests.
Guard inclusion of C code when FreeRTOSConfig.h is included from an assembly file in the ARM7_LPC2129_IAR demo.
Fix minor typos in the Windows demo comment blocks.
Update the MingW/Eclipse project to add a code coverage build configuration in addition to the existing Debug build configuration.
Update StreamBufferDemo.c so functions are called directly, rather than via configASSERT(), so their code coverage can be measured when configASSERT() is not defined.
In the Win32 port, replace the call to TerminateProcess() in vPortEndScheduler() with exit( 0 ) - which triggers the writing of the code coverage data to the disk.
Fix bug in ucStreamBufferGetStreamBufferType() - which is only used by the Percepio trace tool.
Update the line within vTaskStartScheduler() that was setting xTickCount to 0 to instead set it to configINITIAL_TICK_COUNT.
Update queue code to allow an overwrite operation on a queue that is in a queue set, and add prvTestQueueOverwriteWithQueueSet() to test function.
Update Eclipse Win32 project to bring it closer the the Visual Studio equivalent.
